Cable gland stainless steel type DD 10, 7-15mm The cable bushing offers optimum protection for cables with a diameter of 7-15 mm and is almost 100% watertight thanks to the cable gland. The base plate is made of stainless steel and has a flange diameter of 50 mm. The cable is pulled through the gland and thus effectively sealed. The delivery also includes a rubber seal, a sealing cap and three screws for fastening.

Power distribution box with fuse holder from BlueSea Compact size BlueSea blade fuse block and power distribution for either six or up to twelve seperately fused circuits for up to 30 Amps per electronic installation and currencies up to 32 volts. Fitting a variety of cars with 6 V up to 24 V supply systems. These fuse boxes also provide a common negative bus to minimize bad earth problems. New version offers two separate circuits, thus allowing e.g. 6 installation with permanent life feed and 6 with ignition life feed. This fuse box can be the starting point for well laid-out and safe vehicle electrics and should be fitted from early on when starting fitting additional appliances and electical installations. The box itself should be fused - not more than 30 cm away from the battery with a maximum of 125 A - for which we recommend our fuse carrier (up to 200 A) from the same supplier with the suitable 125 A MIDI strip fuse. Comes with: fuse box for either 6 or 12 circuits clear plastic cover with recessed placeholder for lables two slots for spare blade fuses no fuses supplied Technical details: Modell SHMA-6 SHMA-12 SHMA-6+6 number of circuits max. 6 max. 12 max. 6+6 placeholder for spare fuses 2 2 2 dimensions 125x85x39 mm 165x85x39 mm 165x85x39 mm weight 250 Gramm 350 Gramm 350 Gramm max. per circuit max. 30 A max. 30 A max. 30 A max. overall max. 100 A max. 100 A max. 100 A max. voltage max. 32 V max. 32 V max. 32 V Please choose number of circuits.

Vision-X Xmitter Prime Xtreme LED Worklight The American manufacturer Vision-X has launched new LED work lights with 5 W LED modules. Due to the more compact design of the modules, a significantly higher assembly density and thus an increased luminous range can be achieved with the same size of the lamp housing. In a proven design with a robust aluminium housing and scratch-resistant polycarbonate lens, the lights of the Xmitter Prime XP series are ideally suited for the tough demands of rally and touring vehicles, but also for the demands of professional applications such as forestry and emergency vehicles. All headlamps are available in 10° and 40° illumination, mixed configurations are possible on request at no extra charge (please simply contact us by e-mail), as are white housings for marine applications. Water resistance to IP68 standard, improved thermal design, a voltage range of 10-42 V and dimmability via pulse width modulation round off the product features. Article number     Number of LEDs     Lumen       Illumination         Dimensions          Power consumption NAXIL-PX-6xx           6                             2,958 lm      10°/40°              119x95x84 mm         2.5 A / 12 VNAXIL-PX-12xx        12                            5,916 lm      10°/40°               201x95x84 mm        5.0 A / 12 VNAXIL-PX-18xx        18                            8,874 lm      10°/40°               282x95x84 mm        7.5 A / 12 VNAXIL-PX-30xx        30                           14,790 lm     10°/40°               445x95x84 mm       12.5 A / 12 VNAXIL-PX-36xx        36                           17,748 lm     10°/40°               524x95x84 mm       15.0 A / 12 VNAXIL-PX-54xx        54                           26,622 lm     10°/40°               768x95x84 mm       22.5 A / 12 VNAXIL-PX-72xx        72                           35,496 lm     10°/40°              1011x95x84 mm       30.0 A / 12 VNAXIL-PX-78xx        78                           38,454 lm     10°/40°             1093x95x84 mm        32.5 A / 12 VNAXIL-PX-90xx        90                           44,370 lm     10°/40°             1254x95x84 mm        37.5 A / 12 VThe headlamps under item number "NAXIL-PX-1210" have an E-approval mark.End cap mountings are optionally available.