Ähnliche Artikel
Extended wheelarches for Land Rover Defender Often the fender flares are too narrow for the Defender. With this widening you get a wheel cover of + 30 mm. This extended wheelarches for Defender is made of a very flexible material, which allows easy and quick attachment to the wheel arch. The 30 mm widening & increase is also great for wider tires. Even a trackless dismantling is possible without further ado. suitable for Land Rover Defender until MY2016 incl. plastic expanding rivets NOTE: You will need a piece (white, dashed mark) of your old widening (picture 1) on the front axle to attach this fender widening. You can see a detailed marking for the cutting on picture 2 and picture 3. On picture 4 you will find the final result as well as the position at which point a further manual drilling is necessary. Finished!
Prices incl. VAT;
Fender extensions universal This broadening in discreet optics is suitable for vehicles with and without inner edge in the wheel arch. Ideal for widening spacers, wider tires, rims with greater press-in depth, etc. Available in different widths: 18 mm, 23 mm, 28 mm - please select the desired widthLength: 150 cm Suitable for: car, SUV, VAN, trailer, camper, construction machine, agricultural machine, etc. Attention - installation instructions: The adhesive tape that we use for this profile is the best that we have: Article 3M 4222If the extension fender will be applied on a normal situation, we don not need to use Primer.The important is to follow the correct fitting instruction: 1) Perfect cleaning of the surface that will receive the adhesive tape2) Position the profile and apply using a strong pressure for all the length of the adhesive tape3) Correct temperature for the application: minimum + 20°C4) To be sure that the adhesive tape is working correctly, you can apply a masking tape, to keep the pressure for the next 24 hours5) Do not wash the car for 48 hours after the application
Content: 1.5 running meters (€23.30 / 1 running meters)
Prices incl. VAT;
Mudguard widening universal - 2 Pcs - 60 millimetres wide and a 150 centimetres long. An inexpensive, flexible and beautiful solution. The wing extension is made of robust hard rubber. The specified width of 60 mm is measured when mounted from the outer edge of the body. This means that the wing extension is 90 mm wide in total, 30 mm of which are available for mounting on the wheel arch, the remaining 60 mm are for covering the tyre. The fender extension is mounted from "below", i.e. for mounting on the vehicle there should be a minimum of 1 cm wide web edge (= wheel arch edge parallel to the tread of the tyre) in the wheel arch. The widening is screwed from below to the web edge with the fastening screws included in the scope of delivery. Scope of delivery: 2 pcs. wing extensions a 150 cm longFixing screws
Content: 3 running meters (€33.00 / 1 running meters)
Prices incl. VAT;
TREKFINDER fender extension kit Land Rover Defender 20mm, 150cm long
€99.00
Prices incl. VAT; / Parcel shipping
Whether you’re going for a more muscular look or just better off-road performance, there are many good reasons to widen your Defender’s stance. You can go for fat MT tires or you can widen the track with wheel spacers or negative offset rims to achieve the desired effect. But keep in mind that your wheel covers may no longer be sufficient for your country’s road regulations and that in turn could affect your 4x4’s road legality. Apart from costly surprises in traffic stops, you also want to avoid potentially dangerous water and mud spray or debris being catapulted from exposed wheels. And then there’s also that slightly unbalanced look…
At Nakatanenga, we thought there’s got to be a better solution than what’s out there and that’s why we teamed up with the experts at TREKFINDER to give you a functional, easily attached and exclusive solution to extend your existing original wheel arch guards.
The result is a discrete self-adhesive rubber extension strip that widens the original Land Rover wheel arch guard by another 20 mm, simply by sticking it onto the original part. There’s no need to remove the original parts, drill new screw holes etc. The new guard’s protruding adhesive lip fits perfectly onto the original part and makes it very easy to position the 1.5 m extension perfectly. This should also work with identical after-market parts by Britpart et al, but with non-original parts we are unable to provide a warranty, of course. With a little experience and some planning, though, you can easily adjust the strips’ required length or their radius with a boxcutter and some sanding paper. Again, alterations are not covered by our product warranties. And last but not least, since our wheel arch extensions are self-adhesive, they are just as easily removed as they are mounted.
Our Defender wheel arch extensions by Nakatanenga and TREKFINDER are available in a set of four with identical front and rear attachments and are exclusively available in our shop.
Material:
Black rubber, very good quality - flexible and almost indestructible
Complete vehicle kit:
4 pieces of 1,500 mm length each