Mounting plate air inlet for CB antenna Land Rover Defender, for left-hand drive (LHD)
Defender CB antenna mount – air intake mount, magnetic or fixed This mounting plate optimally attaches a CB antenna to the air intake of the Land Rover Defender. For this purpose, the mounting plate is installed on the left (as seen from the driver's seat) ventilation grille / on the air inlet. For right-hand drive vehicles (UK), please contact us by phone or e-mail. Please select the suitable variant for you: fixed mounting or as a magnet. Delivery: mounting plate 1 m ground cable mounting material
Prices incl. VAT;
Radio remote control for AUTOTERM parking heater
Radio remote control for AUTOTERM parking heaters With the included module and the certified radio remote control, you can control AUTOTERM Luft 2D and 4D (= Planar 2D12, Planar 44D12) parking heaters with 4 cables and AUTOTERM Flow 14S (=14TC-Mini) diesel pre-heaters by radio remote control. Think ahead and start the parking heater before you start your journey! Do you hate freezing while driving and are annoyed that it is only warm once you have arrived at your destination? Then these remote controls are perfect for you! With the included module and the radio transmitters, you can control 12-volt AUTOTERM parking heaters, parking heaters with 4 cables and AUTOTERM Flow 14D (formerly 14TC-Mini) diesel pre-heaters by radio remote control! The scope of delivery includes 2 transmitters and, of course, the module for connection to the parking heater. Scope of delivery: 2 transmitters Module for 12 volt Planar parking heaters incl. connection diagram All modems or radio remote controls are connected to the brown and white cable of the Planar. The Simcom has a prepared plug connection. The PU5 or PU27 control units can still be used. In contrast to other suppliers, our radio remote control is specially designed for Planar heaters and the receiver is housed in a waterproof and shockproof casing. Please note the legal information on batteries HERE. For certain types of batteries, we are legally obliged to charge a deposit.
Prices incl. VAT;
Alan PL259/6 connector, for RG58 coaxial cable
Alan PL259/6 plug, for RG58 coaxial cable PL259/6 plug, double pack, for assembling RG58 antenna cables.Required for the Alan ML130 and Alan ML145 magnetic antenna.
Prices incl. VAT;
Alan Funk 90 CB antenna for fixed mounting, length approx. 90cm, 200W, 4m cable with DV connector
Radio 90 CB antenna for fixed mounting Technical data: Length approx. 90 cm 200 W 4 m cable with DV plug 1/4 lambda The antenna has an open-ended cable to make it easier to lay the cable. A PL259/6 plug for RG58 coaxial cable is required for connection to a radio.
Prices incl. VAT;
Mounting plate air inlet for CB antenna fixed mounting, for right-hand drive (RHD)
Plate for mounting a CB radio antenna on the air intake (RHD) This mounting plate ensures optimum mounting of a CB antenna on the air intake of the Land Rover Defender. For this purpose, the mounting plate is installed on the right-hand (as seen from the driver's seat) ventilation grille / air intake. For left-hand drive vehicles, you can find the mounting plate here in our shop. As the Defender is made of aluminium, unfortunately no magnetic antenna base will hold. We have therefore designed a plate made of sheet steel with a suitable opening for the cable. This plate allows you to attach an antenna with a magnetic base, which you can easily remove if necessary. Scope of delivery: - Mounting plate - 1 m ground cable - Mounting material
Prices incl. VAT;
Remote control for the power supply of 8 additional electrical products
Efficient wiring: Control up to 8 consumers centrally and wirelessly Converting your 4x4 into a camper van or a utility vehicle is a tricky job, nearly impossible to plan in all its details from the outset. Only with time you’ll realize where switches should have gone or that an additional lamp or ancillary device could have been put somewhere else instead. Or there are safety regulations that prevent you from wiring certain switches into your dashboard, e.g. work or camping lights that mustn’t be switched on inadvertently while driving. And that’s when you simply decide to live with the compromises and inferior solutions because you simply dread the thought of having to re-wire everything. If you know this situation, the Wireless Connect RSU60 by Ring is for you. It lets you wire up to 8 devices easily and quickly into the tech hub, a centrally located connector panel, without the need for separate wiring of switches. All connected devices like lamps, gadgets and mechanisms are operated wireless by one remote control, wherever it is convenient. This comfortable and efficient system saves you time and materials and spares your nerves as well when something goes wrong or stops working. Faulty connections or other glitches can be easily traced from the one central tech hub, eliminating the need to take half the car apart as with hardwired solutions fitted behind dashboards and paneling or inside struts or conduits. The 12 V tech hub boasts a maximum ampage of 60 A and is designed for parallel operation of several devices. All connections are individually fused and a manual override guarantees additional safety. Moreover, battery protection ensures that battery voltage is constantly maintained and depletion is prevented. The remote switch buttons can be allocated as necessary and individually identified by an included set of stickers with different icons. The remote also features user-friendly backlit illumination, status lights and a sleep mode. Pairing the remote with the hub is as simple as pressing two buttons and unique signal pairing means that you can operate the same functions on the hub with two remote controls, one in the cabin and one in the back for example. This increases both comfort and safety. The remote is kept and charged in an included docking station.
Prices incl. VAT;
Alan radio 150 CB antenna for fixed mounting
Permanently good reception with the CB fixed mounting antenna The 1/4 lambda antenna is easy to mount and offers a wide bandwidth incl. DV connection. It consists of a stainless steel radiator with flux points and a wing nut. The standing wave ratio is preset and can be changed by changing the radiator length. Mounting instructions: Drill a hole with a diameter of 12 mm at a point on the vehicle body.Deburr the hole and ensure a good conductive connection of the antenna flux.Then insert the antenna base from the outside of the body into the hole so that the corrugated side of the antenna joint faces the outside of the vehicle. Fit the plastic washer and the metal trident washer the right way round. Fit the toothed washer and screw on the nut loosely After aligning the base, tighten the nut on the inside of the body with a spanner Screw on the angle plug with the antenna cable (tip: seal with silicone to permanently seal the mounting point against rust) Mount the radiator with the threaded bolt on the antenna base Technical data: Frequency: MHz 26-28 Type: 1/4 Lambda Power rating: 300 W Radiator length: 130 cm Steel material: Stainless steel SWR Adjustable - SWR adjustment via length change: SWR preset Special features: Plug type DV Total length with base: 138 cm The antenna has a cable with an open end to make it easier to lay the cable. For connection to a radio set you still need a PL259/6 plug for RG58 coaxial cable.
Prices incl. VAT;
Albrecht AE 6110 - Mini CB radio
Mini CB radio with microphone AE6110 from Albrecht The ALBRECHT AE 6110 has all the essential functions that you need. The highlight: With a width of only 10 cm and a height of 2.5 cm, it can easily be accommodated even in the smallest of spaces. With its die-cast housing, it is very stable. New: with integrated VOX function for hands-free speaking in the vehicle Properties: All European CB standards S-meter, 6-level LED indicators for RX and TX VOX hands-free function Receiving sensitivity adjustable (RF gain) Channel 9/19 direct selection button (EMG) Die cast housing 4 watt AM / FM Automatic squelch (ASQ), adjustable in 9 levels Further equipment features: Channel selection buttons on the microphone Channel search (scan) Keylock Socket for external speaker Technical specifications:Dimensions: 102 x 100 x 25 mm³Weight: 450 gSupply voltage: 13.2 V.Power consumption: 2 A max.Operating temperature range: -20 to +50 ° CAntenna input: UHF, SO-239Frequency error: <+/- 300 HzTransmission power: 4 wattsInterference transmissions: <4 nW (-54 dBm)Adjacent channel power: <20 µWFM frequency deviation: <1.9 kHzAM modulation depth: <90%Reception sensitivity: better than 1 μV (20 dB SINAD)Mirror selection: 70 dBAdjacent channel suppression: 60 dBAudio output: 1 watt into 8 ohmsFrequency response: 300-3000 Hz Conversion option for licensed amateur radio operators:10 m amateur radio band, 400 channel mode: 25,610-30,105 MHz, 8 watts Scope of delivery: AE 6110 CB radio, microphone with up / down buttons, microphone holder, mounting bracket with screws, instructions
Prices incl. VAT;
Tent light remote control
Tent light remote control With this remote control, you can switch our 30 cm long tubular tent light or our 90 cm long tubular tent light on and off manually by remote control. The radio connection reaches a little more than 3 metres even through the tent material. You can attach the remote control to a key ring via the small attached carabiner. Please note the legal information on batteries HERE. For certain types of batteries, we are legally obliged to charge a deposit.
Prices incl. VAT;
Alan ML145 magnetic antenna
Magnetic base antenna for CB radio, approx. 145 cm long. Technical data: Type: 5/8 LambdaPower rating: 200 WLength of steel: 148 cmRadiator material: stainless steelMagnetic base: 120 mm diameterThe antenna has a cable with an open end to make it easier to lay the cable. For connection to a radio set you still need a PL259/6 plug for RG58 coaxial cable.
Prices incl. VAT;
CB-Radio VOX Microphone
The Albrecht CB-radio VOX microphone offers the perfect solution for hands-free communication in any vehicle, following § 23 (1a) of the German road traffic regulations. This paragraph outlaws the usage of handheld microphones since the 01.07.2020. This microphone can be used with almost all CB-radios on the market to date. It comes with active noise canceling to filter out any background noise, to guarantee clear communication. The battery lasts about 60h and can charge while in use Details: hands-free communication, following § 23 (1a) of the German road traffic regulations. This paragraph outlaws the usage of handheld microphones since the 01.07.2020 active noise canceling, eliminating irritating background noises VOX sensitivity adjustable in 4 levels VOX delay adjustable in 4 levels impedance: 4.7K ohm sensitivity: -58db 3000mAh battery (rechargable) 60h battery life micro-USB charging port Up/Down button plug: 4-point connector Scope of delivery:VOX microphone, instructions, USB charging cable Compatible with:Midland M10, Midland M Zero Plus, Alan 100 Plus B, diverse Präsident Geräte, Lavayette, etc.
Prices incl. VAT;
Albrecht Racer 90 mobile antenna, 115 cm
This CB mobile antenna scores with good SWR values - the fine-tuning of the SWR values is done by rings. Technical data: CB mobile antenna 1/4 lambda 120 channels Power rating: 40 watts Material: Stainless steel SWR Adjustable YES Length: 115 cm Cable length: 4 metres For fixed mounting The antenna has a cable with an open end to make it easier to lay the cable. For connection to a radio, you still need a PL259/6 plug for RG58 coaxial cable.
Prices incl. VAT;
VOX microphone 4-pole plug Version 2.0
The CB-radio VOX microphone offers the perfect solution for hands-free communication in any vehicle, following § 23 (1a) of the German road traffic regulations. This paragraph outlaws the usage of handheld microphones since the 01.07.2020. This microphone can be used with almost all CB-radios on the market to date. It comes with active noise canceling to filter out any background noise, to guarantee clear communication. The battery lasts about 60h and can charge while in use. Details: hands-free communication, following § 23 (1a) of the German road traffic regulations. This paragraph outlaws the usage of handheld microphones since the 01.07.2020 active noise canceling, eliminating irritating background noises VOX sensitivity adjustable in 4 levels VOX delay adjustable in 4 levels impedance: 4.7K ohm sensitivity: -58db 3000mAh battery (rechargable) 60h battery life micro-USB charging port Up/Down button plug: 4-point connector Scope of delivery:VOX microphone, instructions, USB charging cable Compatible with:Midland M10, Midland M Zero Plus, Alan 100 Plus B, diverse Präsident Geräte, Lavayette, etc.
Prices incl. VAT;
VOX microphone 6-pin
Albrecht CB radio VOX microphones offer the perfect solution for hands-free communication in vehicles in accordance with Section 23 (1a) of the Road Traffic Act, which prohibits the use of microphones by hand in vehicles from July 1st, 2020. These microphones can be used with almost all CB radios on the market. The integrated active noise cancellation function filters out disruptive background noise and offers very clear voice transmission. The integrated battery has an operating time of approx. 60 hours and can also be charged while the microphone is in use. Properties:► for hands-free communication in the vehicle (compliant with § 23 (1a) StVO, which prohibits the use of microphones by hand in vehicles from July 1st, 2020)► Active Noise Cancellation filters out disturbing background noise► VOX sensitivity adjustable in 4 levels► VOX delay adjustable in 4 levels► Impedance: 4.7K ohms► Sensitivity: -58db► Up / Down buttons► integrated battery 3,000 mAh (rechargeable)► Operating time: approx. 60 hours► Can be used while charging► Micro-USB charging socket on the microphone► Connection: 6-pin CB radio plug
Prices incl. VAT;
Adapter for connecting 2 Alan PL259/6 plugs
Adapter for Connecting Two Alan PL259/6 Connectors This adapter allows easy and secure connection of two Alan PL259/6 connectors. Ideal for use in radio communications, antenna installations, or for extending coaxial cables.Made from durable materials to ensure reliable signal transmission and long-lasting performance. Features: Compatible with Alan PL259/6 connectors Compact design Easy to use Perfect for radio and antenna applications
Prices incl. VAT;