Bonnet Hinges Defender, anti-theft

Polished stainless steel door hinge set for Land Rover Defender until MY2016 and Series 3 Enhance the appearance of your Land Rover! Door hinge set for front doors or 2nd row doors for Land Rover Defender until MY 2016 and Series III. These hinges are cast from 316 stainless steel and polished. They have the same footprint as the original door hinges. 4 hinges, 2 of which contain the holes for mounting the exterior mirror.Mounting material included.

Hinge solutions for front, centre and rear doors - Defender & Series Door hinge set for front doors for all Defender / Series III Door hinge set for rear door for all Defender, Series II & III Door Hinge Set for Middle (2nd) Door Row for all Defender Steel fixing bolt set included in delivery

Stainless steel screw set for Land Rover Defender 90 SW / 90 HT / 90 Softtop Produced with ORIGINAL Land Rover heads EXCLUSIVELY for us. The screws' heads are identical to the original Defender screws!!! Fits all model years - TDi, TD5, TD4 2.4, TD4 2.2 Set comprises ca. 390 pieces. With this fixing set you can replace all fixings visible from the outside with high-quality V2A stainless steel fixings. The side and rear door screws as well as the body fixings at the rear are made especially for us and are identical in looks to the original fixings (Torx heads).In addition special bonnet rubber screws are supplied, too. The fixing sets are clearly arranged in 10 individual bags for ease of fitting: rear body hinges rear body fixings grille load bay strip and cat eyes bonnet hignes rear crossmember spare wheel carrier headlight surrounds and front wing covers side door hinges inner door sills and A post + 2 rubber screws + anti-seize paste Very easy, DIY fitting possible. We supply anti-seize paste for all screws. Please  note that this kit does not include stainless bolts for the bulkhead vent flaps (part nr. LKSB). Note: The screws for the door hinges may have to be shortened.The sets for the various sections contain more screws to cover different attachments. This means that screws may be left over under certain circumstances.

Door Hinge Bolt Set Stainless Steel for Land Rover Defender 110 SW/130CC NOW EXCLUSIVELY manufactured for us in ORIGINAL Land Rover form.The bolts have identical heads as the original bolts on the Defender!!!!Suitable for all years of construction - Tdi, Td5, Td4 2.4, Td4 2.2Complete set of screws for 4 doors and rear door, V2A stainless steel for Defender 110 SW/130CC, incl. Anti Seize Paste. Note: The screws for the door hinges may have to be shortened.

Stainless Steel Screw Set for Land Rover Defender 110 SW / 110 CC / 130 CC EXCLUSIVELY manufactured for us in ORIGINAL Land Rover style.The screw heads match the original Defender screws in shape and appearance! The complete set contains more than 440 parts. It allows the externally visible screws on the vehicle to be replaced with high-quality, corrosion-resistant V2A stainless steel screws. Especially on older Defenders, this gets rid of unsightly rusty screw heads while retaining the characteristic original appearance. Suitable for all model years – TDi, Td5, Td4 2.4 and Td4 2.2. A particular highlight: the screws for the side-door and rear-door hinges as well as the rear body mounting screws are manufactured specially for us and match the shape of the original Land Rover screws, including the Torx drive. Specially manufactured bonnet buffer screws are also included in the set. With more than 440 parts, organisation matters. That's why the screws are clearly sorted into 10 separate bags according to the relevant area of the vehicle. The set includes screws for the following areas: rear door hinges rear body mounting radiator grille load-area trim + reflectors bonnet hinges rear crossmember spare wheel carrier headlight surrounds + wing covers side door hinges inner door sills + A-pillar 2x bonnet buffer screws anti-seize paste Installation is generally straightforward and can also be carried out by competent DIY mechanics without specialist workshop equipment. The clearly sorted packaging makes it easy to identify which screws belong to which area of the vehicle. Anti-seize paste included:The set includes anti-seize paste for installation. When replacing such a large number of fasteners with stainless steel screws, this is simply part of a properly thought-out kit. Please note: This set does not include the stainless steel hinge bolts for the ventilation flaps (item no. LKSB). Depending on the vehicle and installation situation, the door hinge screws may need to be shortened. The individual sub-sets contain some additional screws to cover different vehicle versions and accessories. It is therefore possible that some screws will remain unused after installation.

Produced with ORIGINAL Land Rover heads EXCLUSIVELY for us The screws' heads are identical to the original Defender screws!!! Set comprises ca. 390 pieces. With this fixing set you can replace all fixings visible from the outside with high-quality V2A stainless steel fixings. The side and rear door screws as well as the body fixings at the rear are made especially for us and are identical in looks to the original fixings (Torx heads). In addition special bonnet rubber screws are supplied, too. The fixing sets are clearly arranged in 10 individual bags for ease of fitting: rear body hinges rear body fixings grille load bay strip and cat eyes bonnet hignes rear crossmember spare wheel carrier headlight surrounds and front wing covers side door hinges inner door sills and A post + 2 rubber screws + anti-seize paste Very easy, DIY fitting possible. We supply anti-seize paste for all screws. Please  note that this kit does not include stainless bolts for the bulkhead vent flaps (part nr. LKSB). Note: The screws for the door hinges may have to be shortened.The sets for the various sections contain more screws to cover different attachments. This means that screws may be left over under certain circumstances.

This full stainless steel spare wheel carrier for Defender SW/HT is the successor to our Defender spare wheel carrier RRHNAHI sold by the hundreds. It is available in two colours. The Defender rear door suffers from the heavy weight of the large spare wheel. Depending on use, after about five years or 50.000 kms the first cracks in the rear door frame appear. There are two solutions for this well-known problem: either move the spare wheel to the bonnet (see our bonnet spare wheel mount for that, not possible for post MY 2007 Defenders) or you fit our rear door spare wheel carrier. It takes off the complete weight from the rear door and opens along with the door. The carrier is fitted to the rear crossmember, a plate is mounted to the existing holes in the door, which is then attached to the carrier with two cranked stainless steel pivots. This carrier has been tested extensively, among others on the "Grand Erg" rallye and combines easy fitting with high toughness and exeptional usability. Available for all Defender models with rear door (Station and Hardtop). Improved design in 2014 and full stainless steel fabrication. The bearing is maintenance free, the complete carrier rustproof and can be completely revised it necessary. It's compatible with Land Rover rear step / bumper with towbar. Fitting is possible on a DIY basis. We also offer fitting service. If you also 'buy' the fitting charge we will contact you for an appointment. The spare wheel carrier opens together with the rear door, no further unlocking necessary. For vehicles with a tailgate (Pickup, not HCPU) we offer a separate sparewheel carrier: NARRTDEF-STPU The carrier is fully made out of stainless steel and black powder coated. The spare wheel carrier is designed and tested for a total weight (spare wheel and possibly other accessories) of 120 kg.