Screws, fittings, brackets
Side Mirror for Land Rover Defender
Side mirror with arm for Land Rover Defender 90/110/130 Suitable for all model years, also Series III, if later hinges have been retrofitted. Fits driver and passenger side. Measures mirror: approx. 140x200 mmLength arm: approx. 140 mm
Prices incl. VAT;
Stainless steel bolt set for Land Rover Defender 110 SW / 110 CC / 130 CC
Stainless steel screw sets for Land Rover Defender NOW EXCLUSIVELY manufactured for us in ORIGINAL Land Rover shape.The screws have the identical heads as the original screws on the Defender!!!set comprises a total of over 440 parts. With this set, all externally visible screws on the vehicle can be replaced with high-quality, rust-free V2A stainless steel screws.Suitable for all model years - TDi, TD5, TD4 2.4, TD4 2.2The side door and rear door hinge screws, as well as the screws for the body mounting at the rear, are specially manufactured for us and correspond in shape to the original screws (Torx tool holder).The pack also contains hood bumper screws specially manufactured for us.The screw sets are clearly arranged in 10 bags for each part of the vehicle: Rear door hinges Rear body mounting Radiator grille Cargo bed strip + reflectors Hood hinges Rear cross member Spare wheel holder Headlight covers + mudguard covers Side door hinges Inner door sill + A-pillar + 2 bumper screws + anti-seize paste Simple installation is possible even for car amateurs.We also supply an anti-seize paste for the screws.Please note: This set does not include the stainless steel hinge bolts for the ventilation flaps (item no. LKSB) Note: The screws for the door hinges may have to be shortened. The sets for the various sections contain more screws to cover different attachments. This means that screws may be left over under certain circumstances.
Prices incl. VAT;
Stainless steel fixing set for Land Rover Defender 90 SW / 90 HT / 90 softtop
Stainless steel screw set for Land Rover Defender 90 SW / 90 HT / 90 Softtop Produced with ORIGINAL Land Rover heads EXCLUSIVELY for us. The screws' heads are identical to the original Defender screws!!! Fits all model years - TDi, TD5, TD4 2.4, TD4 2.2 Set comprises ca. 390 pieces. With this fixing set you can replace all fixings visible from the outside with high-quality V2A stainless steel fixings. The side and rear door screws as well as the body fixings at the rear are made especially for us and are identical in looks to the original fixings (Torx heads).In addition special bonnet rubber screws are supplied, too. The fixing sets are clearly arranged in 10 individual bags for ease of fitting: rear body hinges rear body fixings grille load bay strip and cat eyes bonnet hignes rear crossmember spare wheel carrier headlight surrounds and front wing covers side door hinges inner door sills and A post + 2 rubber screws + anti-seize paste Very easy, DIY fitting possible. We supply anti-seize paste for all screws. Please note that this kit does not include stainless bolts for the bulkhead vent flaps (part nr. LKSB). Note: The screws for the door hinges may have to be shortened.The sets for the various sections contain more screws to cover different attachments. This means that screws may be left over under certain circumstances.
Prices incl. VAT;
Stainless steel mounting set for floor panels in the front footwell, for Land Rover Defender
Front floor mounting set, stainless steel for Land Rover Defender Stainless steel fastening set for floor panels in the front footwell, for Land Rover Defender Fastening set includes the parts for driver and passenger side.Ideal for Nakatanenga storage compartment footwell - Land Rover Defender.
Prices incl. VAT;
Hinge pin ventilation flap Defender
Robust hinge pins for ventilation flaps Suitable for all Defender up to MY 2007Material: Stainless steelThe set consists of 4 bolts and 10 nuts (incl. 2 spare nuts).Please note: This set is not included in our stainless steel bolt set!
Prices incl. VAT;
Stainless Steel Bolt Kit for Front Bumper Defender 90/110/130
Fits all MY - TDi, TD5, TD4 2.4, TD4 2.2 with original-bumper Full bolt kit for one bumper - stainless steel bolts for Defender 90/110/130, comes with assembly paste. Do not use in conjunction with a winch or clevis pin bumper!
Prices incl. VAT;
Windscreen Bracket Kit for Land Rover Defender
Windscreen Bracket Kit for Land Rover Defender The original windscreen support brackets on the Defender are one of those details on the car that sooner or later cry out for cosmetic surgery. All kinds of corrosion – by exposure, metal contact, environmental or automotive chemicals – affect the parts and simply make them look shabby. The result is rust, peeling paint and streaking on the bodywork. Fortunately, replacing the brackets is one of the easiest jobs on the Landy. Our replacement brackets are available in two versions: black powder-coated or anodized aluminum. Both processes - anodizing and powder coating - ensure extremely resistant and durable sealing of the aluminum parts. During anodizing, electrolysis creates a porous surface structure, which is particularly suitable to absorb color pigments. In a last step, the anodizing is then compacted and thus sealed. However, black anodized aluminum tends to fade, which is why we have opted for powder coating for the deep black option. If you’re aiming for a look other than black or aluminum gray, you can of course paint it yourself or have it painted. You can also achieve your desired custom effect with our range of RAPTOR products. Or simply order the parts right here in the store with black powder coating from a professional for little extra cost. Suitable for all Land Rover Defenders 90/110/130. Supplied in pairs, gaskets and mounting materials are included.
Prices incl. VAT;
Stainless steel mounting kit for floor panels in footwell 2nd row of seats, for Land Rover Defender and Series
Stainless steel mounting set for floor panels in the footwell 2nd row of seats, for Land Rover Defender and Series. Fastening set includes the parts for driver and passenger side
Prices incl. VAT;
Mounting kit for all CargoBear system roof racks
The stainless steel mounting kit Is for mounting various brackets on the CargoBear system roof rack or on the Cargobear crossbar - e.g. the CargoBear quick mounting frame is attached with this mounting kit (the mounting kit is already included with the quick mounting frame). The kit consists of 4 stainless steel sliding blocks with matching M8 stainless steel screws. The long screw makes installation easier, as the sliding block can be easily positioned with it (see 2nd and 3rd picture). Dimensions of a sliding block: Length: 65 mm Width: 18.5 mm Height: 6 mm Material: Stainless steel Please note: The CargoBear can generally be fitted to a vehicle with a lifting roof/camping roof, but a few things must be taken into account. Please contact us for more information. Suitable for all CargoBear 1 + 2 roof racks!
Prices incl. VAT;
Bonnet Hinges Defender, anti-theft
Hinges for Defender bonnet Nakatanenga bonnet hinges for Land Rover Defender (all models, all model years) address two problems associated with the original hinges: for one they are more durable and have no play, additionally they greatly complicate bonnet theft. We have put emphasis on ease of fitting - this can be done by yourself. There are no holes that need drilling as only existing ones are used, all fixings, icluding the special safety-socket are supplied. The hinges are available in stainless steel or with black powder coating, please choose the desired finish.
Prices incl. VAT;
Stainless Steel Grille Mounting Brackets for Defender Models with Air Conditioning
Stainless Steel Front A/C Panel Mounting Kit, for Land Rover Defender. Machine cut and CNC pressed for accuracy. Ready to bolt on. Set consists of: 4 x No8 x 16 mm A2 Pz2 bolts.2 x A4-70 No14 x 25 mm stainless steel Pz3 bolts4 x M5 A4 washers2 x M6 A4 washers2 x M8 A4-80 x 20 mm hex head screws2 x M8 A4 washers4 x No6 plastic lock nuts2 x No14 captive U-nuts2 x M8 A2/304 captive nuts Note - A4-80 is the equivalent of high strength mild steel 8.8 bolts
Prices incl. VAT;
Door Hinge Bolt Set Stainless Steel for Land Rover Defender 110 SW/130CC
Door Hinge Bolt Set Stainless Steel for Land Rover Defender 110 SW/130CC NOW EXCLUSIVELY manufactured for us in ORIGINAL Land Rover form.The bolts have identical heads as the original bolts on the Defender!!!!Suitable for all years of construction - Tdi, Td5, Td4 2.4, Td4 2.2Complete set of screws for 4 doors and rear door, V2A stainless steel for Defender 110 SW/130CC, incl. Anti Seize Paste. Note: The screws for the door hinges may have to be shortened.
Prices incl. VAT;
Lashing rail accessories, screw fitting M8x45 with star handle
Lashing rail accessories - M8x45 screw fitting with nut and washer The M8x45 screw fitting is a practical accessory for lashing rail systems. It is supplied with a nut and washer and is ideal for securely fastening load securing elements. Thanks to the standardised thread size M8 and the length of 45 mm, it is versatile and provides a reliable connection.
Prices incl. VAT;
Screw set bonnet Land Rover Defender
Screw set bonnet Land Rover Defender optionally for Tdi /Td5 and for Td4 Defender bonnet screw set includes 2 front bumper screws, six stainless steel hinge screws with washers and nuts and two plastic hinge bushes The screws are supplied as Allen screws.
Prices incl. VAT;
Land Rover Defender Twin Nozzle Washer Jet, black anodized
Defender front washer nozzle made of aluminium - durable replacement for standard nozzles Land Rover Defender Twin Nozzle Washer Jet (CNC Machined) This item has been designed and manufactured as a direct replacement to the originals which snap, break and fail at the first sign of frost. Manufactured from aircraft grade aluminium which has been hard anodized black and supplied with new brass mounting nut and seal. These are an ideal upgade to you defender and a far superior product to the originals and pattern versions which are currently on the market. Price per piece.
Prices incl. VAT;
Stainless steel fixing set for Land Rover Defender 110 HT (2-doors)
Produced with ORIGINAL Land Rover heads EXCLUSIVELY for us The screws' heads are identical to the original Defender screws!!! Set comprises ca. 390 pieces. With this fixing set you can replace all fixings visible from the outside with high-quality V2A stainless steel fixings. The side and rear door screws as well as the body fixings at the rear are made especially for us and are identical in looks to the original fixings (Torx heads). In addition special bonnet rubber screws are supplied, too. The fixing sets are clearly arranged in 10 individual bags for ease of fitting: rear body hinges rear body fixings grille load bay strip and cat eyes bonnet hignes rear crossmember spare wheel carrier headlight surrounds and front wing covers side door hinges inner door sills and A post + 2 rubber screws + anti-seize paste Very easy, DIY fitting possible. We supply anti-seize paste for all screws. Please note that this kit does not include stainless bolts for the bulkhead vent flaps (part nr. LKSB). Note: The screws for the door hinges may have to be shortened.The sets for the various sections contain more screws to cover different attachments. This means that screws may be left over under certain circumstances.
Prices incl. VAT;
Mirror arms foldable for Land Rover Defender until BJ2016
Adjustable mirror arms Thanks to their unique fastening mechanism, nothing flutters, even at high speeds. The real highlight, however, is the mirror's folding function. Simply open the Torx screw, fold the mirror down by 90° and the field of vision to the rear is extended many times over.Especially for vehicles with a living cabin or when driving with a trailer, these mirror arms offer real added value! There is no need to attach mirror extensions.Product features: unique mirror flip mechanism precisely manufactured from high-strength aluminium corrosion & UV resistant coating also fit the original Land Rover Defender hinges set includes two pieces Length approx. 19cm Note: When using these mirror arms, the use of a mirror heater is not necessary.
Prices incl. VAT;
Windscreen Washer Nozzle for Land Rover Defender
Windscreen Washer Nozzle for Land Rover Defender The windscreen wipers of the Land Rover Defender 90/110/130 do not have an easy job with dried insect remains after long motorway journeys or mud after off-road use. This is where the windscreen wiper nozzles come to the rescue - they are attached to the arms of the wipers and ensure optimum cleaning results.
Prices incl. VAT;
Land Rover Defender Twin Nozzle Washer Jet, black anodized
Land Rover Defender Twin Nozzle Washer Jet (CNC Machined). This item has been designed and manufactured as a direct replacement to the originals which snap, break and fail at the first sign of frost. Manufactured from aircraft grade aluminium which has been hard anodized black and supplied with new brass mounting nut and seal. These are an ideal upgade to you defender and a far superior product to the originals and pattern versions which are currently on the market. Price per piece.
Prices incl. VAT;
Nakatanenga Headlight Bracket Butterfly
Nakatanenga Headlight Mount Butterfly The Butterfly holder enables vibration-free mounting of a headlamp due to its large contact surface. It is made of 3 mm stainless steel and its ceramic-blasted surface gives a high-quality impression. On request, it is also available with a black powder coating.The holder is available with different hole diameters - the 6mm version is suitable for the Vision-X Solstice LED worklight, for example, while the 8mm version is intended for the Signal-Stat LED reversing spotlight. There is a separate version for the Weldex worklights and reversing lights.
Prices incl. VAT;
Nakatanenga antenna holder bumper
Perfect mounting on the vehicle - antenna holder for the bumper The Nakatanenga antenna holder allows easy mounting of an antenna on the OEM bumper of the Land Rover Defender 90/110/130, making it easy to attach a CB or amateur radio antenna. The holder is made of stainless steel.
Prices incl. VAT;
A-pillar lamp holder Jeep Cherokee & ComancheLampenhalter A-Säule Jeep Cherokee & Comanche
A-pillar lamp holder Jeep Cherokee & Comanche The brackets allow the mounting of lights on the A-pillar of the Jeep Cherokee XJ and Jeep Comanche MJ, supplied in pairs, incl. blind rivet nuts. Ideal for this mounting location are compact LED lights with tightly focused illumination (thus minimizing reflections from the bonnet), we recommend the Vision-X Cannon LED driving lights here. The brackets are made of stainless steel and can also be supplied with a black powder coating - please select the desired variant below.
Prices incl. VAT;
Side mirror holder incl. mirror for Mercedes-Benz G-Class
Optimum rear view - with the fold-out side mirror holders for the G-Class More visibility, more safety: thanks to the integrated "Monkey Flip" system, the innovative side mirror holders from Offroad Monkeys can be folded outwards by 90° in no time at all - ideal when driving with a trailer or in confusing terrain. Originally developed for the Defender, this system is now also proving its worth on the G-Class.However, the mirror holders are not only impressive in terms of functionality - they also set new standards in terms of technology and appearance. The robust mirror arm can be securely fixed at a 30° angle, remains vibration-free even at high speeds and thus ensures a clear view to the rear.Technical highlights & advantages: Precisely machined from high-strength aluminium Corrosion and UV-resistant thanks to special surface coating Stable mirror arm with 30° angle adjustment Can be quickly folded outwards by 90° for an extended field of vision Plastic washers prevent contact corrosion between screw and hinge Can be painted and completely dismantled - 100% Made in Germany Compatible with the following G-Class models: Model W460 & W461 G-Professional PUR Bundeswehr Wolf Puch G - ÖBH (Austrian Armed Forces) Greenliner Complete set consisting of: Base plate (left and right) 2 mirror arms 2 side mirrors
Prices incl. VAT;
Nakatanenga A-pillar lamp holder Jeep Wrangler JK
Lamp holder for the A-pillar - perfect position for additional lighting The Nakatanenga lamp holders allow quick and easy mounting of lights on the A-pillar of the Jeep Wrangler / Jeep Wrangler Unlimited from model year 2007 - the mounting is done without drilling, very easy, with the already existing screws. A foam rubber base ensures a rattle- and scratch-free fit. This mounting location is ideally suited for tightly focused headlights, e.g. the Vision-X Cannon 25W LED spotlights. These are not included in the scope of delivery and, if shown, are for illustration purposes only. Supplied in pairs, the brackets are available with black powder coating or without (e.g. for painting in car colour).
Prices incl. VAT;
Anti-theft nut set for winch and front bumper
Safety nut set - optionally M10, M8 or M6 1 Set of Security Nuts & WrenchesSecure your valuable accessories firmly to your Land Rover with these tamper proof nuts. Ideal for securing your winch and front bumper. Each set contains 4 nuts and 1 key.
Prices incl. VAT;
Why Special Fasteners for Off-Road Vehicles?
Standard hardware store items often aren't sufficient for the demanding daily life off-road. Vehicles are subjected to special stresses here:
- Vibrations: Constant corrugated tracks and off-road driving challenge every bolted connection.
- Corrosion: Moisture, mud, road salt – fastening elements are often exposed unprotected to the elements.
- Loads: Attachments like roof racks, jerry can holders, or awnings exert sometimes high forces on their mounting points.
Therefore, choosing robust, suitable, and corrosion-resistant fasteners, such as those made from stainless steel, is crucial for the longevity and safety of your modification or repair.
Our Assortment: From Stainless Steel Screws to Special Brackets
This category includes a variety of important small parts for almost any project on a 4x4:
- Screws, Nuts & Washers: A wide selection in various sizes, materials (especially stainless steel A2 and A4 for optimal corrosion protection, but also high-tensile grades), and head shapes for all conceivable applications.
- Hardware: Hinges, latches, handles, angles, and connectors – ideal for building storage boxes, interior conversions, or body adjustments.
- Mounts & Brackets: Universal or specific holders for attaching equipment, tools, antennas, auxiliary lights, or other add-on parts to the vehicle.
- Rivets, Clamps & Locking Elements: Everything needed for professional and durable fastening, from blind rivets and hose clamps to lock nuts.
Quality You Can Rely On
We at Nakatanenga know that no compromises should be made, especially with these seemingly inconspicuous parts. That's why we place the greatest value on:
- Material Quality: Preferably stainless steel or high-strength materials with appropriate surface treatment.
- Fitment: Wherever possible, we offer specific solutions for common vehicle models.
- Practicality: Our selection is based on experience gained over countless workshop hours and travel kilometres.
For Repair, Modification, and Custom Projects
Whether you need to carry out a quick repair on the go, plan the interior conversion of your expedition vehicle, securely mount a roof rack, or construct a custom bracket for your equipment – in our "Screws, Hardware, Mounts" category, you'll find the reliable small parts you need for your project.
No compromises on fastening! Browse through our extensive selection of screws, hardware, and mounts now and find exactly the parts you need for your next off-road project or repair – in proven Nakatanenga quality!