Parking heater
Adapter for hot air ducts
End piece for warm air hose WALUFLEX Our 60 mm Flexi pipes for parking heaters are the perfect solution for transporting warmth and cosiness from A to B, whereby B can be one of our roof tents, a cold mountain hut or whatever else needs to be heated off-grid. The warm air pipes can be cut to any length and to ensure that the pipe ends are cleanly sealed or can be easily and airtightly extended, we have a silicone adapter for easy ratcheting. The adapter is the icing on the cake for our hot air ducts. It might work without, but it's definitely better with. For one thing, it is safer for people, equipment or cars because the edges, fringes and wire ends of the cut pipe disappear under the silicone cover and therefore have no chance of scratching, pricking or tearing. It is also very practical: one end of the silicone adapter is semi-permanently attached to the cut-off pipe with one of the cable ties supplied. The other end of the adapter can then be tightened to a connection or extension as required using the ratchet clamp (ideal for our parking heaters). Without the ratchet, the silicone adapter, which only makes the pipe 5 mm thicker, is a perfect and aesthetically pleasing end sleeve. After all, the eye camps with you and who wants to look at fraying pipe ends.
Prices incl. VAT;
Exhaust silencer for AUTOTERM (=Planar), Binar, Eberspächer parking heaters
Exhaust silencer for AUTOTERM (=Planar), Binar, Eberspächer parking heaters This stainless steel exhaust silencer is suitable for all parking heaters (air heating and water heating) with a 24 mm exhaust pipe.Suitable for the following heaters: AUTOTERM Air 2D and AUTOTERM Air 4D (formerly Planar 2D, Planar 44D), AUTOTERM Flow 5D (formerly Binar 5D). Eberspächer AirtronicAs the Webasto heaters have a 22 mm exhaust pipe, this silencer does not fit.Dimensions: Outer diameter connection: 24 mm Total length: 18 cm Length of silencer without connections: 14 cm Diameter: 40 mm (additional 2 cm fastening device)
Prices incl. VAT;
PU-5 simple control panel for PLANAR parking heaters
Simple control panel (PU-5) for Planar parking heaters The control panel offers easy operation of the Planar parking heaters. The heater can be switched on or off manually via the control elements. Furthermore, the heat output can be regulated via the control panel.Control elements: Planar-5M 1. switch ventilation off/on2. switch heating on/off3. LED light to indicate the status of the heater - yellow light = heater running - slow, red flashing = malfunction4. LED light for status display of ventilation - Green light = ventilation running - green flashing = ventilation off - yellow light = heating and ventilation are on together5. rotary control
Prices incl. VAT;
Nakatanenga Universal Heating Sleeve Fuel Filter, 12V or 24V, 100W
Heating sleeve for fuel filter, universally applicable Powerful 100 W heating sleeve for fuel filters with a diameter between 73-95 mm. For universal fitting - if controls already exist.The sleeve prevents the gelling of fuel in colder temperatures and can be fitted to any vehicle with 12 V. Compared to customary sleeves this silicone heating sleeve is very flexible and can be fitted to many diesel filters. The sleeve guarantees ideal heating as it sits closely to the filter. Comes with powerful Velcro strips for fitting. Suitable for filter elements with a diameter from 73 to 95 mm. In cold climates your diesel fuel is prone to gelling as paraffin crystals form which turn the fuel flaky. As a result the fuel stops running through the filter and your engine loses power until it finally stops. Once the filter is blocked, it can only be freed by inducing heat. By emitting this heat and transferring it to the filter, our heating sleeve prevents the clogging of the filter element. The paraffin crystals are immediately dissolved by the induction of heat and the fuel can easily pass the filter again. A ready to fit version with crimped plugs and wiring harness (incl. time relay and push-button) can be purchased here in our online shop. Technical details:Maximal heat resistance of insulation: 300 °CMaximal operating temperature: 250 °CVoltage: 12 V or 24 VOutput: 100 W Comes with: - silicone heating sleeve- 2 strong velcro straps
Prices incl. VAT;
Heating bracket for auxiliary heating (Planar 2D, Planar 44D and others)
Durable 90° Stainless Steel Heater Bracket for Parking Heaters This high-quality stainless steel heater holder with 90 ° angle fits the following auxiliary heaters: Planar 2D parking heater Planar 4D parking heater Planar 44D auxiliary heating only with the same flange pattern: Webasto & Eberspächer
Prices incl. VAT;
Connection cable for Planar control unit, 7 meters
Autoterm Connection Cable for Control Panel – 7 m With the 7 m connection cable for Autoterm control panels, you can position your auxiliary heater’s control panel much more flexibly within the vehicle. Especially in larger vehicles, camper conversions, cabins, motorhomes, or off-road conversions, the standard cable often does not reach the desired installation location inside the vehicle. The cable is used in place of the original connection cable and connects the control panel directly to the Autoterm auxiliary heater. This allows the control panel to be conveniently mounted where it is truly accessible for everyday use—for example, in the living area, near the kitchenette, in the sleeping area, or on a central control console. The connection cable is suitable for Autoterm Air 2D, Autoterm Air 4D, and earlier 44D heaters. Important: This is not an extension cable, but a replacement connection cable with a length of 7 m. Advantages 7 m cable length for flexible positioning of the control panel Ideal for campers, recreational vehicles, motorhomes, and off-road conversions Replaces the original control panel cable Compatible with Autoterm Air 2D, Air 4D, and older 44D models Neat solution for greater distances between the heater and the control panel Technical Specifications Cable length: 7 m Application: Connection cable for Autoterm control panels Compatible with: Autoterm Air 2D, Autoterm Air 4D, older 44D models Type: Replacement cable, not an extension cable Scope of Delivery 1x Autoterm control panel connection cable, 7 m
Prices incl. VAT;
Conversion Kit für independent mobile heating system
Conversion kit for independent mobile heating system A independent mobile heating system is something great. In everyday use, this is repeatedly exposed to splashing water, rain, snow, etc. To benefit from the heating system for a long time, we have decided to put together a conversion kit. With this conversion kit you make your mobile parking heater waterproof. Consisting of:2 x threaded caps2 x rubber stoppers2 x O-rings2 x side wall duct 24 mm2 x air duct 60 mm
Prices incl. VAT;
Module for 12 Volt AUTOTERM parking heaters
Module for 12 Volt AUTOTERM parking heaters With this module and a suitable radio remote control, you can control AUTOTERM (Planar 2D12 and Planar 44D12) parking heaters. You need the module to assign the parking heater to a channel of a radio remote control. You can thus switch the parking heater on and off by remote control. A connection diagram is included in the scope of delivery.
Prices incl. VAT;
Additional tank 7.5 litres for parking heaters
Additional tank 7.5 litres for parking heaters This additional tank can be placed anywhere on the vehicle.The tank can be filled with 7.5 litres of fuel, e.g. for the AUTOTERM Planar 2D parking heater. Suitable fastening material is included in the scope of delivery.
Prices incl. VAT;
Spare parts kit for parking heater
Spare parts kit for mobile parking heaters. To ensure that your parking heater remains watertight, you will receive the common wear parts here. Set consists of: 3x rubber plugs 2x O-rings 2x thread caps 1x storage bag
Prices incl. VAT;
Reparatur-Set Autoterm Air 2D
Autoterm Air 2D repair kit The set consists of the following components: Glow plug screen Gasket for the glow plug Gasket for the combustion chamber Seal for the fan motor Seal for the fuel line Caution: Opening the appliance yourself within the warranty period will invalidate the warranty. Repairs should therefore be carried out by specialised companies.
Prices incl. VAT;
Temperature sensor / probe for AUTOTERM (=Planar) parking heaters
The temperature sensor / probe enables a more accurate measurement of the temperature. This temperature sensor can be mounted as a third sensor (in addition to the two temperature sensors built into the heating and control panel); for example, in the living or sleeping area. The cable is 5 m long and protected by a corrugated tube. Suitable for AUTOTERM Luft 2D / 4D (formerly Planar 2D, 4D and 44D) parking heaters. Note: 1 temperature sensor can be connected per heater.
Prices incl. VAT;
tank-mounted fuel intake pipe
Tank-mounted fuel intake pipe The 60 cm tank-mounted fuel intake pipe is perfect for our diesel heaters by Autoterm, but will also suit most other products like Webasto or Eberspächer. It will work with both diesel and gasoline on either air or water heated systems and it doesn’t matter whether your tank is plastic or metal. To fit the intake pipe, it is generally necessary to remove the fuel tank and its fittings. After drilling a hole for the intake pipe, the connector head has to be countered with a nut from the inside. That’s why access to the tank’s interior through the intake opening is a must. The flexible riser pipe can be bent into any shape, making it easy to determine the extraction level for the heater. Make sure that the opening of the pipe doesn’t reach all the way to the bottom of the tank, otherwise you’ll risk complete emptying of your fuel tank and the unwanted intake of dirt particles or tank sludge. The tank extraction is ideally suited for our Planar parking heaters.
Prices incl. VAT;
Side wall duct Auxiliary heater intake / exhaust 24mm
Stainless steel side panel feed-through for auxiliary heating - intake/exhaust 24 mm A dimensioned drawing can be found in the data sheet tab. Length of the tube: 25 mm Suitable for AUTOTERM (=Planar) 2D Consisting of: Disc with VA pipe The side wall bushing is now supplied in a new, more compact version. This provides better installation options where space is limited. Please note: When installing the parking heater, you must take the general wading depth of the vehicle into account. Depending on the position of the parking heater intake, the wading depth may vary for the individual vehicle. Please also observe the instructions of the parking heater manufacturer!
Prices incl. VAT;
Heater Piping, flexible, Ø60mm for AUTOTERM (=Planar) 2D vehicle heater
Warm Air Where You Need It: The Highly Flexible 60mm Warm Air Ducting! Are you currently installing your parking heater or optimizing your existing system? Rigid, unwieldy hoses make your life difficult when it comes to directing warm air exactly where it's needed – whether in your camper, off-road vehicle, rooftop tent, or boat. With our highly flexible warm air ducting (inner diameter 60mm), installation becomes child's play! Its enormous flexibility allows you to master even complicated routing and tight radii without any problems. This makes our warm air ducting the first choice: Maximum Flexibility: Can be laid in the tightest installation spaces and around sharp corners without kinking or blocking airflow. This saves time and nerves during installation. Optimal Airflow: Despite its flexibility, the hose ensures good flow for efficient distribution of warm air from your parking heater. Robust Quality: Developed for the demands of a vehicle environment and resistant to the typical temperatures of a parking heater. Universally Suitable: With an inner diameter of 60mm, it is compatible with the connections of many common parking heater models – ideal for the AUTOTERM 2D parking heater, but also for Webasto, Eberspächer, and Truma heaters. As this hot air ducting is particularly flexible, we recommend it for use with our mobile air heater. Sold by the Meter for Your Needs: You order exactly the length you need for your project. This way, you avoid unnecessary waste and save costs. The hose is delivered as one continuous piece in the ordered length. Whether you want to direct the warmth specifically to the footwell, sleeping areas, or a particular area of your vehicle – this hose makes it easy. Notes: Inner diameter: Ø 60 mm Price per linear meter, sold only in whole meters. The pipe is completely waterproof. Example: If you need 3 meters of hot air ducting, add this item to your shopping cart 3 times. Please note: A maximum of 10 meters can be delivered in one piece. If you order, for example, 20 meters, you will receive 2x10 meters. Individual pipe sections can be connected without problems using the pipe connector. You can find a suitable storage bag for the hose here. Put an end to rigid solutions! Order your highly flexible warm air ducting now and enjoy cozy warmth exactly where you want it!
Prices incl. VAT;
Webasto Air Vent, rotable, 60mm fitting
Rotatable for individual airflow adjustment Rotating air vent, 60 mm, suitable for a variety of auxiliary vehicle heaters like e.g. Webasto, Eberspächer and Planar.This Webasto air vent also fits our auxiliary heater console.
Prices incl. VAT;
Intake air filter for AUTOTERM Air 2D, 4D and Flow 5D
Intake filter set for your Autoterm parking heater Robust. Reliable. Off-road ready. This compact intake filter set consists of a short air intake pipe with integrated filter element and a sturdy bracket for secure installation. It reliably protects your Autoterm parking heater from coarse dirt, dust and insects - ideal for dusty tracks, muddy pistes and wild outdoor adventures. Whether in the desert, forest or workshop - with this filter, your parking heater can breathe freely.
Prices incl. VAT;
T-piece 60mm for Planar 2D Auxiliary Vehicle Heater
Efficient airflow distribution T-piece suitable for warm air ducts of Planar 2D auxiliary heaters and other independent vehicle heaters with 60 mm hoses.
Prices incl. VAT;
Wear kit with exhaust pipe for AUTOTERM Air 2D / 4D
Wear kit with exhaust pipe for AUTOTERM Air 2D / 4D For our portable heater boxes, we only use AUTOTERM (previously Planar) Diesel heaters. Since we always have a surplus of original AUTOTERM accessories left over after assembling the units, we’re offering these essential parts as wear kits at an unbeatable special price. This represents a whopping discount of nearly 70% compared to the retail value of the individual parts.The sets will fit AUTOTERM 2D and 4D air heaters and consist of one fuel line, one exhaust pipe including heat insultation and various pieces of fastening materials. These are essential spare parts and replacements to keep handy in case of damage or wear and tear.
Prices incl. VAT;
Warm air pipe 75mm for AUTOTERM air 4D (=Planar 44D) parking heater
Warm air pipe 75mm for AUTOTERM Air 4D (=Planar 44D) parking heater Warm air pipe / flexible pipe / air pipe / warm air hose for effective distribution of warm air. The warm air pipe is optimised for the parking heater AUTOTERM Luft 4D (formerly Planar 44D). However, it is also suitable for Webasto, Eberspächer and Truma heaters.The warm air pipe is supplied according to current stock, so you could get one in black or in brown. Colours: inside silver and outside either black or brownInner diameter: Ø 75 mmPrice per running metre, delivery in whole metres only.
Prices incl. VAT;
Vent 60m for Planar 2D independent vehicle heater, closable
Air vents for individual warm air regulation This vent can be used for all independent vehicle heaters with 60 mm piping, like the Planar 2D auxiliary heater. The vent can not be fitted to our auxiliary heater center console, in which case please use our Webasto vent.
Prices incl. VAT;
T-piece 75mm for Planar 44D Auxiliary Vehicle Heater
Manifold T-piece for 75 mm hot air pipes - ideal for AUTOTERM & similar systems T-piece suitable for warm air ducts of Planar 2D auxiliary heaters and other independent vehicle heaters with 75 mm hoses.
Prices incl. VAT;
Heater Piping, flexible, Ø60 mm for Planar 2D vehicle heater
Heater piping / flexible piping / air pipe for efficient distribution of heater air. The piping is specially tailored to suit the Planar 2D auxiliary vehicle heater, but also fits Webasto, Eberspächer and Truma heaters. Supplied according to stock, i.e. you can reveive either black or brown. colour: silver inner with either black or brown outerdiameter: Ø 60 mmprice per metre, only sold in full metre lenths
Prices incl. VAT;
Webasto pipe connector / double socket, with 60mm connection
Webasto pipe connector / double socket, with 60 mm connection Warm air pipe connector for effective distribution of warm air. The warm air pipe connector can be used to connect two warm air pipes with each other. Diameter: Ø 60 mmPrice per piece
Prices incl. VAT;
Adapter / reduction 90-60 and 75-60 warm air pipe for parking heaters
Adapter / Reducer 90-60 and 75-60 Warm Air Pipe for Parking Heaters With this adapter or reducer you can reduce the warm air duct of a parking heater from a 90 mm warm air pipe to a 60 mm warm air pipe.The 75-60 adapter is intended, for example, to connect a 75mm warm air pipe with a 60mm connection piece.
Prices incl. VAT;
Y-piece for 60 mm hot air duct, symmetrical
The ideal connector for evenly distributing warm air in a 60 mm system across two strands e.g. in a camper van, van or expedition vehicle If you want to distribute the warm air from your parking heater evenly between two outlets, this Y-piece (60 × 60 × 60 mm) is the perfect solution. Its symmetrical design allows the air flow to be distributed evenly between two pipes – perfect for well-designed warm air distribution in 60 mm pipe systems. Your advantages Symmetrical distribution for even warm air distribution Suitable for 60 mm warm air pipes/hoses Ideal for parking heater warm air systems (e.g. Autoterm/Planar and other 60 mm systems) Compact and lightweight – easy to install and lay the pipes Technical data Design: Y-piece, symmetrical Connection size: 60 / 60 / 60 mm Manufacturer: Autoterm Tip: For a permanently secure connection, the warm air pipes should be pushed on cleanly and secured with suitable clamps if necessary.
Prices incl. VAT;
Quick-connect coupling for hot air connection
Magnetic Warm Air Connectors and Adapters – flexible, quick, and clean connection With our magnetic adapters for warm air hoses, connecting heating boxes, parking heaters, or other warm air systems is especially easy, quick, and convenient. The components are designed for a practical and clean connection and make coupling and uncoupling much easier – ideal wherever warm air needs to be routed flexibly or disconnected quickly when required. The system consists of the magnetic mounting flange 60 mm and the matching magnetic warm air connector 60 mm, or alternatively the magnetic warm air connector 60 mm, freely rotatable. Important: The mounting flange is the fixed receiving part and always requires a matching connector as its counterpart. Only this combination creates the complete magnetic connection. For additional flexibility, an adapter ring from 60 mm to 75 mm is available, allowing different hose diameters to be connected easily. The magnetic sealing cap fits exclusively on the mounting flange. It is used to close the mounting flange securely and cleanly when not in use. It is not intended for use on the magnetic connector or the freely rotatable connector. The magnetic connection allows quick installation and convenient handling in daily use. This makes the adapters ideal for mobile heating systems, camping conversions, workshop applications, or custom warm air routing in vehicles. Variants at a glance:• Magnetic mounting flange 60 mm• Magnetic warm air connector 60 mm• Magnetic warm air connector 60 mm, freely rotatable• Magnetic sealing cap for mounting flange• Adapter ring for warm air connector 60 mm to 75 mm Important notes:The mounting flange always requires a matching counterpart: magnetic warm air connector 60 mm or magnetic warm air connector 60 mm, freely rotatableThe sealing cap fits only on the mounting flange Advantages:• quick and easy connection of warm air systems• ideal for heating boxes, parking heaters, and custom solutions• convenient coupling and uncoupling thanks to the magnetic connection• clean and practical solution for mobile and fixed installations• flexibly expandable with matching connector and adapter solutions The components are professionally 3D-printed and impress with their high-quality, practical design. Made from nylon 12 reinforced with carbon fiber, they offer high dimensional stability, are heat-resistant and UV-resistant, and are therefore ideal for reliable use in demanding environments. This results in a durable and functional solution for hot-air systems in vehicles, campers, or custom installations. Dimensionally stable even at operating temperatures up to 150 degrees Celsius.
Prices incl. VAT;
Y-piece 60-60-60 mm, asymmetrical warm air distributor
Y-Piece 60-60-60 mm Asymmetrical Warm Air Distributor This asymmetrical Y-piece expands your 60 mm warm air ducting system and splits the airflow into two outlets – ideal for efficiently heating multiple areas in a camper, van or motorhome. Thanks to the 45° branch, warm air can be directed precisely where it is needed, while the main duct continues to be reliably supplied. Key benefits at a glance: Asymmetrical airflow distribution for targeted heat management – not a 50:50 split, but approx. 2/3 : 1/3, perfect when one area requires more heat than another Compatible with all common 60 mm warm air hoses used with heaters such as Autoterm, Eberspächer and similar systems Robust and practical solution for extending your auxiliary heater’s warm air distribution Ideal for customizing heat distribution in your vehicle and supplying multiple warm air outlets.
Prices incl. VAT;
Installation accessories for auxiliary heating boilers
Installation accessories for parking heater boilers We recommend the following accessories for connecting the boiler and the heater: Pressure reducer adjustable 1-5.5 bar with pressure gauge and 2x hose nozzle 10mm Protect the sensitive components (boiler, drinking water filter, but also e.g. simple plastic pipe connections) of your pressurized water system. With a maximum inlet pressure of 16 bar, this pressure regulator with pressure gauge can also cope with the most powerful pressurized water pumps in touring vehicles and boats. Its outlet pressure is infinitely adjustable between 1 and 5.5 bar.Specifications: Max. Operating pressure, inlet side: 16 bar Pressure setting range, outlet side: 1 - 5.5 bar Factory setting: 3 bar Max. Max. operating temperature: 80 °C Pressure gauge scale: 0 - 10 bar Operating medium: Water Connections 1/2" and 1" female thread (ISO 228-1) Length incl. hose nozzles: 139 mm Scope of delivery: Adjustable pressure reducer 2 x hose nozzle 10 mm Pressure gauge Water pressure system - pressurized water pump & pressurized storage tank 12V in a set The heavy duty water pressure pump with bypass system, 4 bar pressure and 18 liters flow rate per minute and the 1 liter accumulator tank are the ideal combination for your pressurized water system.Together they enable smooth operation with sufficient water pressure - even when filtering.Reduced pump cycles also lead to a long service life. Its ease of repair also makes the pump a sustainable choice.Scope of delivery: Accumulator tank Pressurized water pump Pre-filter 4x 10 mm 1/2" NPT connection nozzles Adapter Webasto hot air duct 60mm to 90mm Attention: 90mm inner diameter. A 90mm warm air pipe will not fit. In this case, a 90mm pipe connector (ArtNo. 18067) must be used. This adapter suitable for rather rare applications such as adapting 60mm hot air pipe to e.g. boilers with 90mm connection. Please note that you should never reduce the throughput of the hot air pipework of an air heater (i.e. do not reduce from 90mm to 60mm). Note: further installation accessories for parking heater boilers can be found HERE in the store.
Prices incl. VAT;
Vibration damper for parking heaters
Vibration damper for parking heaters Vibration damper for additional decoupling of the feed pump of a parking heater. Ideally suited for our AUTOTERM 2D and 4D (formerly Planar 2D and Planar 44D) parking heaters.Technical data:Diameter: 25 mmHeight: 20 mmThreaded bolt: M6x18
Prices incl. VAT;
Connector ring for Autoterm warm air system
Connector ring for Autoterm hot air systems – 60 mm A clean solution instead of improvisation: this connector ring connects the heating outlet directly and precisely to distribution elements such as Y- or T-pieces. There is no need for additional hot air pipes or hose clamps. Technical data: Diameter: 60 mm Colour: Black Advantages at a glance Easy installation: Direct connection of air duct and distribution elements Tight & efficient: Reduces heat loss through airtight connection Time-saving: Ideal for new installations and retrofits Universally applicable: Suitable for all components with a diameter of 60 mm
Prices incl. VAT;
Mounting fuel pump for Autotherm air stand heaters 2D and 4D
Spare part -> Attachment fuel pump for Autoterm air parking heaters 2D and 4D AUTOTERM Air 2D AUTOTERM Air 4D Material: solid rubber (with metal sleeve for attachment)
Prices incl. VAT;
Auxiliary Heaters – Warmth and Comfort for Your Off-Road Adventures
With an auxiliary heater, you'll be perfectly equipped even in the coldest regions. Whether facing freezing nights in your vehicle, winter off-road trips, or frosty mornings – a high-quality auxiliary heater ensures pleasant temperatures and significantly enhances your comfort. Our off-road shop offers a wide selection of powerful auxiliary heaters specifically designed for off-road enthusiasts.
Why an Auxiliary Heater is Essential
For off-road adventurers travelling in cold climates, an auxiliary heater provides numerous benefits:
-
Comfortable Interior Temperature: Maintains a cosy cabin regardless of outside conditions
-
Defrosting and Clear Visibility: Prevents window fogging and icing for improved safety
-
Independent Heat Source: Operates without running the engine - perfect for stationary warmth
-
Energy Efficient: Modern systems optimize fuel consumption and battery usage
-
All-Condition Versatility: Ideal for winter camping, polar expeditions, or extended trail stops
Our Auxiliary Heater Selection
We carry heaters from leading manufacturers, specially developed for 4x4s, SUVs, and campers:
-
Diesel Heaters: Powerful and efficient solutions for diesel-powered vehicles
-
Air Heaters: Quickly warm cabin air while being energy efficient
-
Coolant Heaters: Integrated with your vehicle's cooling system to preheat both engine and interior
-
Complete Kits: Include all necessary components for straightforward installation
Key Features
-
Programmable Controls: Timers and remote activation for convenience
-
Durable Construction: Built to withstand extreme conditions
-
Easy Installation: Designed for straightforward integration
-
Compact Design: Space-saving solutions for all vehicle sizes
Selection & Maintenance Tips
-
Choose appropriate heating capacity for your vehicle size
-
Perform regular maintenance to ensure reliable operation
-
Verify compatibility with your vehicle type and fuel system
-
Utilize timer functions to optimize energy usage
Expert Advice
Our specialists will help you select and install the perfect heating solution for your needs.
Pro Tip: An auxiliary heater keeps you warm and independent no matter how low the temperatures drop.
Equip your off-road vehicle with a reliable auxiliary heater today and enjoy ultimate comfort on all your adventures!
