Ähnliche Artikel
Silencer / Spacer f. height compensation (P38 or Salisbury axle) Description: the item can be used on the rear axle on 110s and 130s. optimal possibility for level compensation/ the height adjustment is 10 millimetres the ring consists of a zinc, phosphated metal ring with coil spring centring and vulcanised NR/ SBR rubber the rubberised surface of the ring reduces the transmission of vibration noise the washer is placed between the spring end and the spring plate, max. one washer per spring end is possible, i.e. max. two washers per spring, i.e. max. 20 mm height increase per spring is possible price per unit
Prices incl. VAT;
Detroit Truetrac - Limited Slip Rear Locker, Land Rover Salisbury 24 spline rear axle The Detroit Truetrac was the first helical gear differential ever introduced into the automotive aftermarket as an Eaton brand. It remains the leading helical gear-type limited slip differential in the industry. Detroit Truetrac's proven helical gear design eliminates the need for wearable parts, resulting in maintenance free traction. Recognised not only for its toughness but also it’s smooth and quiet operation. Engineered to work efficiently in front and rear axles, semi-floating (C-clip axles) and transfer cases. Power transfer is so smooth, it literally goes unnoticed by the driver - even in front wheel drive axles. There is no need to use special oils or additives, no mechanical activation, no drilling of the diff housing. Proven design, low cost and effective performance, all make the Detroit Truetrac limited slip differential the ideal choice for a wide variety of vehicle applications. No maintenance - Just Traction! 1 unit 2.5 litres of differential gear oil and two bearings are needed for fitting.
Prices incl. VAT;
Detroit Truetrac - Limited Slip Front Locker, Rover 24 Splines front axle The Detroit Truetrac was the first helical gear differential ever introduced into the automotive aftermarket as an Eaton brand. It remains the leading helical gear-type limited slip differential in the industry. Detroit Truetrac's proven helical gear design eliminates the need for wearable parts, resulting in maintenance free traction. Recognised not only for its toughness but also it’s smooth and quiet operation. Engineered to work efficiently in front and rear axles, semi-floating (C-clip axles) and transfer cases. Power transfer is so smooth, it literally goes unnoticed by the driver - even in front wheel drive axles. There is no need to use special oils or additives, no mechanical activation, no drilling of the diff housing. Proven design, low cost and effective performance, all make the Detroit Truetrac limited slip differential the ideal choice for a wide variety of vehicle applications. No maintenance - Just Traction! 1 unit 2.5 litres of differential gear oil and two bearings are needed for fitting.
Prices incl. VAT;
Detroit Truetrac - Limited Slip Rear Locker Detroit Truetrac - Limited Slip Rear Locker, Land Rover Defender with Rover 24 spline axle. The Detroit Truetrac was the first helical gear differential ever introduced into the automotive aftermarket as an Eaton brand. It remains the leading helical gear-type limited slip differential in the industry. Detroit Truetrac's proven helical gear design eliminates the need for wearable parts, resulting in maintenance free traction. Recognised not only for its toughness but also it’s smooth and quiet operation. Engineered to work efficiently in front and rear axles, semi-floating (C-clip axles) and transfer cases. Power transfer is so smooth, it literally goes unnoticed by the driver - even in front wheel drive axles. There is no need to use special oils or additives, no mechanical activation, no drilling of the diff housing. Proven design, low cost and effective performance, all make the Detroit Truetrac limited slip differential the ideal choice for a wide variety of vehicle applications. No maintenance - Just Traction! 1 unit 2.5 litres of differential gear oil and two bearings are needed for fitting.
Prices incl. VAT;
Detroit Truetrac - Limited Slip Rear Locker Detroit Truetrac - Limited Slip Rear Locker, Land Rover P38 axle. The Detroit Truetrac was the first helical gear differential ever introduced into the automotive aftermarket as an Eaton brand. It remains the leading helical gear-type limited slip differential in the industry. Detroit Truetrac's proven helical gear design eliminates the need for wearable parts, resulting in maintenance free traction. Recognised not only for its toughness but also it’s smooth and quiet operation. Engineered to work efficiently in front and rear axles, semi-floating (C-clip axles) and transfer cases. Power transfer is so smooth, it literally goes unnoticed by the driver - even in front wheel drive axles. There is no need to use special oils or additives, no mechanical activation, no drilling of the diff housing. Proven design, low cost and effective performance, all make the Detroit Truetrac limited slip differential the ideal choice for a wide variety of vehicle applications. No maintenance - Just Traction! 1 unit 2.5 litres of differential gear oil and two bearings are needed for fitting.
Prices incl. VAT;
Das könnte Sie auch interessieren
4x Brake Pads - LOF Brake Pad and Mounting Kit POWERspec brake pads: LOF POWERspec brake pads are designed for tuned and modified hard working axles.High braking power, improved coefficient of friction (0.57). Designed for fast road use to stop heavily loaded vehicles, including tractors.POWERspec brake pads have edge chamfers that reduce noise but do not reduce service life, uncoated, minimal scattering required. The pads have a noise reducing washer on the back of the pad. Notes on Defender brake parts: All brake pads offered for the Defender have an R90 designation and are therefore registration-free.Brake discs are also registration-free, as only vehicles homologated from 2016 onwards require brake discs with an R90 designation. 1. LOF brake pad mounting kit for : Defender 90/110/130 front axle (MY1994-2016) What is included in the kit? 4x LOF 50V brake pads (ROAD/POWER) 1x STC8575 installation kit 1x LOF Ceratec brake grease 2. LOF brake pad installation kit for : Defender 110/130 rear axle (MY 1998-2016) What is included in the kit? 4x LOF 110 brake pads (ROAD/POWER) 1x 4105 mounting kit 1x LOF Ceratec brake grease 3. LOF brake pad mounting kit for : Defender 90 rear axle (MY 1994-2016) What is included in the kit? 4x LOF 90 brake pads (ROAD/POWER) 1x STC8574 mounting kit 1x LOF Ceratec brake grease
Prices incl. VAT;
LOF Brake Shoe - Complete Axle Set Description:A set of 4 brake shoes to overhaul 1 complete axle on a 10" / 11" Series IIA / Series III Land Rover.The shape and precision of the brake shoes match the drums, with a brake compound designed to combat squeaking and judder! All stock owners will know what is meant! Also, the shoes have been fitted with a solid, correctly shaped post rivet to hold the spring in place, you will know that cheaper brands have a straight cut rivet that tends to fall out! Notes on Defender brake parts:all brake pads offered for the Defender have an R90 designation and are therefore registration free.Brake discs are also registration-free, as only vehicles homologated from 2016 onwards require brake discs with R90 identification.
Prices incl. VAT;
Series IIA & III, 10" Front Brake (1971-81) / Rear Brake (1971-85) LOF Series IIA & III 10" front brake drum set from LOF Brakes.LOF wants to make everything better, and let's face it, the stock brake drums currently on the market are terrible, so they set out to make the best! Description: Series IIA & III, 11" front brake kit (4 cylinder to 83) from LOF Brakes.2 important things have been corrected in the kit:Drum runout accuracy - LOF has managed to produce the 11" drums to a maximum tolerance of 40 microns runout and 50 microns out of roundness, which is tighter than any other brake drum manufacturer.The shape and precision of the brake shoes are matched to the drums and the brake compound is designed to prevent squeaking and juddering! All vehicle owners will know what is meant! They have also fitted the brake shoes with a solid, correctly shaped post rivet to hold the spring in place. You will know that cheaper brands have a straight cut rivet that tends to fall out! Notes on Defender brake parts: all brake pads offered for the Defender have an R90 designation and are therefore registration free.Brake discs are also registration-free, as only vehicles homologated from 2016 onwards require brake discs that have an R90 designation. So what is included in the kit? Series IIA & III, 10" front brake (1971-81) 2x LOF 10" (SIII) drums 4x LOF 10" series brake shoes 1x LH Delphi brake cylinder part 243296 1x RH Delphi brake cylinder part 243297 6x barrel retaining screw part 1510 2x Shoe spring core 503981 2x shoe spring core 218983 1x RTC3176 adjuster kit 1x LOF Ceratec brake grease Series IIA & III, 10" REAR WHEEL BRAKE (1971-85) 2x LOF 10" drums 4x LOF 10" series brake shoes 1x LH Delphi brake cylinder part 243303 1x RH Delphi brake cylinder part 243302 6x drum retaining screw part 1510 2x shoe spring core 503981 2x Shoe spring core 218983 1x RTC3176 adjuster kit 1x LOF Ceratec brake grease
Prices incl. VAT;
Strong, precise, durable – LOF POWERspec brakes for Defender 90/110/130 is designed for heavily loaded Land Rovers, the discs and pads are of an "OEM" specification and are manufactured to the same quality and tolerances as genuine Land Rover brake components. POWERspec kits come complete with fitting kit, including fasteners, pins, anti-rattle washers and the correct grease if required!Discs: Dimpled and grooved, with black phosphate finish for corrosion resistance and removal of dirt and heat.Linings: Organic/ceramic friction material.This brake kit fits all Defender 90/110/130 front axles with vented discs (only early 90" or low 90" may have solid front axles). Notes on Defender brake parts:all offered brake pads for the Defender have a R90 marking and are therefore registration freeBrake discs are also registration free, as only vehicles homologated from 2016 onwards require brake discs that have an R90 designation. POWERspec pads:LOF POWERspec brake pads have been developed for tuned and modified hard working axles.High braking efficiency, Improved coefficient of friction (0.47) Designed for fast road use to stop heavily loaded vehicles, including towing vehicles. POWERspec pads have edge chamfers that reduce noise, pads are uncoated, minimal bedding required. Pads have a noise reducing washer on the back of the pad. Description: 90/110/130 front ventilated brake discs, pads and fitting kit. What is included in the POWERspec kit? Front axle (MY 1994-2016): 2x LOF PWD-50V POWERspec discs, blackened, studded and grooved. 4x LOF PPP-50 Performance POWERspec brake pads Rear axle 110/130 (MY 1998-2016): 2x LOF PWD-110S POWERspec solid discs, blackened, nubbed and grooved. 4x LOF PPP-110 Performance POWERspec brake pads Rear axle 90 (MY 1994-2016) 2x LOF PWD-90S POWERspec discs, blackened, dimpled and grooved 4x LOF PPP-90 Performance POWERspec pads Included with all 3 brake kits are these items: 1x RTC5001 quality mounting kit 1x bag LOF Ceratech grease 4x Brake caliper mounting bolts FTC3375 2x Hub seal FTC4785 2x Lock washer FTC3179 2x Lock nut RFD100000 2x Drive flange gasket 571752
Prices incl. VAT;
LT230ATB installation kit required for the Ashcroft LT230 ATB The kit contains: Collapsible spacer Nut for the intermediate bolt Centre diff nut 2 x O-rings 2 x Timken bearings 8 x washers Silicone sealant Torsen locking differential as centre differential for the LT230 transfer case can be found here in the shop !
Prices incl. VAT;
High-quality side bearing New side bearings are required when installing a differential lock (Detroit Locker or TrueTrac) if your vehicle has a P38 or Rover axle. Not required for the Salisbury axle. Please order this item twice. We obtain the side bearings from brand manufacturers such as Timken.
Prices incl. VAT;
ATB Torsen differential lock - Defender 90/110/130 front axle and Defender 90 rear axle
€749.00
Prices incl. VAT; / Parcel shipping
Delivery time 20-25 working days
Differentials are among the most important and heavily used mechanical parts and can make a huge difference in performance, especially once you leave the asphalt behind. This much is undisputed, but then the first question usually is whether you need proper lockers on the axles or at least limited slip diffs?
Our answer: Unless you’re regularly punishing your Landy in heavy terrain and prefer it climbing over driving, a locker probably makes little sense for you. In ambitious everyday use, retro-fitting a Limited Slip Differential (LSD) like the Ashcroft ATB or the TrueTrac by Eaton will make a huge difference, though. For most drivers most of the time, limited slip diffs will be the best choice on-road, with varying surface and weather conditions, as well as off-road.
But first some basics: in contrast to real lockers, which lock up your axle either electronically or pneumatically, LSDs work in the background all the time and not only if you switch them on. Moreover, there is no need for external input. They neutralize the torque differential on one axle gradually or in increments, whereas a real locker has only two states: either completely off or on. This in turn means that the LSD supports the driver continuously and unnoticeably on loose or slippery surfaces and can even beat lockers in certain tricky situations. Every seasoned off-roader will know this one: the vehicle is tilted sideways on slippery ground and the lower rear wheel with most of the load on a locked axle will pull the back of the vehicle violently sideways and downhill when you step on the gas pedal. Moreover, the enormous forces working on locked axles usually require re-enforcements to the drive train, if you want to avoid costly damages in such situations.
The Ashcroft ATB LSD, available for Rover front axles (Defender 90/110/130) and rear (90) as well as for the P38 axle on 110/130, is of a Torsen Type 2 design, similar to the Eaton Truetrac, but with a slight difference. The engineers at Ashcroft are employing 6 instead of 3 pairs of helical gears parallel to the axle. The differential creates the necessary friction for torque compensation by pressing these helical gears to the sides of their pockets. Now, if you’re thinking metal on metal, there’s got to be loads of wear on these gears, you need not worry. Both the Ashcroft as well as the Eaton are designed to compensate for the wear and will be among the most long-lived movable parts in the car.
One drawback inherent in this particular design is the fact that at least one wheel per axle has to have a load on it for the diff to engage. Pre-load springs on the Ashcroft minimize the effect. If you have both wheels spinning, simply engaging brakes and throttle simultaneously will initialize the torque compensation again. In cars with traction control, this effect is achieved electronically, by the way. The ATB LSD otherwise supports the traction control by multiplying its effects. Because of these characteristics inherent in the design a vehicle fitted with Ashcroft ATBs should never be brake-tested on rollers.
The Ascroft ATB is reliable, quiet, supports traction control if fitted, needs little maintenance and improves both the driving characteristics and the power transmission, depending on your setup. It fits Rover and P38 axles (including fittings).
ATB Torsen differential lock Salisbury is only suitable for Salisbury rear axles. For Salisbury axles, the Detroit Truetrac from Eaton is also recommended as an alternative.