Installation service for warm air ducts for ventilation plates for all models The installation of the warm air duct is carried out at the specified fixed price, regardless of the duration.   Please note: The price refers only to the installation flat rate, including the required plastic conduit. The ventilation plates must be purchased separately.   Depending on whether you want to conduct heat from an external mobile heating box into the interior of the vehicle or from the interior of the vehicle via a permanently installed auxiliary heating system into, for example, a roof tent, you can purchase the following items from us:   Ventilation plates for a wide range of vehicles can be found here. Waluflex warm air pipe End piece for Waluflex warm air hose Permanently installed auxiliary heaters can be found here. Mobile auxiliary heater boxes can be found here.   Please note that built-in wind deflectors may need to be removed when installing a warm air duct through a ventilation grille.   When ordering, please provide your telephone number so that we can arrange an appointment. Installation is only possible on site in Berg near Neumarkt (postcode: 92348).   If you order the flat rate together with the appropriate ventilation plate, the item can also be shipped. If you already have ventilation plates, we can perform the installation service by appointment.  

Roof liner set Colour: Light grey for Defender 110 - 1987 - 2016 - with Alpine window for Defender 90 - 1987 - 2016 - with Alpine window Say goodbye to sagging headliners: Our kits are made to replace sagging or worn fabric headliners and give your Defender's interior a much-needed facelift.Strong composite for durability: Made from a tough composite material with a textured finish, these kits offer greater durability and longevity than conventional headliners.Easy to clean surface: The wipe-clean surface of our headliner kits makes it easy to keep the interior clean and hygienic.Easy installation with existing clips: These headliner kits can be fitted using the existing clips in your vehicle, making installation quick and hassle-free.Perfect fit through moulding: Each headliner is precisely moulded to fit the contours of your Defender, giving it a professional and elegant look.Lightweight construction: Despite their rigidity and durability, our headliner kits are surprisingly lightweight, so they won't add unnecessary weight to your vehicle.  

Cargo net for the classic Defender The roof lining is the least utilised area in the interior of a car. Yet it's a great place to pack away light and flat items in particular - if you have one of our ingeniously practical cargo nets installed.The 102 x 76 cm net for the old Defender (up to 2016) can be stretched in different ways depending on the vehicle size or configuration. In the 110, for example, this means at the very rear above the load compartment or the third row of seats, or in the centre. As the net is always accessible from the front and rear, this practical storage space extension can even be accessed quickly from the driver or front passenger seat in hardtops, camper conversions and other two-seaters.Tightening the flexible cargo mesh in the roof liner is extremely easy with 14 straps and belt clamps. The supplied expanding rivets also enable the aforementioned customised positioning of the holder. A 10.5 m long elastic band can also be pulled in under the mesh in a zigzag shape. This results in an additional packing level in which light objects, blankets, jackets and much more can be kept within easy reach.The cargo net for the classic Defender is available in black, grey and coyote. Scope of delivery:  1x cargo net14x strap cramps28x fastening rivetsInfo: These are special rivets. These rivets mushroom particularly wide and are therefore particularly durable in plastic panelling. You can find our Cargo Net Expedition for the Land Rover Defender here

A-pillar grab handle The easy-to-fit, stylish A-pillar grab handle makes it easier to get in and out of Defender. The handles are made from anodised aluminium. Available in black or silver Scope of delivery: 1 piece grab rail, fixing material.

Double DIN panel for Land Rover Defender Instead of installing many individual devices in the vehicle's cockpit, it often makes sense to install a single, central device - this saves space, labour, wiring and reduces the risk of theft. Modern multimedia devices now combine a variety of functions such as navigation, hands-free system, rear view camera and vehicle diagnostics and can also play a variety of media - in addition to the classic analogue AM/FM radio reception, digital radio DAB is becoming more and more widespread, DVDs can be played in addition to CDs, MP3 files from USB sticks or hard drives can be played and iPhones or iPods can be controlled. WLan access points and the integration of Internet services such as Facebook can also be realised. In the Defender TD4 (from 2007), there is no space for this ex works. The double DIN installation kit offered here creates this space by relocating the switches to the sloping area between the centre console and the steering wheel, facing the driver. Furthermore, it provides space for the installation of any 52mm round instrument - e.g. an exhaust gas temperature or outside temperature display. This installation space can also be closed off by means of a dummy plug supplied. The panel is available in matt or glossy finish. We will be happy to advise you on the installation of your desired unit. We recommend multimedia devices from brand manufacturers such as Kenwood, Alpine or Pioneer. You can also have the double DIN panel installed in our workshop, including the switch and the multimedia device you brought with you (installation only possible up to 7" display).

Galvanised doors for Land Rover Defender from model year 1983-2016 in Land Rover Series Style Give your Land Rover Defender an upgrade that combines style, robustness and durability in equal measure! With our galvanised doors in the iconic Land Rover series style, you can transform your Defender from 1983 to 2016 not only visually, but also functionally. The advantage of galvanising - your protection against rust: You know the problem: rust is the arch enemy of every Defender. Our doors put an end to this problem! Thanks to the high-quality hot-dip galvanisation of the frames and internal components, these doors are extremely resistant to corrosion and moisture. That means for you: Less worries about rust, more enjoyment of your vehicle - for many years to come. Style series: classic look meets modern benefits: These two-part doors in retro design are a real statement. The special feature: The upper door section with sliding window is removable - ideal for all soft-top variants or simply to be even closer to nature when travelling off-road. The pre-assembled, pre-glazed upper sections come complete with all seals and running rails, so you can get started straight away. Sophisticated design for maximum performance: No hassle with window regulators: The simple sliding windows do not require vulnerable cranks, which prevents jamming or catching. More security: The improved lock design of the handles is much more stable and tamper-proof, which increases the security of your Defender. Slim & practical: The absence of massive interior panelling gives you valuable legroom, and the slimmer door (without protruding handles) is a clear advantage off-road. Ready for your colour: The doors can be painted directly in the colour of your car to perfectly match your individual look. Our galvanised doors are not only more durable and robust than conventional doors, but also a more cost-effective alternative to current push-button doors. They are manufactured to the highest quality standards and guarantee an excellent fit. The scope of delivery includes everything you need for the conversion: two fully glazed upper door sections, hot-dip galvanised cappings, hot-dip galvanised lower door sections, handle units, locking devices for the sliding windows, locking cylinders with keys as well as lock latches and seals. Detailed description: What are the advantages of the two-part doors compared to the original doors? In addition to the significantly lower price for the series-style doors, it is primarily the design and construction. Instead of the push-button handles on the standard doors, there are recessed lever handles as on the rear. Due to their design, these handles are significantly more resistant to break-ins because they are fitted with a stronger latch mechanism. They also do not protrude, which can make all the difference when driving off-road or through narrow passages. The retro doors also save space in the interior, which will be appreciated by any tall driver who otherwise has to make do with seat rails and small steering wheels. The window section with sliding panes made of high-quality glass is completely removable, which is particularly attractive for soft-top owners. What's more, you never have to worry about the window lifting mechanism again. No compromises are made in terms of quality and installation with these installation kits. The frames of the doors and window sections are hot-dip galvanised and the sheet metal corresponds to the factory specifications of the original parts. The two-piece retro doors fit all Defender models from 90 to 130 from 1983 to 2016 and are supplied with all the necessary fixings, handles, locks, strikers and seals. They are designed so that standard door functions such as alarm system contacts and automatic interior light switch-on continue to work. Two holes only need to be drilled in the door frame for the strikers, as these are located in a different position on the door frame due to the design. A drilling template is included. The series-style conversion kits can be ordered in pairs for the front and/or rear. Upgrade your Land Rover Defender with these indestructible and stylish doors and be ready for any adventure - with Nakatanenga!

The new Defender combines modern technology with proven off-road capability. Good air circulation as if the windows were slightly open, but without the risk of rainwater or theft? Plus effective protection against insects? That's what our ventilation panels with mosquito nets offer, made to fit the New Defender perfectly from high-quality aluminum—no wobbly universal parts. Supplied in pairs and powder-coated in black, they complement the modern design discreetly and sensibly, especially when camping or on expeditions. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with the ventilation panels in place. Suitable for Defenders built from 2020 onwards. Length: 550 mm