Fitting Kit Headlight for Land Rover Defender, stainless steel

Stainless steel screw set for Land Rover Defender 90 SW / 90 HT / 90 Softtop Produced with ORIGINAL Land Rover heads EXCLUSIVELY for us. The screws' heads are identical to the original Defender screws!!! Fits all model years - TDi, TD5, TD4 2.4, TD4 2.2 Set comprises ca. 390 pieces. With this fixing set you can replace all fixings visible from the outside with high-quality V2A stainless steel fixings. The side and rear door screws as well as the body fixings at the rear are made especially for us and are identical in looks to the original fixings (Torx heads).In addition special bonnet rubber screws are supplied, too. The fixing sets are clearly arranged in 10 individual bags for ease of fitting: rear body hinges rear body fixings grille load bay strip and cat eyes bonnet hignes rear crossmember spare wheel carrier headlight surrounds and front wing covers side door hinges inner door sills and A post + 2 rubber screws + anti-seize paste Very easy, DIY fitting possible. We supply anti-seize paste for all screws. Please  note that this kit does not include stainless bolts for the bulkhead vent flaps (part nr. LKSB). Note: The screws for the door hinges may have to be shortened.The sets for the various sections contain more screws to cover different attachments. This means that screws may be left over under certain circumstances.

Door Hinge Bolt Set Stainless Steel for Land Rover Defender 110 SW/130CC NOW EXCLUSIVELY manufactured for us in ORIGINAL Land Rover form.The bolts have identical heads as the original bolts on the Defender!!!!Suitable for all years of construction - Tdi, Td5, Td4 2.4, Td4 2.2Complete set of screws for 4 doors and rear door, V2A stainless steel for Defender 110 SW/130CC, incl. Anti Seize Paste. Note: The screws for the door hinges may have to be shortened.

Stainless Steel Screw Set for Land Rover Defender 110 SW / 110 CC / 130 CC EXCLUSIVELY manufactured for us in ORIGINAL Land Rover style.The screw heads match the original Defender screws in shape and appearance! The complete set contains more than 440 parts. It allows the externally visible screws on the vehicle to be replaced with high-quality, corrosion-resistant V2A stainless steel screws. Especially on older Defenders, this gets rid of unsightly rusty screw heads while retaining the characteristic original appearance. Suitable for all model years – TDi, Td5, Td4 2.4 and Td4 2.2. A particular highlight: the screws for the side-door and rear-door hinges as well as the rear body mounting screws are manufactured specially for us and match the shape of the original Land Rover screws, including the Torx drive. Specially manufactured bonnet buffer screws are also included in the set. With more than 440 parts, organisation matters. That's why the screws are clearly sorted into 10 separate bags according to the relevant area of the vehicle. The set includes screws for the following areas: rear door hinges rear body mounting radiator grille load-area trim + reflectors bonnet hinges rear crossmember spare wheel carrier headlight surrounds + wing covers side door hinges inner door sills + A-pillar 2x bonnet buffer screws anti-seize paste Installation is generally straightforward and can also be carried out by competent DIY mechanics without specialist workshop equipment. The clearly sorted packaging makes it easy to identify which screws belong to which area of the vehicle. Anti-seize paste included:The set includes anti-seize paste for installation. When replacing such a large number of fasteners with stainless steel screws, this is simply part of a properly thought-out kit. Please note: This set does not include the stainless steel hinge bolts for the ventilation flaps (item no. LKSB). Depending on the vehicle and installation situation, the door hinge screws may need to be shortened. The individual sub-sets contain some additional screws to cover different vehicle versions and accessories. It is therefore possible that some screws will remain unused after installation.

Produced with ORIGINAL Land Rover heads EXCLUSIVELY for us The screws' heads are identical to the original Defender screws!!! Set comprises ca. 390 pieces. With this fixing set you can replace all fixings visible from the outside with high-quality V2A stainless steel fixings. The side and rear door screws as well as the body fixings at the rear are made especially for us and are identical in looks to the original fixings (Torx heads). In addition special bonnet rubber screws are supplied, too. The fixing sets are clearly arranged in 10 individual bags for ease of fitting: rear body hinges rear body fixings grille load bay strip and cat eyes bonnet hignes rear crossmember spare wheel carrier headlight surrounds and front wing covers side door hinges inner door sills and A post + 2 rubber screws + anti-seize paste Very easy, DIY fitting possible. We supply anti-seize paste for all screws. Please  note that this kit does not include stainless bolts for the bulkhead vent flaps (part nr. LKSB). Note: The screws for the door hinges may have to be shortened.The sets for the various sections contain more screws to cover different attachments. This means that screws may be left over under certain circumstances.

Screw set bonnet Land Rover Defender optionally for Tdi /Td5 and for Td4   Defender bonnet screw set includes 2 front bumper screws, six stainless steel hinge screws with washers and nuts and two plastic hinge bushes   The screws are supplied as hex socket screws. 

Not only for healights, but also for all other signal lights on the vehicle LED bulbs have many advantages, apart from low power consumption and high light output, there is above all superior longevity and vibration resitance that make these bulbs desirable for owners of off-road vehicles. The standard-set with 8 bulbs contains: 2x front indicatior ligths 2x front position lights, either with or without day-driving light 2x rear indicators 2x brake/rear lights adjustable indicator relay The set with 9 bulbs additionally (aditionally to the standard-set) contains:  1x tailgate break light The sets with 10 bulbs additionally (aditionally to the standard-set) contain:  → 1x fog light and 1x reverse light→ OR 2x wing side indicators The sets with 11 bulbs additionally (aditionally to the standard-set) contain:  → 1x fog light, 1x reverse light and 1x tailgate break light→ OR 2x wing side indicators The set with 12 bulbs additionally (aditionally to the standard-set) contains:→ 1x fog light and 1x reverse light and 2x wing side indicators The set with 13 bulbs additionally (aditionally to the standard-set) contains:→ 1x fog light and 1x reverse light, 2x wing side indicators and 1x tailgate break light With each kit you have the choice of orange or white bulbs for the indicators. Note that indicators must be orange by law. The fog light is always supplied in red. If the lamps on the existing vehicle are square at the rear, 1x AMR3850 mounting base is required per lamp in order to mount the new round rear fog lamp and reversing lamp. As a rule, the original drill holes can then be used. All bulbs come with E-approval so that they can be fitted without further TUV recording. All bulbs come with correct plugs for simple replacement for vehicles from MY 1998 (TD5 und TD4). Fittings are supplied, as is an adjustable indicator relay that even allows to adjust indicator speed. Older vehicles can be retrofitted after removing the plug. This requires soldering. There is no need for an external day-light driving control unit as this is already included in the position lights for day-light driving function. The wiring for day-light driving requires some straight-forward soldering - illustrated instructions are supplied. As required by law, the day-light driving light illuminates with running engine and switches off once low-beam is selected. This signal lights kit is the ideal addition to our 7" Bi-LED main headlights, the LED license plate light and any additional LED spotlights - this brings the Land Rover Defender into the 21st century light-wise! Signal lights (indicators, position lights with or without day-driving lights, brake lights, fog light and reverse light, wing side indicators) in LED technology for Land Rover Defender. E-marked, white or coloured, various sets available. Plug&play for LR plugs for TD4/TD5 (from MY1998). Please note: The screws must not be over tightened (only hand-tight!), Otherwise the plastic housing may crack. These cracks could allow water to penetrate into the generally watertight luminaires. Use only a screwdriver and NO cordless screwdriver!

Fitting Kit Headlight Land Rover Defender Fitting kit for one headlight for Land Rover Defender, consisting of screws and small parts.

Robust hold, elegant look: Bearlight stainless steel mounting rings (7") for Land Rover Defender Our specially made stainless steel headlight bezels once and for all end the dreaded rust problem of the original Defender mounting rims. Suitable for all halogen, clear glass, and LED main Defender headlights by producers like J.W.Speaker, BMAC, Hella, Nolden, Vision-X, Truck-Lite, Wipac, or Sirius. Price is for one pair. Also available in black powder coated - a perfect mix of understatement and technical state of the art! If you work on your lights, why not get the stainless fitting equipment, too.