HBC Dual battery monitor The dual battery monitor is ideal for monitoring 2 separate batteries (starter and consumer battery). Available with matching plugs and wiring harness for LAND ROVER DEFENDER with 12 V dual battery system as a surface-mounted or built-in version. Nakatanenga has the exclusive distribution rights for the dual battery monitor in Europe. The digital technology used in these monitors makes it possible to accurately reproduce the non-linear characteristics of lead-acid batteries. Using the green button in the centre, you can switch the information output on the display from one battery to the next. The dual battery monitor emits an audible alarm/tone as soon as the battery is either overcharged (14.8 V and above) or over-discharged (12.2 V and below).  The dual battery monitor has been specially developed to be combined with the Cyrix-ct intelligent automatic cut-off relay. Link function: If you press and hold the green button on the dual battery monitor for 10 seconds, both batteries are forcibly switched in parallel for a few minutes, which is particularly useful when operating a winch or when the starter battery is too low (only possible in combination with the Cyrix-ct cut-off relay). Features of the BM2000 dual battery monitor:  Warning in the event of overcharging or excessive discharge  reverse polarity protection   Acoustic alarm (can be muted)  Energy-saving functions (automatic dimming of the screen depending on the ambient light, automatic sleep function = auto-sleep 10-30 minutes after the battery stops running) screws and a template with the distances of the necessary drill holes are included with the built-in version 3 m long cable  Operating elements summarised: Single button press (green button)  = Change information output (from battery 1 to battery 2)   = Mute active alarm. Press and hold button for 3 seconds  = Switch alarm off/on permanently Press and hold button for 10 seconds  = Link function: Switch batteries in parallel for 30 seconds via the separately available cut-off relay (jump start) -> Only possible in combination with the Cyrix-ct cut-off relay Alarm function: - Level 1 = as soon as 14.8 V is exceeded or 12.2 V is not reached: beeps every 10 seconds, screen lights up - Level 2 = as soon as 15.0 V is exceeded or 12.0 V falls below: beeps every 1/2 second, screen lights up -> as soon as the alarm goes off, you can mute it by lightly pressing the green button   Specifications:  Dimensions: 69.5 x 50.5 x 20 mm (surface-mounted version) ; 85.5 x 66.5 x 20 mm (built-in version) Weight: 130 g incl. cable  Low-voltage warning: DC voltage below 12.2 V  Over-charge warning: DC voltage above 14.8 V

Dual-Battery-Monitor BM2000, 12V or 24V stand-mount version The dual battery monitor is ideal for the continuous monitoring of 2 separate batteries (starter and consumer battery). Available for 12 V dual-battery systems or 24 V dual-battery systems as a surface-mounted version for off-road vehicles or motorhomes. Nakatanenga has the exclusive distribution rights for the dual battery monitor in Europe. The digital technology used in these monitors makes it possible to accurately reproduce the non-linear characteristics of lead-acid batteries. Using the green button in the centre, you can switch the information output on the display from one battery to the next. The dual battery monitor emits an audible alarm/tone as soon as the battery is either overcharged (14.8 V and above) or over-discharged (12.2 V and below).  The dual battery monitor has been specially developed to be combined with the Cyrix-ct intelligent automatic cut-off relay. Link function: If you press and hold the green button on the dual battery monitor for 10 seconds, both batteries are forcibly connected in parallel for a few minutes, which is particularly useful when operating a winch or when the starter battery is too weak (only possible in combination with the Cyrix-ct cut-off relay). Features:  Warning in case of overcharging or excessive discharge  reverse polarity protection   Audible alarm (can be muted)  Energy-saving functions (automatic dimming of the screen depending on the ambient light, automatic sleep function = auto-sleep 10-30 minutes after the battery stops running) 3 m long cable  Operating elements summarised:Single button press (green button) = Change information output (from battery 1 to battery 2)  = Mute active alarm.Press and hold button for 3 seconds = Switch alarm off/on permanentlyPress and hold button for 10 seconds = Link function: Switch batteries in parallel for 30 seconds via the separately available cut-off relay (jump start) -> Only possible in combination with the Cyrix-ct cut-off relay Alarm function: - Level 1 = as soon as 14.8 V (29.6 V) is exceeded or 12.2 V (24.4 V) is fallen below: beeps every 10 seconds, screen lights up - Level 2 = as soon as 15.0 V (30.0 V) is exceeded or 12.0 V (24.0 V) falls below: beeps every 1/2 second, screen lights up -> as soon as the alarm goes off, you can mute it by lightly pressing the green button Specifications:  Dimensions: 69.5 x 50.5 x 20 mm (surface-mounted version) ; 85.5 x 66.5 x 20 mm (built-in version) Weight: 130 g incl. cable  Low-voltage warning: DC voltage below 12.2 V (24.4 V) Over-charge warning: DC voltage above 14.8 V (29.6 V)  

Cyrix-ct relay - Smart charging system for two batteries in off-road or camper operation Electronically operated relay for simultaneous charging of two batteries (e.g. starting- and board-battery). The relay is installed between the two batteries, it stays disconnected until one of the batteries reaches a predetermined voltage level. Now the relay connects the two and both are fully charged. This method ensures that even when only using the vehicles for short distances, the starter battery is always ready to go. Additionally, the Cyrix-ct software monitors the tendencies of the voltage levels and then optimizes the delay accordingly.   12/24 V Automatic: The Cyrix-ct relay automatically recognizes the voltage and adjusts the output. Heat protection: The Cyrix disconnects when he recognizes temperatures exceeding the optimal operating temperature and shuts off accordingly, the relay connects automatically once the temperature has fallen again.   Once you turn off your motor and the alternator no longer charges the batteries, they are automatically disconnected to spare the starter battery for when you want to get going again. As soon as the voltage falls, the relay allows for a short delay in the disconnect to keep the batteries from overloading. The Cyrix-ct operates based on past charging patterns and only deviates from these when changes to this pattern appear within a certain interval. The duration of the delay depends on the pattern of deviation in voltage.   Technical Details:  Operating voltage (automatically): 12 V / 24 V Peak Power: 300 A Constant Power: 120 A  Tightening voltage: from 13 V to 13,8 V and 26 V to 27,6 V with intelligent disconnect Abfallspannung: Von 11 V bis 12,8 V and 22 bis 25,7 V with intelligent disconnect Power consumption when disconnected: <4 mA Power consumption when connected: 12 V: 220 mA ; 24 V: 120 mA Wire bolts: M6 Measurements: 46 x 46 x 80 mm Protection: IP54 Weight: 150 g   Connecting (V) DELAY   Disconnecting (V) DELAY V < 13 V Stays open   V < 11 V 0 s 13,0 V < V < 13,2 V 10 min   11,0 V < V < 12,0 V 1 s 13,2 V < V < 13,4 V 5 min   12,0 V < V < 12,2 V 10 s 13,4 V < V < 13,6 V 1 min   12,2 V < V < 12,4 V 30 s 13,6 V < V < 13,8 V 4 s   12,4 V < V < 12,8 V 3 min       >  12,8 V Stays connected       >  16 V Overload prevention