Winch incl. winch window, plastic rope and winch hook The strongest and fastest winch in this design. With its low weight and compact dimensions, it is perfect for vehicles with a total weight of up to 6 tons. In contrast to its predecessor, this model has a gear brake instead of a drum brake. The gear brake does not wear out compared to the drum brake and loses no braking effect when used for a long time. With the 2-speed gearbox, the winch manages almost 50m / minute! Furnishing: 2-speed gearbox with high-speed gear Remote control 1x cable 1x radio integrated (delivered without battery) Potted reinforced relay (contactor) waterproof stable powder-coated contactor housing made of deep-drawn sheet metal Motor & gearbox IP67 sealed by groove with sealing ring removable control unit (so that the control can be installed as desired) Freewheel lever * Gearbox neutral - 1st gear - 2nd gear Cross struts and equipment made of stainless steel reinforced rope drum ** (suitable for use with plastic ropes) powder-coated aluminum die-cast housing motor / gearbox transmission brake Cable length: 1.6 m Cable cross-section: 35 mm² 3 year guarantee operation manual * A freewheel lever is used to decouple the gearbox and to unwind the winch quickly by hand. ** Plastic cables load the cable drums laterally by far more than steel cables Technical specifications: Working range voltage: 10-16 Volt Max. Power consumption 500 Am ** Train speed without load 15/41 m / minute Traction 5,400 kg ** 3-stage planetary gear 267/86: 1 geared down Net weight: 32 kg without rope and rope window 5.4 KW Series Wound Motor * Drum (ØxLength): 63x223 mm Overall size (LxWxH): 637 x 160 x 254 mm * Series motor with electrically generated magnetic field, power = with a standard 70 AH battery ** Values ​​can vary considerably, depending on the battery system, the winch can pull up to twice, the traction is designed for a standard 70 AH battery. With more powerful battery systems, the pulling power must be limited by the current / voltage. Material:The cable winch is made of aluminum and high-strength stainless steel. High strength so that the steel can withstand the loads. This steel can also oxidize, i.e. if the parts are exposed to salt in winter, you should care for them every now and then and let them in with a thin oil film. We have to do that maintenance instructions are provided in the download area. The pulling force of the winch is highest on the first or lowest rope layer on the drum. Similar to a bicycle gear shift. The less rope there is on the drum, the slower the winch pulls and the more power it has. first gear low speed second gear high speedRope pull speed Speed ​​Rope pull speed1 5,440 9 m / min 1 870 25 m / min2 4,340 11 m / min 2 694 30 m / min3 3,605 13 m / min 3 676 35 m / min4 3,080 15 m / min 4 490 41 m / min Scope of delivery:1 x winch1 x winch rope - optionally in orange or gray1 x winch window1 x winch hook

Nakatanenga Winch Bumper 2 for Land Rover Defender The new Nakatanenga NAWIBU2 winch bumper is equally suitable for Land Rover Defender 90/110/130 with or without air conditioning. It fits all model years and engine types, such as Td4, Td5, Tdi, Tdci, Puma, 2.5, 2.4 and 2.2. Locally manufactured for us, the winch bumper is powder-coated black and protects the front of the vehicle even during tough off-road use. The two integrated, swivelling recovery eyes are ideally suited for self and external recovery - or for attaching an optional pulley, which doubles the pulling force of the winch or makes difficult recoveries possible in the first place. The design of the winch bumper allows for easy registration by means of a fee-based individual approval. One of the main innovations of the NAWIBU2 bumper compared to its predecessor is the optional possibility to mount two 70mm driving lamps in a recessed position - this way they are optimally protected against damage in the terrain. We use LED driving lights from Nolden, which provide excellent light with low power consumption. They have an E-mark and can therefore be used without registration. In order to harmonise with any existing Nolden Bi-LED main headlights, the auxiliary driving lamps are available in black or chrome-coloured optics. If you order the bumper without headlights, the openings for headlights are not present. Depending on the vehicle version and winch type, it may be necessary to adapt the radiator grille. The UNIVERSAL version is suitable for most winches (except Warn 8274, various Ramsey etc.) - here the common winches from Warn, Tabor, Superwinch Talon, Supwinch Tigershark, Bearwinch etc. fit. Delivery includes stainless steel recovery eyes and stainless steel shackles. Please also note our winch bundles with price advantage! Please select below whether and if so in which colour you would like the Nolden 70 mm LED driving lights as well as which winch type you are using: Note: The bumper is not suitable for the Superwinch EXP model series and the WARN Zeon model series and VR EVO