JackAll Highlift Jack - 60 Inch / 152cm

86-piece repair kit for tyres A must not only for road trip adventures and off-road expeditions: The 86-piece repair and spare parts kit for tubeless tyres is a perfect puncture repair kit for on the road and - with restrictions* - also a solid basis for tyre repairs of all kinds in your own garage. Punctures can be permanently sealed with the included tools, rubber strips, patches and vulcanising paste. Even valve damage is no longer a problem thanks to the extensive selection of spare parts. This is a cheap and quick alternative to a tyre service, especially for permanently stressed off-road tyres. *Due to §36 StVZO and the guideline for the repair of pneumatic tyres VkBl.2001, we would like to point out that permanent repairs may only be carried out by specialist companies after the dismantled tyre has been inspected and in accordance with the manufacturer's specifications.

Release valves for tyre pressure Tyre deflator valves allow for fast and easy lowing of tyre pressure to suit different terrains. These tyre deflators can be used for pressures from 0.5 bar. Price is for set of 4. Setting up the deflators is very easy. All you have to do is create the desired lower pressure in one tire and then adjust the deflators in pairs or all four, as needed. No tools required. The adjustable range is between 0.5 and 3.5 bar. Step by Step Guide: Create the desired lower target pressure (e.g. for off-roading) in a tire and check with pressure gauge. Set the deflator target pressure BEFORE applying it to deflate tires. Simply turn both the lock ring and the adjustment cap all the way down. Now the deflator is completely closed. Screw the deflator onto the valve stem of the tire with the lowered target pressure. Open up the deflator slowly by turning the adjustment cap upwards until you hear the air escaping. With the first hiss, turn the cap slightly back down until the airflow stops. Now you have set the deflator to the desired target pressure and you can turn the lock ring back up to fasten the adjustment cap. Make sure you don’t move the cap inadvertently. Tighten lock ring and cap against each other by hand. Repeat with other deflators in pairs or for all four, as needed. The deflators are ready for use now. Simply screw them onto the tire valves and wait until the air stops flowing. Deflating takes, depending on the settings, usually a few minutes.

FOR AN EMERGENCY IN THE TERRAIN! It is quite annoying and very time-consuming when a tire valve is broken in the middle of the terrain.If it does happen, then we have the solution here:The extremely stable emergency valve from Colby Valve! This is inserted from the outside into the valve opening and fixed by a thumbscrew. The exchange is fast, uncomplicated and above all WITHOUT tools! You only need a few minutes because disassembly of the tire is not necessary. Basic information: 2 pack Installation from the outside no tools needed 20x more stable than conventional valves very good quality Should the wing nut disturb, then there is alternatively still the "Colby Valve Ultimate". This valve is much smaller, but can only be mounted with a tool. ATTENTION!Only for off-road use! Valve is not allowed in the area of StVo (German traffic regulations)

FOR AN EMERGENCY IN THE TERRAIN! It is quite annoying and very time-consuming when a tire valve is broken in the middle of the terrain.If it does happen, then we have the solution here: The extremely stable emergency valve from Colby Valve! The exchange is quick and uncomplicated. You only need a few minutes because disassembly of the tire is not necessary. The valve can be plugged into the valve opening from outside even in tight spaces. The Ultimate System is far smaller than the "Emergency System". The installation succeeds only with tools. Basic information: 2 pack Installation from the outside 20x more stable than conventional valves very good quality Color: Black ATTENTION!Only for off-road use! Valve is not allowed in the area of StVo (German traffic regulations)

Hi-Lift / JackAll Adapter for Land Rover Defender – Secure Hold for Heavy-Duty Tasks When the going gets tough off-road or maintenance work is due on your Land Rover Defender, a reliable jack like the Hi-Lift or JackAll is worth its weight in gold. However, to transfer its power safely and gently to the vehicle, the right adapter is required. The Nakatanenga Hi-Lift / JackAll Adapter has been specially developed for the original jacking points on the Land Rover Defender (90/110/130) and ensures safe and stable lifting of your vehicle. This robust adapter is simply attached to the lifting jaw of your Hi-Lift, JackAll, or a similarly constructed farm jack and inserted with a precise fit into the designated jacking points in the chassis or on appropriately equipped bumpers and sill protection tubes of your Defender. This effectively prevents the jack from slipping and minimises the risk of damage to the vehicle. Manufactured for demanding off-road use, this adapter impresses with its solid construction and durability – typical Nakatanenga quality. It is an indispensable accessory for every Defender owner who values maximum safety and efficiency when using their farm jack. The Advantages at a Glance: Safe Lifting: Provides a stable and secure connection between the jack and the vehicle. Perfect Fit for Defender: Designed for the original jacking points of the Land Rover Defender 90/110/130 as well as for many aftermarket bumpers and rock sliders with corresponding mounts. Protection for Your Vehicle: Reduces the risk of slipping and damage to the chassis or attachments. Robust Construction: Designed for tough off-road conditions and frequent use. Universally Applicable: Suitable for Hi-Lift, JackAll, Hilift, Jack-All, and similarly constructed farm jack models. Easy to Use: Quickly and easily attached to the jack and positioned on the vehicle. Technical Details : Material: High-strength steel Surface: Corrosion-resistant coating Scope of Delivery: 1x Hi-Lift / JackAll Adapter for Land Rover Defender Trust in proven Nakatanenga quality and equip your Land Rover Defender with this essential adapter for the safe use of your Hi-Lift or JackAll jack. Indispensable for every off-road tour and workshop. Note: The jack shown is not included in the scope of delivery.

Safe transport for JackAll weighing jacks The transport lock prevents the clacking and loosing of the grip of your Hi-Lift or Hi-Lift X-treme jack. It is also suitable for the various similarly built jack JackAll / HiJack / HiLift / Farm Jack / High Lift / HiLift / High Jack. The functionality is similar to the HiLift Handle Keeper. The illustrated jack is NOT included. Please select the desired color below. Please note:the color may differ slightly from the pictures.

Everything you need for maintenance: With the service kit, you can get your Jackall jack back into top shape - for reliable operation and maximum service life. Contains all the necessary wear parts for easy maintenance.

Protect the mechanics of your jack from contamination The protective cover is suitable for Hi-Lift X-treme jack, as well as for all similarly built jacks (JackAll / HiJack / HiLift / Farm Jack / High Lift / HiLift / High Jack). The highly water-repellent outdoor fabric is longitudinal and transverse elastic. The material is not only water-repellent but also extremely easy-care and quick-drying as well as washable at 30 ° CThe material is also used for outdoor clothing, sports, hiking and trekking clothing. Despite the elasticity of the shell is extremely resistant to abrasion. With the zipper we decided on a specially covered version, which prevents the zipper becoming dirty. The loop allows a practical hold when closing the shell. The closure does not have to be cumbersome hooked to the bottom, but can now be easily and conveniently closed from above. The big advantage, compared to the previous protective cover:The shell is higher The zipper is covered and hooked from the top. Material: 92% polyamide (nylon) / 8% spandexThe material is water repellent, quick drying, easy to clean and washable at 30 ° C Made in Germany!This item is made to high quality standards in our home tailor shop. ATTENTION:The cover covers the mechanics, not the whole jack!