Increased brightness for long-distance and close-range illumination Especially when driving on country roads and unpaved paths, increased visibility can be an important safety factor. The LEDriving® Functional Series FX Gen 2 portfolio provides additional close-range and far-field illumination on dark roads. Even in poor visibility conditions or at dusk, the high-performance LEDs achieve a range of up to 635 metres and daylight conditions with a colour temperature of 6000 Kelvin. The auxiliary headlamps of the FX series impress with a special reflector design and not only provide a modern and appealing look, but also reduce glare for more visibility in road traffic. They can be used both as additional LED headlights and as powerful worklights. Both versions of the lights are fully ECE-compliant and therefore suitable for use in road traffic. In addition, OSRAM has developed a special mounting kit that is compatible with all auxiliary headlamps of the FX Gen 2 series for individual mounting. Versatile in use, they defy numerous environmental influences and are particularly light and at the same time robust and resistant thanks to high-quality materials such as the aluminium housing and the stable polycarbonate lens. Complete reverse polarity protection prevents damage due to overvoltage and contributes to a longer service life. The FX series auxiliary lights have been tested and validated in a DIN-certified environmental simulation laboratory for extreme external influences with regard to water, dust, shock, heat, cold and permanent vibration in accordance with the highest IP & IK protection classes IP6K8 & IP6K9K. Their variability gives the FX series a flexible range of applications. They can be fitted to cars, trucks, agricultural machinery, commercial vehicles, construction vehicles, caravans, off-road vehicles and quads. OSRAM provides a 5-year warranty on these products. Product details: OSRAM LEDriving® auxiliary headlamp Lightbar FX250-SP GEN 2 | LEDDL129-SP Features: SPOT BEAM = For particularly focussed high beam distribution Light beam of 360m Luminous flux: 2,120lm, rated power: 27W Cold white light with 6000K For 12V & 24V vehicles DT04-2P, DT06-2S connector, cable length: 1200mm Over- and undervoltage protection ECE R10, R149, ECE (Ref. 30) certification. Highest protection classes: IP6K8 & IP6K9K Robust and durable - shatterproof polycarbonate lens and die-cast aluminium housing with special black coating Efficient reflector design with 10 OSRAM high-power LEDs Side brackets included 5-year OSRAM guarantee 1) OSRAM LEDriving® auxiliary headlamp Lightbar FX250-CB GEN 2 | LEDDL130-CB Features: COMBO BEAM = Combined beam pattern for both far-field and near-field illumination Light beam of 320m Luminous flux: 2,520lm, rated power: 37W Cold white light with 6000K For 12V & 24V vehicles DT04-2P, DT06-2S connector, cable length: 1200mm Over- and undervoltage protection ECE R10, R149, ECE (Ref. 25) certification. Highest protection classes: IP6K8 & IP6K9K Robust and durable - shatterproof polycarbonate lens and die-cast aluminium housing with special black coating Efficient reflector design with 10 OSRAM high-power LEDs Side brackets included 5-year OSRAM guarantee 1) Product description: Outstanding illumination, performance, quality, form, durability and functionality. Maximum optical efficiency, effectiveness and homogeneous light distribution Coverage of far-field illumination Perfectly matched to individual requirements and needs for multivariant use Special reflector design for an attractive and modern appearance and reduced glare Robust and resistant - for a long service life Increased safety off-road and on-road ECE-compliant and approved for use in road traffic Fields of application: Cars, trucks, 4x4s, ATVs, agricultural vehicles, commercial vehicles, construction vehicles, quads, caravans, etc.1) Exact conditions at: www.osram.de/am-garantieNote: Single mount - no installation in pairs necessary, as two certified light sources are used.  

OSRAM LEDriving® PROFESSIONAL series PX/AX worklights Accessories With the portfolio of OSRAM LEDriving Professional Series PX worklights, it is now possible to find exactly the right lighting for a variety of specialised professional tasks and applications. In addition, the floodlights can be mounted in three different ways: Direct Mounting, Flexible Standard Mounting and Heavy Duty Mounting - Again, OSRAM has developed specially designed brackets and also a cable with DT connector. The LEDriving Heavy Duty Mounting Kit PX is compatible with all OSRAM LEDriving worklights of the Professional Series PX. It can be attached to the vehicle with just two screws and is quick and easy to fit, making installation of the LEDriving Professional Series (PX) worklights quicker and easier. All components of the mounting kit are made of stainless steel, it has a vibration resistance of at least 12g rms and is therefore specially developed for use on heavy-duty vehicles and is particularly robust and resistant. In addition, the bracket can be adjusted to a tilt angle of up to +/- 30 degrees to direct the light from the worklights where it is needed. OSRAM grants a 5-year guarantee on these products1)2) 1) Additional worklights without ECE approval for use as worklights are approved for use on any vehicle in accordance with StVZO §52 (7). However, they must not be used when switched on while driving, and individual special regulations and laws of the countries outside Germany must be observed.2) Exact conditions at www.osram.de/am-garantie   Product information Connection Cable 300 DT AX Heavy Duty Mounting Kit PX Flexible Mounting Kit Nominal voltage 12 / 24 Volt     Dimension L 3000mm L: 45mm- B: 43mm- H: 35mm L: 123,3mm- B: 35mm- H: 89,0mm Weight  249,00 g 305,00 g 174,00 g Guarantee - OSRAM 2 years 5 years 5 years Professional worklights from the PX series can be found in the store in various luminous flux units / lumens: 1500lm  2500lm 3500lm 4500lm

OSRAM neck light Light is versatile Technical data: Rated voltage: 3.7V Luminous flux: 265lm Light colour LED: white This rechargeable neck light with two individually detachable torches from OSRAM is perfect for professional and private use. With two light functions up to 265lm (high), 130lm (low) and an adjustable 90 degree angle, this offers different settings for a variety of tasks. The LEDinspect Wearable Neck Light is particularly impressive with its great flexibility - it can be used around the neck, on the head, in the hand or on a magnetic surface. The rechargeable battery allows up to 3 hours of operation at high power or up to 4.5 hours at low power and with a charging time of only about 1.5 hours, this OSRAM lamp is also quickly ready for use again. A USB Micro B charging cable with two connections for the individual lamps to charge the lithium battery is included. In accordance with protection class IP54, this lamp has protection against the penetration of dust particles and against splashing water and is tested for impact resistance in accordance with IK07. With a weight of only 115g and the flexible design, the product is easy to store and transport and is therefore ideal as a light for handicraft work, craft activities, car repairs and also in everyday life.OSRAM also provides a 2-year warranty*.*Exact conditions at: www.osram.de/am-garantie 2-year guarantee - this guarantee exists independently of the existing free statutory rights to claim for defects. The statutory defect rights are not restricted by this guarantee. Detachable torches: High flexibility - can be placed around the neck, on the head, in the hand or on a magnetic surface. Two light functions: Up to 265lm (strong) & 130lm (weak). Charging time: With a charging time of only 1.5 hours, this OSRAM light is quickly ready for use. Additional product data: Battery type: Rechargeable Battery: High-quality lithium-ion battery 2x3.7V Li-Ion 500mAh included in delivery Dimensions: W 39mm x L 224mm x H 150mm Please note the legal information on batteries HERE. For certain types of batteries, we are legally obliged to charge a deposit.