Das könnte Sie auch interessieren
Wheel spacer TREKFINDER for JEEP® Wrangler JK +60 millimetres per axle ( 30 mm per disc/ side ) black anodised Suitable for the following models/ Wrangler models: Model Jeep Wrangler/ Jeep Wrangler Unlimited Type JK EG-TG-No. e4*2001/116*0116* Details: Made of high-strength aluminium alloy Black hard anodised with 60 mm wheel spacer per axle (30 mm per side) DRM system (washers with pressed-in bolts are slid over the existing vehicle studs and screwed tight) Use with steel rims is prohibited incl. fastening material (10 cone collar nuts) incl. TÜV® parts certificate Price and scope of delivery is for one axle The spacer rings may only be fitted in conjunction with standard LM wheels and in combination with the cone collar nuts supplied. The spacer rings are not permitted in conjunction with steel wheels. The screw-in length of all fastening elements must be at least 6.5 turns. Ensure that the stud bolts are of sufficient length. The notes in the assembly instructions for the spacer rings must be observed. The installation of spacer rings is not permitted if the diameter of the spacer rings is smaller than the diameter of the wheel contact surface. A modification approval by TÜV, DEKRA etc. is required. However, the entry in the vehicle documents can also only be made at the next appointment with the responsible registration authority. In the meantime, it is sufficient to carry the parts certificate and the confirmation of the modification approval. All fastening elements must be checked with a suitable torque spanner after approx. 100 km of driving. Compatibility or usability of specific snow chains cannot be guaranteed. PLEASE NOTE: Only in conjunction with LM wheels with corresponding GIESSTASCHEN = standard stud bolts or nut heads protruding beyond the wheel surface may sink.The standard stud bolts may have to be shortened.The minimum screw-in length of all fastening elements of 6.5 turns must be maintained.
Prices incl. VAT;
NOLDEN LED multifunction light Jeep Wrangler JK
€410.00
Prices incl. VAT; / Parcel shipping
Clear visibility for your Jeep Wrangler JK
For easy installation in the original bumper or compatible bumpers for the Jeep Wranlger JK, the new LED multifunction light from Nolden is suitable. It combines a daytime running light (DRL), fog lights and a position light / parking light in a compact 90mm housing. The mounting frame allows the installation in the Wrangler / Wrangler Unlimited (from model year 2007), the fog light is adjustable. The required control unit is integrated.
Technical data:
Dimensions: 90x63 mm
LED type: 1x Osram Ostar, 1x Osram Oslon
Voltage: 12 V / 24 V
Approval: ECE and SAE
Connector (fog light): H8 / H11
Connector (daytime running light and parking light): AMP Superseal
Colours: Chrome / Black
The price refers to a set with two headlights.
The headlights are available in black and chrome, please select the desired variant below.