Rock & Tree Slider without step for Land Rover New Defender 110, 130, model year 2020 and later

Towing and recovery eyes for the New Defender - Robust. Conspicuous. Indispensable. Do you want your New Defender to be not only stylish, but also absolutely suitable for off-road use? Then our red towing and recovery eyes are just the thing for you! This set of 1 pair of eyelets for the rear of your New Defender combines high functionality with a striking design - perfect for anyone who wants to be prepared for any adventure.   Why towing and recovery eyes for the New Defender? Whether off-road, on unpaved roads or in an urban environment - sometimes you simply need a reliable way to secure or recover your vehicle. Our towing and recovery eyes offer you the safety and robustness you need to be prepared for any situation. And all in an eye-catching red colour that is not only practical, but also a real eye-catcher. Advantages at a glance: High-quality materials: The eyelets are made of robust cast steel and offer maximum resilience. Eye-catching design: The bright red not only ensures better visibility, but also gives your Defender a striking look. Easy to fit: The eyelets have been specially developed for the New Defender and can be installed without modifying the vehicle. Versatile: Perfect for towing, recovering or securing your vehicle in any situation - an always-ready mount for tow ropes and recovery straps. Who are the towing and recovery eyes suitable for? Off-roader: For all New Defender drivers who are travelling off the beaten track and want to be prepared for any situation Adventurer: Perfect for outdoor enthusiasts who want to be able to recover their New Defender safely even in the most difficult terrain. Design lovers: If you want to give your New Defender a sporty and functional look, these eyelets are the perfect choice.  

Snorkel for Land Rover New Defender, from model year 2020 The snorkel not only enables safe driving through deeper water with reduced risk to the engine, it also brings advantages in dusty environments: The raised air intake at roof height ensures cleaner, less dusty air, and the air filter needs to be replaced or cleaned less frequently.

Coupling rod/ Rods for height adjustment Installing lift kits for 4x4’s usually requires complex (and expensive) modifications. Not so if your vehicle comes with a self-regulating air suspension, like the New Defender. Raising the ride height of the New Landy by 1 or 1,6 inches takes very little in terms of effort or budget. The principle is very simple and has been employed with Discovery 5 and Range Rover Sport models for quite some time. Simply replace the original rods on all four wheel suspensions with our replacements. The new rod’s different dimensions will trick the self-regulating suspension to permanently lift the ride by 1” or 1,6”, respectively, in all drive modes. Once the new lift rods are installed, the vehicle’s sensor system will adjust itself automatically to the new ride height after the first restarting of your car. Resetting the ride to original factory settings is just as easy and only a question of minutes. We produce these 1“ and 1,6“ lift rods for the New Defender in our own workshop. The rods are laser machined from extremely robust high-quality plastics and the bushings are created in an additive process. This makes both components highly resistant to degradation by weather or chemicals, like fuel, oils etc. The custom-designed bushings are flexible and extend to both sides of the rods’ connections. In terms of quality, this is a far superior solution over many other products on the market, specifically aluminum rods with cheap off-the-shelf cable grommets. Available as +1“ or + 1,6“. Caution: these products are without part certification and are not road legal. They¬¬ may not be used on public roads.

Upgrading the reverse lights on your car is always a good idea – better visibility for others and for yourself when you’re parking backwards, when maneuvering with and without trailer or driving off-road in the dark. Stronger reverse lights also greatly improve the performance of reverse cameras. For the New Defender, we are offering an extremely elegant solution that needs no external fittings and has the seamless appearance of standard equipment. Underneath the rear lights on both sides of L663, two recesses in the body are ideal for housing the additional reverse lights with their six white LEDs each. Mounting the LEDs in the recesses is easy. Two perfectly fitted brackets are attached inside the gaps with self-adhesive tape. Once the plinths are fitted the LEDs are simply screwed in. The wiring is plug & play and includes all the necessary connections to the existing reverse lights. Installation or de-installation (if necessary) are simple DIY projects because the rear light panels are only clipped in and can easily be removed. Since there are no drill holes or other alterations necessary, there are no permanent traces or damages on the vehicle’s exterior. The high-quality LEDs with their watertight housing and the tough polycarbonate lenses provide more safety for you. The custom-fitted design and the superior components are a real improvement for the overall appearance of the Defender’s rear. Please note:The reverse LEDs come with an E-certificate but we have to emphasize that regulation in the EU prohibits the use of more than two reverse lights on passenger vehicles in regular road traffic. To accommodate these provisions, we are offering perfectly fitted covers for the LEDs to be used on publics roads or for technical inspections.

Molle panel for the rear window - damage-free installation without drilling The bigger the vehicle, the greater the temptation to leave everything lying around. But especially in space monsters like the New Defender with its maximum load compartment volume of over 2500 litres (in the 130), it is extremely important to keep everything tidy and have quick access to equipment and accessories. Our modular panel for the rear window is the perfect organiser for the most important and most frequently used equipment. The aluminium window panel is simply attached to the window using suction cups and is compatible with all Molle products in our range. The possibilities for combination and personalisation are therefore virtually endless: whether you want to stow several MOLLE bags, the first aid kit or something else neatly with our tensioning and fastening straps, this modular panel makes it possible. FixPlus Straps are also a good addition. And if you don't need the panel at the moment or if you sell the vehicle, it can be dismantled without leaving a trace. Material: ALUMINIUM Scope of delivery: 1 vehicle panel incl. fastening material

Tailgate Organizer - Rear door storage system for the New Defender from 2020 onwards. Where to put all the bits and bobs in the touring vehicle? First-aid kits, multimeters, work gloves, winch controls, tyre repair kit etc.? - all that needs to be stowed away. The Tailgate Organizer makes use of the mostly unused space on the tailgate. In several pockets with MOLLE fastening system (abbreviation for MOdular Lightweight Load-carrying Equipment) all kinds of small items can be stowed and are at hand when they are needed. The advantages of MOLLE Tailgate Organizer Hardbase compared to textile MOLLE: quicker to attach and detach, e.g. first aid bag more stable than textile MOLLE can also be used in combination with QuickFist for tools or ropes. Free access to the warning triangle compartment Rear door compartment is enlarged by the organiser Please note before mounting: The hardbase is asymmetrical, the wider side next to the recess must be on the right side.  The sets are composed as follows: SET1:1x MOLLE multi-purpose bag, open1x MOLLE multi-purpose bag, large1x MOLLE universal bag, large1x stainless steel fastening material1x MOLLE Tailgate Organizer base plate hardbase made of aluminiumoptional: 1x MOLLE first aid bag with Tear-Off-Base SET2:1x MOLLE multi-purpose bag, open2x MOLLE multi-purpose bag, large1x stainless steel fastening material1x MOLLE Tailgate Organizer base plate hardbase made of aluminiumoptional: 1x MOLLE first aid bag with Tear-Off-Base Bag Material: 100% nylon PU coated And by the way: At Nakatanenga we only use materials with 100% nylon PU coating for all textile articles. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for plastics of all kinds and are even used in food and cosmetics. However, they accumulate in the environment and are suspected of acting like endogenous hormones due to their molecular nature. This is highly questionable from a toxicological point of view and is considered to be a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-safe alternatives such as nylon PU for the coating of textile products.