Nakatanenga spare wheel carrier Defender SW/HT
€1,069.00
Prices incl. VAT; / Parcel shipping
Description
This full stainless steel spare wheel carrier for Defender SW/HT is the successor to our Defender spare wheel carrier RRHNAHI sold by the hundreds. It is available in two colours.
The Defender rear door suffers from the heavy weight of the large spare wheel. Depending on use, after about five years or 50.000 kms the first cracks in the rear door frame appear. There are two solutions for this well-known problem: either move the spare wheel to the bonnet (see our bonnet spare wheel mount for that, not possible for post MY 2007 Defenders) or you fit our rear door spare wheel carrier. It takes off the complete weight from the rear door and opens along with the door. The carrier is fitted to the rear crossmember, a plate is mounted to the existing holes in the door, which is then attached to the carrier with two cranked stainless steel pivots.
This carrier has been tested extensively, among others on the "Grand Erg" rallye and combines easy fitting with high toughness and exeptional usability. Available for all Defender models with rear door (Station and Hardtop). Improved design in 2014 and full stainless steel fabrication. The bearing is maintenance free, the complete carrier rustproof and can be completely revised it necessary. It's compatible with Land Rover rear step / bumper with towbar.
Fitting is possible on a DIY basis. We also offer fitting service. If you also 'buy' the fitting charge we will contact you for an appointment.
The spare wheel carrier opens together with the rear door, no further unlocking necessary.
For vehicles with a tailgate (Pickup, not HCPU) we offer a separate sparewheel carrier: NARRTDEF-STPU
The carrier is fully made out of stainless steel and black powder coated.
The spare wheel carrier is designed and tested for a total weight (spare wheel and possibly other accessories) of 120 kg.
This full stainless steel spare wheel carrier for Defender SW/HT is the successor to our Defender spare wheel carrier RRHNAHI sold by the hundreds. It is available in two colours.
The Defender rear door suffers from the heavy weight of the large spare wheel. Depending on use, after about five years or 50.000 kms the first cracks in the rear door frame appear. There are two solutions for this well-known problem: either move the spare wheel to the bonnet (see our bonnet spare wheel mount for that, not possible for post MY 2007 Defenders) or you fit our rear door spare wheel carrier. It takes off the complete weight from the rear door and opens along with the door. The carrier is fitted to the rear crossmember, a plate is mounted to the existing holes in the door, which is then attached to the carrier with two cranked stainless steel pivots.
This carrier has been tested extensively, among others on the "Grand Erg" rallye and combines easy fitting with high toughness and exeptional usability. Available for all Defender models with rear door (Station and Hardtop). Improved design in 2014 and full stainless steel fabrication. The bearing is maintenance free, the complete carrier rustproof and can be completely revised it necessary. It's compatible with Land Rover rear step / bumper with towbar.
Fitting is possible on a DIY basis. We also offer fitting service. If you also 'buy' the fitting charge we will contact you for an appointment.
The spare wheel carrier opens together with the rear door, no further unlocking necessary.
For vehicles with a tailgate (Pickup, not HCPU) we offer a separate sparewheel carrier: NARRTDEF-STPU
The carrier is fully made out of stainless steel and black powder coated.
The spare wheel carrier is designed and tested for a total weight (spare wheel and possibly other accessories) of 120 kg.
Customers also bought
Professionelle Montage für Reserveradträger Montagepauschale für den Hecktür-Reserveradträger NARRTDEF-02 in unserem Hause. Der Einbau erfolgt zum angegebenen Fixpreis, unabhängig von der Dauer. Bitte beachten: Der Preis bezieht sich nur auf die Montagepauschale, die zu montierende Ware ist separat zu erwerben. Bitte geben Sie bei der Bestellung Ihre Telefonnummer für die notwendige Terminabsprache mit an. Die Montage ist nur vor Ort in Berg bei Neumarkt (Postleitzahl: 92348) möglich. Hinweis zur Montagepauschale: Die angegebene Montagepauschale gilt ausschließlich für Standardfahrzeuge ohne zusätzliches Zubehör oder Sonderumbauten. Bitte beachten Sie, dass bei Fahrzeugen mit zusätzlichen Einbauten – wie beispielsweise Zusatztanks, Sonderverkleidungen oder anderen Komponenten, die vor der Montage demontiert oder entleert werden müssen – ein erhöhter Montageaufwand entsteht. In solchen Fällen kann die Montagepauschale abweichen. Sollte bei Ihrem Fahrzeug zusätzlicher Aufwand erforderlich sein, informieren wir Sie selbstverständlich vor Beginn der Arbeiten über mögliche Mehrkosten.
Prices incl. VAT;
Reliable support for your vehicle door Rear Door Damper for Land Rover Defender 90/110, fitted to the TOP of the rear door. Conversion kit, comes with stainless fittings, only for vehicles with rear door, suitable for all model years. The rear TOP door damper replaces the standard door arrester with a special gas strut with soft-stop function that keeps the door secuerly opened. The damper also works when fitted alongside our rear crossmember spare wheel carrier.
Prices incl. VAT;
Universal storage space set for the spare wheel The high school of storage space optimization really only begins when all the obvious places like the interior or trunk or the roof have long since ceased to offer anything. With our practical and universally applicable spare wheel tray, even the fifth wheel on the car becomes an equipment carrier. The practical storage solution for the spare wheel at the rear consists of two components that can be ordered individually (here in the store) or as a set. The base carrier with the tensioning strap is adjustable and thus fits all common off-road tire sizes. If one mounts only the basic carrier (sideways), so e.g. starting aids, wheel chocks and other accessories can be screwed to the carrier or attached with straps. If you want to mount the tray, i.e. the basket, the base carrier must be on top of the wheel. The loading area of the storage basket is a generous 80cm x 38cm, so that even larger equipment can find its place here. If this area is not enough, you can also turn the platform around and attach with the edge down. Raised edges and circumferential lashing holes ensure problem-free load security. Base carrier and storage basket are black powder-coated, so that the look of the spare wheel tray harmonizes perfectly with any off-roader. Base carrier: approx. W 38.8cm x D 20cm x H 15.5cmLoading area: approx. W 80cm x D 38cm x H 5cm Note: Distribute the load centrally or evenly on the platform. Pay attention to the condition of your door hinges when loading the platform! It is extremely important to secure the strap as tightly as possible in a locked position so you do not lose your equipment. We are NOT responsible for the use or misuse of the racks and damaged vehicles or lost items due to improper assembly and inspection of the load prior to travel.
Prices incl. VAT;
Land Rover rear bumper / trailer hitch / rear step for Defender 110 With E-mark, for mounting a ball head, E-set and ball head not included, compatible with Nakatanenga spare wheel carrier. Suitable for Land Rover Defender 110 from MY 1998-2016 (TD5 and TD4)
Prices incl. VAT;
Land Rover rear bumper / tow bar / rear step for Defender 90 Rear bumper, for Land Rover Defender 90, with E-mark, for mounting a ball head, E-set and ball head not included, compatible with Nakatanenga spare wheel carrier. Suitable for Land Rover Defender 90 from MY 1998-2016 (TD5 and TD4)
Prices incl. VAT;
Spare wheel holder with checker plate for bonnet on Land Rover Defender, black powder coated A reinforcement plate is only required for the TD5 and is only supplied there.
Prices incl. VAT;
Spare wheel holder Land Rover Defender, anodised aluminium Spare wheel holder for the bonnet of Land Rover Defender Td5 and Tdi, aluminium riffle, for TD5 with reinforcement plate inside, anodised incl. fixing material as well as holding plate with three bolts made of stainless steel.The reinforcement plate is only required for the TD5 and is only supplied there.
Prices incl. VAT;