For the Doors

Nakatanenga window vent for lateral rear window of the Toyota Land Cruiser 76 and 79 Series from model year 1984 onwards The 76 Series is purist, robust and built for tough use. The 79 Series is a workhorse and at home in extreme conditions. Good air circulation as if the windows were slightly open, but without any increased risk of rain or theft? Plus reliable insect protection? That's what our ventilation panels with mosquito nets offer, specially manufactured for the 76/79 Series from solid aluminium — no rattling universal parts. Supplied in pairs and powder-coated in black, they are ideal for emergency vehicles and expeditions. Installation is straightforward: wind down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels in place. The ventilation panels are supplied in pairs. Dimensions: 442 x 126 mm Note: These ventilation plates were originally developed for the Jeep Wrangler. However, some of our customers use these ventilation plates for the Land Cruiser mentioned above. Due to the shape, there may be a small gap of 5-7 mm on the left or right between the plate and the window frame on the Land Cruiser. NOTE: Only suitable for 4-door models!  

Nakatanenga ventilation panels, rear side window – Citroën Berlingo K9 / Peugeot Rifter / Opel Combo / Toyota Proace City Verso, from model year 2018 The precisely fitting ventilation panels are ideal for high-roof combi vans such as the Citroën Berlingo, Peugeot Rifter, Opel Combo and Toyota Proace City Verso. These vehicles in particular are often used as family cars, campers or transport vehicles for dogs – and benefit greatly from good air circulation in the interior. The robust, aluminium-made and black powder-coated panels can be inserted into the lowered side windows in just a few simple steps. They reliably provide fresh air without allowing rain or insects to enter the vehicle, while also reducing the risk of unauthorised access. This keeps the interior pleasant even on warm days, whether you are on the move or stationary. Installation is straightforward: lower the window, insert the panel and raise the window again – done. ⚠️ Important note: Even with ventilation panels in place, children and animals must not be left unattended in the vehicle. Suitable for: Citroën Berlingo K9 (2018 and later), Peugeot Rifter, including L2 seven-seater, Opel Combo and Toyota Proace City Verso (all from model year 2018 onwards) Note: only suitable for vehicles with optional equipment package (sliding doors in row 2 with lowerable side windows) Material: aluminium, black powder-coated Dimensions: 571 x 147 mm    

Air Vents for Range Rover Sport BJ 2006-2010 The Range Rover Sport combines sporty looks with luxurious comfort. Good air circulation as if the windows were slightly open, but without the increased risk of rain or theft? Plus insect protection? Our ventilation panels with mosquito nets, suitable for the Range Rover Sport and made of high-quality aluminum, deliver just that—no rattling universal parts. Supplied in pairs and powder-coated in black, they offer discreet functionality without detracting from the interior. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels installed. Length: 505 mm    

Fresh Air for Your Defender 110/130 up to model year 2016 – Secure and Insect-Free! Fresh air for your Defender 110/130 – safe and insect-free! The Defender 110 is synonymous with rugged off-road culture. Good air circulation, as if the windows were slightly open, but without any increased risk of rain or theft? Plus insect protection? Our ventilation panels with mosquito netting, made of sturdy aluminum and tailored to fit the Defender 110/130, achieve just that — no rattling universal parts. Supplied in pairs, powder-coated in black, they offer discreet protection and comfort on expeditions or when used as an everyday vehicle. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels installed. Length: 505 mm    

Nakatanenga ventilation panels side window - Jeep Cherokee XJ (1984-2001), Nissan Navara D40 2004 bis 2015 Suitable for: Jeep Cherokee XJ (1984-2001) Nissan Navara Double Cab D40 (2004-2015) The Jeep Cherokee XJ and Nissan Navara are classics for off-road enthusiasts and individualists. Good air circulation, as if the windows were slightly open, but without the increased risk of rain or theft? Plus protection from insects? Our ventilation panels with mosquito nets, made of durable aluminum and tailored to fit the Cherokee XJ, make this possible — no comparison to rattling universal solutions. Powder-coated in black and supplied in pairs, they blend discreetly into the classic look and increase comfort on tours and excursions.  Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels installed. Length: 410 mm    

Ventilation plates rear side window Toyota Hilux from model year 2016 The newer Toyota Hilux models are more modern and powerful, but remain just as robust. Good air circulation as if the windows were slightly open, but without the increased risk of rain or theft? Plus protection from insects? That's what our precisely fitting ventilation panels with mosquito nets offer, made from durable aluminium — no rattling universal parts. Supplied in pairs and powder-coated in black, they are ideal for work and leisure. Installation is straightforward: wind down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels installed. Length: 560 mm     

Ventilation plates for the rear side windows of the Jeep Wrangler Unlimited JK up to model year 2018 The Jeep Wrangler JK is built for adventure and off-road use. Good air circulation, like with slightly open windows, but without a larger opening for rain or theft? And protection from insects at the same time? That's what our ventilation panels with mosquito nets offer, made specifically for the Wrangler JK and made of aluminum—no rattling universal parts. Supplied in pairs and powder-coated in black, they are ideal for camping, beach days, and longer breaks outdoors.  Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels in place. Length: 475 mm                                                                                                                                                                                                                                          

Nakatanenga window vent for lateral rear window of the Jeep Wrangler Unlimited JL from 2018 and JLU Gladiator Nakatanenga ventilation panels for the rear side windows of the Jeep Wrangler Unlimited JL from 2018 onwards and JLU Gladiator The modern Jeep Wrangler JL combines off-road capability with contemporary comfort. Good air circulation, as with slightly open windows, but without the increased risk of rainwater or theft? Plus reliable insect protection? Our ventilation panels with mosquito netting, precisely tailored to the Wrangler JL and made of sturdy aluminum, deliver just that — no rickety universal accessories. Supplied in pairs and powder-coated in black, they provide greater comfort in hot weather and when camping. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with the ventilation panels in place. The ventilation panels are supplied in pairs. Dimensions: 442 x 126 mm NOTE: Only suitable for 4-door models!      

Upgrade rear door damper for Suzuki Jimny 2 GJ/HJ Rear doors on off-road vehicles have to be heavyweight athletes, as they often carry spare wheels and other equipment. Especially when the vehicle is parked on uneven surfaces, opening tailgates – or keeping them open – can be a difficult and heavy task.For the Suzuki Jimny 2 (from model year 2018), we offer an easy-to-fit plug & play solution that does not require any modifications to the vehicle itself. The replacement damper for the rear door is calibrated to an opening angle of approximately 3. That means once you’ve pulled the handle and opened the door to that angle, the damper automatically and gently pushes the door fully open and keeps it in position – even when you’re parked at an angle on slopes or in off-road terrain. Another advantage of the heavy duty damper is the wider opening angle (slightly over 90°) when compared to the original part.

Rear Tailgate Damper Upgrade for the Land Rover New Defender More comfort, more control, more practicality for everyday use: With the rear tailgate damper upgrade for the Land Rover New Defender, opening the tailgate becomes noticeably smoother and more reliable—whether in everyday use, on trips, or off-road.   Especially on the New Defender, the tailgate is correspondingly heavy due to the spare tire and additional attachments. This can make opening and holding it open cumbersome, particularly when the vehicle isn’t standing perfectly straight. This is exactly where our upgrade comes in: The specially tuned heavy-duty damper supports the tailgate shortly after unlocking and opens it gently and in a controlled manner on its own starting at approximately 3°.   Particularly practical: Even when the vehicle is at a slight angle—as often happens off-road, on uneven surfaces, or on inclines—the tailgate stays reliably open. This gives you convenient access to the cargo area at all times—without having to hold it open, brace it, or worry about it slamming shut.   Another plus is the increased opening angle of just over 90°. This provides more freedom of movement at the rear and makes loading and unloading significantly easier.   Further down, our comparison video clearly illustrates the differences between the original damper and the Nakatanenga upgrade damper.   Installation is a plug-and-play solution and requires no vehicle modifications. Simply swap it out, enjoy the benefits, and make your Defender even more practical for everyday use.   Your benefits at a glance: Noticeably greater comfort when opening the tailgate Automatic, smooth opening starting at approx. 3° Reliable hold-open function even on slight inclines Wider opening angle for better access to the cargo area Robust heavy-duty design Simple plug-and-play installation No modifications to the vehicle required

No More Slamming Rear Doors: The Nakatanenga Rear Door Damper 2.0 for Your Defender (from MY 2002)! Sound familiar? An unguarded moment, a gust of wind, or a slight incline, and the heavy rear door of your Land Rover Defender slams shut. This is not only annoying but can also be dangerous or damage the door in the long run. Specifically developed for all Defender models from 2002 onwards with a rear door, this conversion kit ensures a gentle, controlled opening and securely holds your rear door open. It replaces the standard door stay with a special gas strut featuring a soft-stop function, which reliably keeps the door open. The damper also works reliably when our spare wheel carrier for the rear crossmember is mounted. These are your advantages with the Rear Door Damper 2.0: Gentle Opening of the Rear Door: No more slamming shut! The damper gently catches the door and reliably holds it open. Keeps the Door Securely Open: Even on a slight incline or in wind, your rear door stays in the desired position – ideal for loading and unloading. Increased Safety: Prevents the door from slamming shut unintentionally and protects you and others from injuries. Easy on Material and Your Nerves: Less stress on door hinges and lock, and significantly more comfort in everyday use. High-Quality Materials: Manufactured for a long service life and reliable function, even under demanding conditions. Perfect Fit for Your Defender: Developed for all Land Rover Defenders from 2002 onwards (Td4 and later Td5 models with the newer rear door variant). Easy Installation: Installation is straightforward and can be done in just a few simple steps. The Nakatanenga Rear Door Damper 2.0 is a small component with a big impact that you won't want to miss in your daily use of your Defender. It makes your life easier, whether you're shopping, traveling, or in tough off-road use. Technical Description of the Damper: All mounting parts are made of stainless steel. The well-thought-out linkage geometry of the body-side mounting bracket prevents incorrect installation. The gas strut used is manufactured exclusively for us with this precise characteristic curve – a special seal for use in dusty environments and a soft-stop on extension complete the excellent impression. An updated installation manual is included. Say "goodbye" to the slamming rear door! Get the Nakatanenga Rear Door Damper 2.0 now and enjoy the comfort! Note: Convenient tailgate dampers for all Land Rover Defender 90/110 models up to model year 2001 can be found here in the shop.

Convenient rear door damper prevents the door from closing unintentionally Conversion kit for all Land Rover Defender 90 / 110 models up to MY2001 with rear door. Replaces the old adjuster with a specially designed soft-stop gas strut that slows the rate of travel as it reaches the end of its stroke. Keeps the door securely open, also with our rear crossmember spare wheel carrier. This is the improved version with the following added features: all fittings are stainless steel re-designed body tub bracket improved geometry - the gas strut can't be destroyed by accidental wrong fitting gast strut exclusively designed for us - changed characteristic curve, improved sealing for use in dusty conditions and soft-stop feature supplied with revised fitting instructions Note: Convenient tailgate dampers for all Land Rover Defender 90/110 models from model year 2002 onwards can be found here in the shop

X-Trouser Door Trap for Land Rover Defender Keeps your clothes from getting caught in the door catch of your Land Rover Defender 90/110/130, set of 2 pieces By its rounded design, the X-Trouses door catch prevents your clothes from getting caught in the sharp-edged original Defender door catch.

Door Handle Exchange set Defender until MY2002 In 2002, the Defender’s doors were re-designed to accommodate the first-ever introduction of electric power windows to the line-up. In the overhaul, the door-handles were updated, too. This complete door handle repair kit makes the replacement of broken or worn-out looking door handles in pre-2002 Defenders dead easy. The kit consists of two handles, all required fastening materials and seals, as well as three lock barrels including two keys each. The handles fit front and rear doors.

Wide angle stainless steel second row door stay brackets for Defender 110/130 CC Wide angle stainless steel second row door stay brackets for Defender 110 and 130 CC rear doors. Allow to open the door further (up to  95°). This does not only make entering and leaving the rear seats easier, also gives more access for drawers if rear bench is not fitted, e.g. for a cooler (we can make such drawers to order!). Also without any additional rear furniture loading is greatly facilitated. DIY fitting possible! Only takes a few minutes, the supplied fitting instrucions leave no questions open! No drilling of additional holes, bracket fits to original mountings. Set (for two doors) is supplied with stainless steel fixings, washers, anti-seize copper paste and fitting instructions. The kit fits all MY Defenders  (TDi, TD5, TD4).

Leather door loops Suitable for Land Rover Defender and other makes - put an end to ugly plastic handles that pinch your leg all the time! Leather straps, inner, with stainless end-covers, made of black or brown (cognac) saddle leather with white stitching, hand-made. Sold as pairs, with high-quality stainless steel screws. Please select the colour of your choice.

Nakatanenga leather door loops Suitable for Land Rover Defender and other vehicles - no more ugly plastic handles that also pinch into your leg! Interior leather straps, made from black or creme coloured saddle leather with classy white stitching. Hand-made, supplied in pairs, including high-quality stainless fixings. Please choose desired colour.

Stainless steel bed strip for the Land Rover Defender 90 and 110 The loading area bar is made of corrosion-resistant stainless steel and replaces the corrosion-prone original loading area bar. Since the original screw heads occasionally tear off, the hole pattern is slightly offset. So new holes have to be drilled. The delivery includes stainless steel screws.

TREKFINDER door protection - door handle shells for Suzuki Jimny II (GJ/HJ) The robust door handle moulding set from TREKFINDER reliably protects the sensitive areas around the door handles from scratches and damage - ideal for everyday and off-road use. Made from black plastic, suitable for the right and left side of the Suzuki Jimny II (model GJ from 10/2018 and model HJ).

Clips for fastening the rear door panelling - white These white clips are ideal for securely fastening the rear door trim, e.g. on the Land Rover Defender. They ensure a firm hold and a clean look - perfect for replacement or retrofitting.