Das könnte Sie auch interessieren
Nakatanenga adapter for hitch-mounted racks for bikes and other sports gear Hitch-mounted racks for bikes and other sports gear are fantastic, if you are using your bikes only off and on or once a year on your annual holiday trip. No cumbersome attachment to the roof rails or the trunk needed: simply lock it onto your car’s standard ball hitch when you need to and hey presto off you go. Theoretically, that is, because for most 4x4 owners, the rear-mounted spare wheel will usually be in the way of a regular hitch-mounted bike rack. But that’s where Nakatanenga comes in.Our premium quick-release adapter extends your existing ball hitch by 25 cm, enough to reach beyond most spare wheels. The adapter locks onto the ball hitch quickly, securely and can also be padlocked. We advise to take careful measurements before ordering, so that you can be sure the 25 cm extension is sufficient for your individual set-up. Please also verify that you have enough space for the quick-release locking handle on the right side of the hitch. Your existing trailer hitch has to clear any obstructions like bumper indentations or the like for the handle to be operational. Don’t hesitate to get in touch if you need more information.With a maximum load of 120 kg, the hitch-mounted adapter is ideal for standard bike racks, cargo carriers, tubs, baskets etc. Since we sometimes receive enquiries regarding the validity of the maximum load, we would like to emphasize – as the manufacturer – that the specified load applies to the entire adapter and has been thoroughly tested and evaluated for stability and road safety. Separately available single components may differ in their capacity, this however does not affect the maximum load of the adapter as a unit. Please check the individual road safety regulations and legal requirements for your country when mounting the adapter.CAUTION!For technical and legal reasons, the use of the adapter with a trailer is PROHIBITED.
Prices incl. VAT;
Compact rechargeable tyre pump The OSRAM TYREinflate 2000 is a rechargeable tyre pump with a digital backlit display for easy and accurate pressure measurement and inflation of tyres, showing pressure values in BAR, kPA and PSI. The OSRAM TYREinflate 2000 has an internal memory and, thanks to the memory function, up to four different values can be programmed and stored for different tyres. It is also equipped with an auto-stop function: the OSRAM TYREinflate 2000 stops automatically when the preset pressure is reached. Thanks to the USB cable supplied, the OSRAM TYREinflate 2000 is rechargeable and no 12V socket is required for the power supply, so it is not only used for inflating car tyres, but can also be used for inflating bicycle, scooter and motorbike tyres. Thanks to its lightweight and compact design, the OSRAM TYREinflate 2000 is ideal for travelling and can be taken almost anywhere. Simply stow it in the glove compartment of your car, a bag or a rucksack using the storage bag supplied. A bracket for mounting and storage on a bike is also included. Thanks to the power bank function, the OSRAM TYREinflate 2000 can also be used as a charger for electronic devices such as your mobile phone. In addition, the integrated torch function can provide illumination at night or in poor lighting conditions. The scope of delivery also includes a 2-piece adapter set that can be used as a connection for bicycles, balls and other inflatable objects with Presta valves. OSRAM grants a 2-year guarantee* on this product Product information Charging time: approx. 3 hours Inflation time: <2min 0-5.5bar bicycle tyre Tube length: 14.5cm Units of measurement: PSI, kPa, bar Maximum pressure: 120 PSI, 8.3 bar Accuracy (bar): 0-1.5 PSI / 0.10bar Mains cable length: N/A Display size: 30x155mm Flow rate (1/min): N/A Electrical data Power supply: USB Cable Nominal voltage 3.7 V Nominal power 67.00 W Rechargeable battery (5200 mAh) Dimensions & Weight Length 70.0 mm Height 170 mm Width 70.0 mm Product weight: 500g Additional product data Display type Digital Noise level (dB) 83 dB Fuse 18 A Recommended area of application Bicycles, motorbikes, cars Accessories:Adapter for bicycles & small inflatable sports equipment. USB charging cable, power bank system, LED light, storage bag, bike holder Please note the legal information on batteries HERE. For certain types of batteries, we are legally obliged to charge a deposit.
Prices incl. VAT;
Ähnliche Artikel
Hitch-mounted racks for bikes and other sports gear are fantastic, if you are using your bikes only off and on or once a year on your annual holiday trip. No cumbersome attachment to the roof rails or the trunk needed: simply lock it onto your car’s standard ball hitch when you need to and hey presto, off you go. Theoretically, that is, because for most 4x4 owners, the rear-mounted spare wheel will usually be in the way of a regular hitch-mounted bike rack. But that’s where Nakatanenga comes in.As an alternative to our lever operated quick-release adapter, we also provide an adapter that can be screwed onto the existing ball hitch. The extension you gain is the same as with the other adapter: 25 cm to the back. It will take a little bit longer to attach or detach the screw-on version, of course, but it has the big advantage that there’s no lever in the way if you have little space around your trailer hitch. You also don’t have to secure it with a padlock since there’s hardly any worry about theft en route. So, if the quick-release adaptor is not for you because you want to mount a smaller or permanent adapter, this screw-on solution is the one for you. With a maximum load of 120 kg, the hitch-mounted adapter is ideal for standard bike racks, cargo carriers, tubs, baskets etc. Please check the individual road safety regulations and legal requirements for your country when mounting the adapter. CAUTION!For technical and legal reasons, the use of the adapter with a trailer is PROHIBITED. The adapter shifts the ball hitch 25 cm backwards Please note: You need a 24 mm wrench / socket to fasten it (not included!)Check regularly !!Note the drawbar load !!
Prices incl. VAT;
Ball head for trailer coupling Article is supplied without fastening material! Technical data: Drawbar load 350 kgD17.2 KNapproved by E11 marking
Prices incl. VAT;
More options for your Dixon-Bate: Standard additional slides Ships without safety pin. Safety pin available here.
Prices incl. VAT;
Replacement locking pin for Dixon-Bate towbars As a replacement in the event of loss or similar. The locking pin is an indispensable replacement or additional part for all standard Dixon-Bate trailer coupling systems. It ensures reliable and secure locking of the coupling slide and thus guarantees a firm hold when using the trailer - even under high loads. Delivery incl. safety split pin
Prices incl. VAT;
Dixon Bate adapter for Bikeracks and Game Tubs
Transport bikes safely with Dixon-Bate: the right adapter
Whoever has tried to attach a bike rack to the hitch of their Defender knows this problem: the spare tire is in the way! This is where this adapter comes in. It attaches to the usual Dixon-Bate rail and thus moves the mounting spot about 30 cm further back, clearing most spare tires.
Contents of shipment:
- Adapter for Dixon-Bate (30 cm)
- 1x Ball head for mounting the rack or tub
- 1x safety pin for the hitch
- hardware
Two safety pins are required for the correct instalment of this adapter, one comes with the hitch itself and the other with this adapter. Should your Hitch not have shipped with such a pin, you can order one here. The Adapter can for technical reasons NOT be used for regular towing! It can only be used for bike racks, game tubs and similar carrying systems.