Rooftop tents and outdoor

Mobile parking heater with aluminum box, various versions Make way, here comes the second generation of our mobile parking heaters in a box! We have packed even more technology, even more experience and even more customer feedback into our new mobile heating boxes. If you are looking for a small, self-sufficient and portable heat source with unrivaled capacity for cold days and nights in unheated outdoor shelters or temporary accommodation, you get everything you need (or want) in a small, weatherproof aluminum box. Available in three modular versions with different configurations, the Nakatanenga heating box provides the perfect, independent heat source for tents, gazebos, garden sheds, mountain huts, snack stands, stalls and much more. The heart of the mobile parking heater is the Autoterm Luft 2D, a diesel-powered air heater with a maximum heat output of 1.8 kW and a diesel consumption of just under a quarter of a liter per hour at full power. With a tank capacity of 18 liters in the twin-tank version, this means that it can heat at full throttle for over 70 hours. The economical unit, which is also very quiet at 55 dB thanks to the exhaust silencer, is controlled by a digital control unit with timer in the version with two batteries and can also be switched on and off by radio remote control. This allows you to preheat your camper, roof tent, caravan or hunting lodge in good time for getting up or for the evening, for example, and operate it from the place where you are staying or sleeping inside*. In contrast to the previous models, the three versions of our mobile parking heater are now only available in one box size, namely 42 liters. This is significantly more compact than the old version in the large version and only slightly more voluminous than the small model from before. What is the advantage? The new universal crate has a modular interior with a powerful performance. Depending on whether you need tanks, batteries or both in the box, you can choose the appropriate version when purchasing: with 9.2 L single or 18.4 L double tank, each without battery, as well as with single tank, two batteries and digital control. However, it can also be easily retrofitted or converted if requirements change. This is made possible by elaborately designed brackets in the box and the use of specially manufactured, made-to-measure tanks.   Features of heating box 1 and 2 (without battery) - USB interface for charging smartphone, power bank, tablet, etc.- Capacity display- PU5 control panel (without timer and storage options)- 12 V connection socket for supplied pole terminal cable- Alternatively, a cable for cigarette lighter (KMSH cable) can be used- 2 radio remote controls- Connection option for external temperature sensor (the connection is inside the box, not outside)”   Features of heater box 3 (with 2 AGM batteries) - USB interface for charging smartphone, power bank, tablet, etc.- Capacity display- Comfort Control control panel (with timer and memory option)- SAE connection socket (suitable for Optimate chargers or Optimate solar charger)- 2 radio remote controls- Connection option for external temperature sensor (the connection is inside the box, not outside)   Equipment of heating box 4 (with 1 LiFePo battery) - USB interface for charging smartphone, power bank, tablet etc.- Capacity display- Comfort Control control panel (with timer and memory option)- SAE connection socket (suitable for Optimate chargers or Optimate solar charger)- 2 radio remote controls- Connection option for external temperature sensor (the connection is inside the box, not outside)-> Please only use LiFePo-compatible chargers Equipment of heating box 5 (with 2 LiFePo batteries) - USB interface for charging smartphone, power bank, tablet, etc.- Capacity display- Comfort Control control panel (with timer and memory option)- SAE connection socket (suitable for Optimate chargers or Optimate solar charger)- 2 radio remote controls- Connection option for external temperature sensor (the connection is inside the box, not outside)”-> please only use LiFePo-compatible chargers The warm air is transported via a firmly screw-fastened, waterproof Flexi hose. As the warm air hose is different for every user and every requirement, we do not include a standard length, but leave it up to you to order the desired length separately here in the store, with or without a silicone sleeve. You can find the perfect storage bag for the Flexi hose here in the store. Regardless of the configuration, the mobile parking heaters are always easy to transport and make the difference between experiencing and suffering in the cold seasons. Whether it's an aurora safari, selling cookies at the Christmas market or winter camping in a roof tent, nothing is really fun if you freeze to death. *ATTENTION: As a precaution, we would like to point out that operation in closed rooms is not permitted due to the risk of poisoning from exhaust fumes. In addition, for optimum heating performance, make sure that the air inlets for combustion and hot air are positioned so that they are protected from the weather. Dimensions Internal dimensions 550x350x220 mm External dimensions 580x380x240 mm Empty weight: 2 tanks, without battery: 18 kg 1 tank, without battery: 16 kg 1 tank, 2 batteries: 36 kg Depending on how many starts are made, the battery lasts at least 40 h, but more likely between 60 and 70 h.  LiFePo4 batteries - i.e. batteries with a lithium iron phosphate cathode - are the ideal supply batteries for camping or electrical work on the move. In contrast to conventional lead-acid AGM technology, lithium batteries combine superior charging properties with much lower weight and volume and a long service life. LiFePo4 batteries can be deep-discharged without any problems, which sooner or later leads to irreparable damage with AGM batteries, as the rule of thumb here is that you should never draw more than 50% charge. If you are not dependent on the greater cold tolerance of AGM batteries, you should definitely consider the higher costs for LiFePo4 batteries and compatible charging technology. The weight and space savings, the long service life and the uncomplicated discharging and charging of the battery are strong arguments in favor of the investment. What's more, LiFePo4 technology is also extremely safe And a special note on aluminum: Although we take the utmost care during storage and shipping, as with all our products, aluminum boxes can always show minimal scratches, stains, dents or other surface features upon delivery. These are material-related and result from the specific properties of the light metal.  In contact with oxygen, aluminum forms a natural, corrosion-protecting patina and is also relatively soft compared to steel, which is three times heavier. This makes the material ideal for use in sheet metal, especially when weight and resistance are important. On the other hand, however, it also means that aluminum can never be completely free of patina or other marks, even on delivery: Small scratches, stains etc. therefore do not constitute grounds for complaint. Ultimately, aluminum boxes are intended to be robust objects of daily use. Like everything that is actively used, they develop an individual patina and every trace of use tells a story. So, have fun with it! Please note the variants without batteries:  Most portable power stations or battery boxes (such as Goal Zero, Eco Flow, Bluetti etc.) are unfortunately not suitable for operating mobile parking heaters. The heater requires up to 15A as starting current and when shutting down, but very few battery boxes can provide this. Suitable battery boxes for operating the mobile parking heater Please note the legal information on batteries HERE. For certain types of batteries, we are legally obliged to charge a deposit.            

Ready-to-go roof tent: Evolution 2 Basic incl. accessories You are gently awakened by the sun's rays coming in through the rainproof skylight. You slept well, thanks to the comfortable mattress and the 3D mattress pad underneath. You look around - there is enough space, no mosquitoes or other bugs buzzing around. You open the entrance and get your shoes out of the net attached to the floor of the tent to climb down the ladder. This is your adventure, this is where you want to be! For how long? - That's up to you. Your vehicle will take you anywhere and with the Roof Lodge Evolution 2 rooftop tent you have all the freedom to stay or travel on! Your trip, your experiences, your freedom - no one can take that away from you! For shipping reasons, the stated shipping weight differs from the actual weight. You are not sure whether a roof tent can be mounted on your vehicle? We are happy to support and advise you! So far we have found the perfect solution for almost every vehicle.Just contact us at: ☎ +49 9181 / 466 644 or write us. Roof Lodge Evolution 2 - 140 / 165 Extended  The equipment at a glance Tent skin: 320 g/sqm polycotton, PU-coated; the darker fabric of the tent skin allows a restful sleep even in the morning hoursSun sail: 280 gsm polycotton, metal-coated; due to the comparatively heavy quality, significantly less fluttering noise2 roof windows with rain and mosquito protectionOutward curved poles for better water drainageGround tent made of 280 g/sqm polycotton, metal coated - 165: adaptable to a tent mounting height of approx. 170 cm to 210 cm- floor area approx. 180 cm x 200 cm- 140: tent mounting height of approx. 200cm- floor area approx. 160 cm x 200 cm- floor pan made of PVC fabric- Stable protective cover made of PVC fabric (similar to truck tarpaulin)- 4 side walls; window and entrance door with close-meshed mosquito net Thermoplastic honeycomb floor; German brand productone-piece mattress (60 mm thick); available in two hardnesses; manufacturer: Saar-Schaum, Germany- standard mattress: recommended for persons up to 100 kg or those who like to lie softly- hard mattress: recommended for persons over 100 kg or those who like to lie hard3D mattress base (10 mm thick) for restful sleep; the base prevents condensation.fine-mesh mosquito protection on all windows and the entrance Additionally included with the tent: Aluminum ladder for a mounting height of the tent up to 2 meters incl. Nakatanenga compensating feet; adaptable to the vehicle height (and extendable with an optionally available ladder extension)Stable protective cover made of PVC fabric (similar to truck tarpaulin)LED tent lighting2x Nakatanenga travel pillows6x spring steel polesMounting material and required toolsThe supplied mounting material is used to mount the tent on standard crossbars with a width of up to 120 mm. If you have a different mounting situation, please contact us - we will be happy to provide you with alternative mounting options.pre-drilled mounting rails, which can be shortened according to the mounting situation (for details please refer to the enclosed detailed mounting and maintenance instructions)Roof tent net for shoes and small items (mounted on the front underside of the honeycomb floor). Features: Lying surface: 140 cm x 240 cm (140) / 165 cm x 240 cm (165) ; Height: approx. 120 cmPacking size: 143x124x40 cm (140) / 168x124x40 cm (165)The height of the folded tent is about 45 cm. This measurement is composed of the height of the mounting rails, the height of the folded tent and the height of the ladder lying on the tent. The ladder can be dismantled if necessary (keyword ferry).Can be mounted on off-road vehicles and also passenger carsMaterial: 65% polyester / 35% cotton (tent skin, sun sail & ground tent)Material: 100% cotton (mattress cover) And by the way: Since we naturally apply only the highest standards of material and workmanship to our own Nakatanenga roof tents, they have been manufactured only in-house for many years. As a result, absolutely every step in the process goes through additional quality control. Every tent that is marked with green delivery status in the store can also be picked up from us at short notice by appointment. Further keywords for this item: roof lodge, roof loge rooflodge, roof tent, roof-lodge, roof-tentWe will be happy to advise you: ☎ +49 9181 466 644  

Ready-to-go roof tent: Evolution 2 Basic incl. accessories You're woken up by the rays of the morning sun shining through the rain-proof roof-top window. You've slept well thanks to the comfortable mattress and the 3D mesh underneath. You're having a look around - there is plenty of space, no mosquitos or other insect that are flying around. You open the entrance and get your shoes out of the separate storage net to begin your descent.  That's your adventure. That's exactly where you want to be! For how long? That's up to you. Your vehicle gets you everywhere and the Nakatanenga Roof Lodge Evolution roof tent gives you all the freedom to stay or to travel onwards! Roof Lodge Evolution 140 Basic Features tent outer fabric: 320 g/sqm Polycotton, PU coated; the darker fabric allows for long sleep through the morning hours awning: 190T nylon fabric, nomad, PU coated; the relatively heavy weight minimizes fluttering noise 2 roof windows with rain and mosquito protection ground tent: - adjustable for tent mounting heights from about 170 cm to 210 cm- base area: 140 cm x 120 cm- floor pan PVC fabric- durable cover made of PVC fabric (similar to lorry canvas covers)- 4 side skirts; window and entrance with close-mesh fly sheeting- the lighter fabric allows outside light to enter the awning thermoplast honeycomb floor; made in Germany once-piece matress (60mm thickness); available in two degrees of hardness, manufacturer: Saar-Schaum, Germany separate 3D base mesh (10mm thickness) for relaxing sleep; the mat prevents condensation close mesh mosquito fly sheeting on all windows and entry  Additionally supplied with: aluminium ladder for a tent mounting height up to 2 metres, adjustable to vehicle height (optional extension available) hard-wearing protective cover made of PVC fabric (similar to lorry canvas covers) 2x LED interior light 2 Nakatanenga travel cushions 8 flexible steel poles fitting material and necessary toolsThe supplied fitting material allows fitting to standard roof bars with a width of up to 45mm. Should you plan to fit differently please contact us in advance - we can help you with alternative fitting scenarios. pre-drilled mounting rails, to be cut to length according to your requirements (instructions in the supplied fitting instructions) Size and Weight sleeping size: 140 cm x 240 cm ; height approx. 120 cm pack size: 147x124x40 cmThe height of the folded tent is about 45 cm, being the sum of the mounting rails, height of the folded tend and the height of the ladder that rests on top of the folded tent. The ladder can be detached from the tent (e.g. when overall height is important like on ferries, etc. weight of tent: 45 kg (incl. protective cover, ladder, mounting rails) can be fitted to vehicles (also passenger cars) with a mounting height up to 2.10 m Information on the subject of roof loads can be found in the manuel / data sheet tab. Further keywords for this item: roof lodge, roof loge rooflodge, roof tent, roof-lodge, roof-tent We will be happy to advise you: ☎ +49 9181 466 644

Roof Lodge Lightweight 140 Basic roof tent - the complete package This offer already includes all the accessories that make travelling with a car roof tent even more comfortable. Just decide on a mattress and the optional awning.   The following accessories are already included in this complete roof tent set: 3D mesh mattress underlay (10mm; optional with our Saar foam mattresses) - the icing on the cake when it comes to sleeping comfort in the roof tent. This underlay also prevents condensation, which is typical of roof tents with closed windows. Ladder levelling feet - a secure stand of the ladder, independent of the ground, helps to avoid damage to the roof tent. Stowage net - for all the things you prefer to stow away outside the roof tent. LED tent lighting The LIGHTWEIGHT roof tent - the technical components: >>> Detailed explanations and a description of the points listed below can be found on our info page, which opens in a new window. >>> Tent skin and awning: 102 g/sqm technical RipStop nylon, Oxford weave, PU-coated outwardly curved 25mm aluminium poles ensure noticeably higher stability of the roof tent and better water drainage Thermoplastic honeycomb floor; German brand product 2 "lockable" roof windows with mosquito protection fine-mesh mosquito protection on all windows and the entrance Aluminium sliding ladder Choose a mattress: one-piece mattress (60mm thick; also available with optional 3D mesh mattress base); available in two hardnesses; specially developed by Saar-Schaum (Germany) for use in folding tents. standard mattress: recommended for persons up to 100 kg or those who like to lie softer hard mattress: recommended for people over 100 kg or those who like to lie harder Self-inflating mattress Also available: our optional awning Sidewalls: 102 g/sqm technical RipStop nylon, Oxford weave, PU coated. Height awning/annex room 200cm Footprint 140 cm x 130 cm 4 side walls that can be rolled up or opened out independently of each other; the side walls can be joined by means of the zips and you get a 5-sided enclosed space the lighter fabric lets a pleasant amount of light into the awning Product description Light Roof Tent LIGHTWEIGHT Why and for whom a Roof Lodge LIGHTWEIGHT roof tent? For car campers and roof tent enthusiasts, roof loads are often a (ge)important issue. If you take it lightly, you risk roof damage. But away from the play on words and towards the bare figures, because the trend is clear: the average dynamic roof loads of vehicles are falling. While the G-Class with 200 kg and the new Defender with up to 168 kg are still solid values, things go downhill pretty quickly after that. Even a new Land Cruiser J150 Prado only manages 80 kilos, and in the normal passenger car segment the average is closer to 60 kilos, with a downward trend. In addition to changes in vehicle statics due to lightweight construction and electrification, the increased use of sensors and assistance systems is probably responsible for this. And even if the values for a stationary vehicle are of course considerably higher, the critical range for commercially available roof tents is approaching. At Nakatanenga, we are reacting to this development at an early stage and have therefore developed the Roof Lodge Lightweight, an ultra-light roof tent which, with a total weight of only approx. 46 kg, weighs a record low on the scales or the car roof. Of course, there are no restrictions on the space, comfort and weather protection you are used to from our Roof Lodges. How does it work? What is the difference between the LIGHTWEIGHT roof tent and our EVOLUTION 2 folding tents? >>> Detailed explanations and a description of the points listed below can be found on our info page, which opens in a new window. >>> First of all, we use 100% Oxford nylon with ripstop for the skin of the Lightweight, an extremely strong but surprisingly light material that weighs in at only 102 g/m2. Compared to the 320 g/m2 on our Evolution 2, this is a reduction of a whopping 78%. The fabric of the tent skin and the sun awning of the Lightweight are identical, PU-coated on the inside and impregnated on the outside. This means that no compromises are made in terms of wind and rain protection. How can weight be saved on the roof when travelling with the roof tent? Further weight can be saved on the Roof Lodge Lightweight by choosing the mattresses. As an alternative to our one-piece standard foam mattress (60 mm, approx. 5 kg) and the optional 3D mesh mattress (approx. 3.5 kg), we also offer a self-inflating Kampa mattress with a thickness of 10 cm and a weight of approx. 5.5 kg. The 10 cm thickness of the air mattress has been chosen so that, with a lower total weight, a comparable lying comfort and similar insulation properties to the combination of foam mattress with mesh underlay are given. Last but not least, the aluminium ladder can be removed and transported inside the car, which reduces both the roof load and the overall height of the vehicle. On car ferries, for example, 10 cm less height can often make a money-saving difference. Anyone who would like to go on a road trip with their own roof tent in times of limited contact, but does not have heavy four-wheel drive vehicles and would like to experience this adventurous way of travelling in the best sense of the word with station wagons, SUVs and even smaller cars up to hatchbacks, will be delighted with the Roof Lodge Lightweight. This item is bulky goods. The stated shipping weight differs from the actual item weight. The actual item weights are: Roof Lodge Lightweight with self-inflating mattress: approx. 47 kg. Roof Lodge Lightweight with standard mattress: approx 49 kg Roof Lodge Lightweight with standard mattress and 3D mesh underlay: approx. 52 kg Save weight during the journey and stow the following items inside the vehicle: Ladder: approx. 4.3 kg Self-inflating mattress: 5,2 kg Saar foam mattress: 5 kg (standard) and 7kg (hard) Saar foam mattress with 3D mesh underlay: 8kg and 10kg respectively Further keywords for this item: roof lodge, roof loge rooflodge, roof tent, roof-lodge, roof-tent  

Hot water - Always and everywhere At home, you have warm water coming out of your taps, just like that. That’s why armchair travelers never really appreciate what a precious commodity that is. But if you spend enough time on the road or in nature – be it in a camper van, on a boat, in a food truck or a market stall – you will know what a truly great thing water is when it flows clean and warm wherever and whenever you need it. If you already have a diesel heater installed in your vehicle, boat or trailer – by AUTOTERM or an equivalent – you can easily upgrade to a warm water system. Pundmann have designed their mobile water heaters, the 6-liter Therm 6AIR and the 9 liter Therm 9AIR, specifically for AUTOTERM diesel heaters. Accordingly, installation is completely hassle-free. If you have a 230V power outlet available, you can run the water heater with the inbuilt 500W heating element. Whenever there is no electricity nearby, simply let your Autoterm (or equivalent) do the job of heating your water. It will take 50 minutes for the smaller 6-liter tank and 60 minutes for the larger tank. Operating pressure is at 1.5 bar/21.75 psi with a security valve limiting pressure to 2.2 bar/31.9 psi. Dimensions of 200 x 228 x 360 (6 l) or 200 x 228 x 520 (9 l) mm, respectively, make the tanks small enough to fit even in tight spaces. Mounting plates, adapters, pipes, mixing taps and other accessories can be found here. Last but not least, the tanks are made from stainless steel and meet food safety standards The article is suitable for any parking heater (gasoline, diesel, gas) from 2kw.

Mobile parking heater without battery and in aluminium box You can find information on hire equipment below. “It's a Thin Line Between Love and Hate” is the old song and this thin line between loving and hating the same thing is definitely the line on the thermometer in winter. If you freeze off the part of your body with an A, you're guaranteed not to enjoy even the fattest fish at the ice hole, the most magical aurora borealis or the greatest fun at the elephant meeting. That's why we have our solution for all outdoor activities in the cold seasons in the Alubox Pro: the AUTOTERM parking heater for on the go! With the exception of the battery, everything you, your family or your crew need for a warm and cozy outdoor feeling in your car, camper or roof tent is in the ultra-robust, waterproof 29L box. At its heart is the affordable and powerful AUTOTERM (Planar) 2D12 air heater, which can be powered from the vehicle battery via the cigarette lighter adapter. It is controlled via the PU5 control element. A 5.4 l fuel tank is already integrated in the box. This makes our mini heater ideal for on the road and mobile use on the vehicle or wherever a weatherproof cable connection to a car battery can be established. The warm air is transported into the room to be heated via a firmly screw-fastened, waterproof Flexi hose, which can be ordered separately in the desired length here in the store. ATTENTION: As a precaution, we would like to point out that operation in closed rooms is not permitted due to the risk of poisoning from exhaust fumes. Furthermore, for optimum heating performance, care should be taken to ensure that the air inlets for combustion and hot air are positioned so that they are protected from the weather. You can find the perfect storage bag for the Flexi hose here in the store.A larger standalone version of this parking heater with integrated battery is available here. You can also hire this parking heater from us.  Alu-Box Pro (29 liters) waterproof/dustproof according to IP54 standard AUTOTERM (Planar) 2D diesel / air heater ✔ Fuel tank (5.4 liters)✔ Hot air pipe connection, non-return valve, outlet and inlet feed-through✔ Including radio remote control✔ The openings for supply and exhaust air and for the power supply are splash-proof (can be closed with a screw cap or rubber plug)Dimensions of the aluminum box: WxHxD 390x340x290mmDimensions of the box with spigot: WxHxD 490x340x290Total weight: 11.2 kgTechnical data of the parking heater:- Fuel type: Diesel- Heating output: max. 1.8kW, min. 0.8kW- Volume of heated air: max. 75m³/h, min. 34m³/h- Fuel consumption during operation: max. 0.24l/h, min. 0.1 l/h- Power consumption during operation: max. 29W, min. 10W- Manual start/stop- Connection to a car battery or another external 12V battery PU-5 control element: - LED for ventilation display- LED for operating display- Temperature adjustable via rotary control The AUTOTERM Air 2D (Planar 2D) is equipped with an altitude kit! This means that the heater automatically reduces the injection volume according to the ambient air pressure. This reduces or prevents sooting of the combustion chamber when the air oxygen content falls. The maximum heat output decreases in proportion to the amount of oxygen in the air. Roughly speaking, from 2000 meters upwards, the loss of output per 500m altitude is approx. 5%. Manufacturer tests up to 3440m were problem-free. No problems are to be expected up to 4000m. Up to 5000m the software calculates itself - but this could not yet be tested at real altitude. Please note: Most portable power stations or battery boxes (such as Goal Zero, Eco Flow, Bluetti etc.) are unfortunately not suitable for operating the mobile parking heaters.The heater requires up to 15A as starting current and when shutting down, but very few battery boxes can provide this..In general, however, direct connection to the battery terminals is the best solution Please note the legal information on batteries HERE. For certain types of batteries, we are legally obliged to charge a deposit.      

Box inlay bag for Alu-Box Pro, single Tired of carrying your luggage around and packing it into your roof box? You can conveniently fill these box inlays with your luggage at home and then place them in the roof box. No more cumbersome carrying back and forth! You can store many handy and bulky items in aluminium storage boxes such as the Alu-Box Pro roof box. But should you really store everything possible in it? What about clothing or delicate small items that could be soiled or damaged by aluminium abrasion from the box? You can avoid such problems with this new inner bag. Tidiness is the keyword - because you can mark the pockets with the fluorescent, inscribable ID patches. Up to three filled box inlays fit into one Alu-Box Pro S198 roof box. If you use our aluminium storage boxes Pro in different sizes, pay attention to the dimensions and volume specifications of the respective box. Of course, the inner pocket does not have to be completely filled and can therefore also be placed in smaller Alu-Boxes - a box inlay also fits in the 74, 81 or 120 litre Alu-Box Pro, for example. The model comes with a 2-way zip and a MOLLE Velcro surface (12 cm wide & 7.2 cm high) for attaching practical ID patches. Material: Polyamide 6.6 with PU coating Colour: Grey Coyote Capacity: approx. 66 litres Dimensions: Length 70 cm, width 35 cm, height 22 cm Price per piece    

Transporting water easily – smart solutions for campers and adventurers The bulkheads are sealed and everything is stowed away perfectly, right? Anyone who goes on a long trip knows the satisfying feeling of having everything packed away safely yet within easy reach. At the same time, however, there is always that nagging feeling in the back of your mind. This or that item takes up unnecessary space or has to be secured in a cumbersome way. Couldn't there be a better way?   Don't worry, there is. At least when it comes to our water canisters made of sturdy plastic. The 5 and 10 L drinking water containers are stackable – even when mixing sizes – and therefore extremely space-saving. Whether in an off-roader, boat, or camp, the interlocking molded side walls ensure that the canisters fit together and cannot slip. The round recesses in the middle (one for 5 L, two for 10 L) are designed to secure the containers in a rack or with a strap. This makes it easier to secure the canisters in a block and guarantees optimum load security even when the vehicle is in the most unstable position off-road. The black Adventure Tanks for drinking water are free of bisphenol A, which is harmful to health, have separate filling and outlet openings, and come with our high-quality tap.   Size: 5L, 10L Color: gray Available with and without tap   By the way, the canisters are also available in red for fuels.

Comfortable seat cushion suitable for 48L transformer box – Comfort Meets Function Turn your sturdy Transformer Box 48L into a comfortable seat or resting place – quickly and easily with our high-quality seat cushion. Also ideal for other surfaces. Why it fits so perfectly: The Transformer Box impresses with its smart design: it is made of durable HDPE, extremely resilient (static load capacity up to 800 kg for 48 L), and even when folded, it takes up minimal storage space. In addition, the contents can be accessed at any time via the practical front flap, even when stacked. The seat cushion turns any surface into a comfortable seat: with its 4 cm thick foam core, it ensures pleasant seating comfort, while the nylon PU-coated cover is robust, removable and washable – perfect for outdoor use. It can be easily secured using sewn-in loops that can be attached under the box lid. Colour options for the seat cushion: Grey Black Stone grey-olive Note: In order for the Transformer boxes to be used as seating, they require a matching wooden lid on which to place the seat cushion. A custom-fit plastic lid is also available to protect the wooden lid.

Armytek Zippy Keychain Flashlight Armytek, Canadian manufacturer of high quality flashlights for extreme tasks, have developed a small and light keyring lamp for your pocket. Unlike Armytek’s extreme outdoor flashlights Tiara or Wizard, the Zippy is truly an everyday item. Zippy sounds like Zippo, the legendary reusable lighter, and that’s most likely no coincidence because, like the Zippo lighter, the Zippy lamp is small, compact and absolutely reliable. The Zippy is 9 mm thin and weighs only 12 g. In stark contrast to many other keyring lights, usually given away as branded merchandise, the Zippy is a proper multifunctional flashlight with 3 light modes, 160 OTF Lumen and 15 m beam distance in the brightest setting. The wide-angle illumination is a great help when you need to orient in the dark or want to find a misplaced item. There is also a low light “firefly” mode to find a keyhole and a brighter ambient light setting for quick repair jobs. It will be more than enough light to change a tire or a fuse, fix starter cables to a car battery and a lot more. The integrated 100 mAh Li-Pol battery lasts 17 min in the brightest mode and 10 h in the darkest. It is recharged via USB. The Zippy’s housing is water- and dustproof to IP67 standard and protected by stiffening ribs. Its ring attachment is made from metal and firmly integrated into the construction. There’s no breaking it off or tearing it out of the housing. And then there’s another great design feature you’ll appreciate if you hate disposable gadgets as much as we do: The transparent plastic housing is neither glued nor permanently pegged. It can easily be opened by four screws in case it is damaged or something needs to be fixed on the inside. The likelihood of failures, however, can be gauged by the fact that the Zippy comes with a 5-year no-hassle warranty. Armytek is a Canadian brand for high qualtity multi-flashlights for extreme performance in job and hobby. As the brand name suggests, the products are designed to correspond to military standards regarding functionality and quality.Brightness up to 160 OTF Lm.Beam distance up to 15 m.Built-in Li-Pol 100 mAh battery.5 years no-hassle warranty. Specificationavailable in blue, yellow, green and gray Light & OpticsLED light output: 200 lmOTF light output: 160 lmBeam distance: 15 mStabilization of brightness : FULL (constant brightness)Hotspot: 60°Spill: 110° Dimensions & WeightLength: 59 mmWeight : 12 g Body & DurabilityBody material : PlasticWaterproof & Submersible: 1 mWaterproof and dustproof standard : IP67Operation temperature : -10...+40 °CImpact Resistance: 2 m Modes & ElectronicsPower source: Li-Pol 100 mAhNumber of modes: 3Runtime for maximal mode: 17 minRuntime for minimal mode: 10 hAbility to use batteries with a flat contact:Protection from accidental switch-on: yes Please note the legal information on batteries HERE. For certain types of batteries, we are legally obliged to charge a deposit.

The new Oberland Arms Alu SEPP - two-handed knife The aluminium SEPP, created by renowned Italian designer Tommaso Rumici, has long since become a modern classic.The latest generation is now being produced by premium manufacturer Lionsteel in Maniago, Italy - with high-precision technology and the expertise of experienced craftsmen. The special feature: an integral handle milled from solid aluminium that meets the highest standards of design, ergonomics and workmanship.This puts the new Alu SEPP in the absolute top class - uncompromising in terms of quality, function and aesthetics.The scope of delivery includes a MOLLE-compatible knife pouch made of robust nylon, colour-matched to the knife and manufactured using a precise laser-cut process. Manufactured in Germany, the pouch is also ideal as a magazine pouch or for other tactical equipment.Technical details:   Blade length: 95mm/3.5mm   Steel: M390 stonewashed / black PVD   Handle material: Aluminium 7075 black or green hard anodised 7075  Weight: 133g   Concept/Initial design: Matthias Hainich   Design: Tommaso Rumici   Production: Lionsteel, Maniago Italy   Accessories: incl. Molle compatible knife pouch made of nylon, manufactured by Tactical Baer in Germany   All Titan Sepp knives come with QR code with the BKA notification discreetly engraved on the handle (at no extra charge)   All knives are provided with a consecutive serial number The knives are not subject to the weapons prohibition under §42a Weapons Act, because they are not one-handed knives. You can find the corresponding notice of determination from the BKA above under Downloads! At explicitly designated weapons prohibition zones, the knives, just like any other knife, may not be carried.

Waterproof transport boxes in standard and plus version With this transport box, you are equipped for any adventure. Whether you want to safely store your tools, spare parts, barbecue equipment or firewood, it offers the necessary space and optimum protection. From dusty Balkan expeditions to damp England tours, this box will be your faithful companion.  Virtually indestructible, this box made of 3.6 mm thick polyethylene defies the adversities of life. Unlike aluminum boxes, you can't dent it so easily. In addition, the UV-8 stabilizers in the polyethylene material ensure that the box does not become porous even in strong sunlight.Another highlight: the horntools transport box is not only waterproof, but also has a drain in the base. This means that any spilled liquid can be easily removed and the box can be simply rinsed out. Note: Identical sizes can be stacked on each other. These versions are available:      Version    Volume    External dimensions    Weight  TBW-50   50 Litre  630x390x350 mm   7.00 kg TBW-70  70 Litre 700x450x350 mm 8.40 kg TBW-150  150 Litre 880x560x440 mm 13.40 kg TBW-220  220 Litre 1070x630x492 mm 15.70 kg           And a special note on superficial blemishes: Although we take the greatest possible care when storing and shipping all our products, plastic transport boxes made of polyethylene may occasionally show minimal surface scratches. These blemishes are due to the material and will occur later in daily use anyway. We therefore ask you to refrain from making complaints about minor cosmetic damage. After all, transport boxes are robust everyday objects that develop a certain patina over time. Every trace of use tells a story. So, have fun with it!      

Toilet roll holder made of robust nylon Whether on the festival, camping or in the nature on the way, someday we all have to toilet. Then the toilet paper is often off or there is no one in the outdoor area. With our new toilet roll holder made of sturdy nylon, you always have your toilet paper clean and splash-proof.The drawstring opening makes it very easy to fill the bag with a roll of toilet paper. Simply squeeze the roll of toilet paper a few times to pull out the cardboard core. Now the toilet roll fits into the bag and the sheets can be pulled out through the opening.The bag was developed in-house. Made in EU. Delivery:1 piece toilet roll holder1 piece of toilet paper1 piece of lighter Please note:Toilet rolls are not a standard size! If the roll is too thick, a few rows can be unrolled. And by the way: At Nakatanenga, we only use materials with 100% nylon PU coating for all textile articles. Nylon PU (polyurethanes) is, unlike PVC, free from harmful phthalate-based plasticizers. Low molecular weight phthalates were until recently the most common plasticizers for plastics of all kinds and are even used in food and cosmetics. However, they accumulate in the environment and are due to their molecular nature suspected of acting as the body's own hormones. This is toxicologically highly questionable and is considered the trigger for various diseases, including cancer. For Nakatanenga, it goes without saying that when it comes to coating textile products, it is only possible to use environmentally friendly and harmless alternatives such as nylon PU. This item was designed, produced and tested in our in-house tailoring. A dedicated team and short distances enable continuous quality control and further development of our textile products. And if you already have a tailor's workshop in the house, then it is easy to accept customer requests for changes, special designs, suggestions and suggestions for improvement at short notice and to implement them as far as possible. Mail or call is enough!  

Nakatanenga Evolution 270° awning, incl. two side panels, stone-grey On long journeys, camping holidays or a quick trip to the lake, the 270° roof awning from Roof Lodge turns every Landy, T5 & Co into a practical and, above all, quickly opened camp. Once you have found the perfect spot for the night or even the whole holiday, the awning fans out in no time at all from the left-hand side of the vehicle to far behind the rear of the vehicle, is then supported by four aluminium telescopic poles and tensioned with the ropes. With the help of flexible side wall tarpaulins that can be quickly attached, an optimal combination of weather protection and openness can be created. Two side panels are included. This creates an adaptable, dry, wind-protected and shaded area for cooking, eating, working and relaxing. The material of the awning is high-quality, PU-coated RipStop polycotton, a blend of 65% polyester and 35% cotton. The functional fabric is extremely tear-resistant, water- and dirt-repellent and, due to its relatively high weight of 280 g/m2, also produces significantly less fluttering noise in the wind. Our Roof Lodge awning, which weighs 16.8 kg (incl. side panels), can be mounted on the right and left of the vehicle's roof rack, making it ideal for covering crucial areas such as the driver's, passenger's, side and rear doors, depending on the vehicle model and size. The awning measures 4.35m in total length and covers 4.1m at the side and 2m at the rear (see drawing in the product images). The area of the awning covers approx. 9 sqm ². The awning is secured at the rear with the included tensioning strap. A 25 mm wide nylon strap guarantees stable lashing even with the most varied vehicle/roof rack configurations. Enjoy all-round freedom - certainly 270° of it - with the Roof Lodge awning from Nakatanenga. The maximum mounting height of the awning is about 2.20 meters. Available for either the right or left side Please note: This item is bulky goods. The stated shipping weight differs from the actual item weight. The actual item weights are: 270° awning: 14.4 kgSide parts (2 pcs.): 2,4kg Fixing material (screws, brackets, etc.) is included in the delivery and there are recesses on the aluminium rail for fixing. This can be used to attach the awning to the existing crossbar (min. 2 pcs!) or to the existing roof rack.  

Floor for shower tent/ changing room Horizon   The shower floor is compatible with the Horizon shower tent. Very practical when the Horizon is used as a shower tent with a water system to prevent water from collecting on the ground and causing soft ground and mud. The shower water is drained away to the outside as required thanks to the practical system with drainage pipe and can therefore seep away further away from the shower tent. The floor weighs just 1.5 kg and has a practical, small pack size thanks to the foldable mechanism.   Technical details: Weight: 1.5 kg Material: Polyester Color: Black Scope of delivery: 1 x base 1 x hose (water drain) 1 x protective bag    

Discover the ultimate car shower tent for your overlanding adventures - the Horizon!   The new black and grey shower tent for the roof rack offers a stable construction, two built-in LED strips and a wealth of innovative features that will take your camping or festival experience to the next level.   Sturdy construction The robust construction ensures high stability, even in windy conditions. You can rely on the Horizon shower tent to protect you from the elements while you enjoy your shower - whether you're using the shower tent for overlanding, off-road adventures or camping.   2 integrated LED strips in the shower tent The two built-in LED strips ensure optimum lighting in the shower tent, whether you're showering in the morning or out and about after a long day. You will always have enough light to feel safe and comfortable. The LED strips are particularly useful if you are using the shower tent as a changing tent or changing room.   Built-in pockets and hatch to the vehicle And for even more convenience, practical pockets are built in for your care products so that you always have your shampoo and shower gel to hand. The built-in hatch to the car allows you to conveniently store your shower utensils in the car and access them quickly.   Shower tent customised to your needs Another highlight of the car shower tent is the option to lower the curtain so that you can look outside while showering and maintain your privacy at the same time. An optional floor is also available so that you have a clean surface to collect and drain water as required. This makes the Horizon the ideal shower tent with floor and drain.   The Horizon shower tent is ideal for overlanding and off-road adventures, offering comfort and functionality no matter where your adventure takes you. What's more, the Horizon is the perfect shower tent for campers who don't want to miss out on a comfortable and practical shower while travelling. Order now and get ready for unforgettable experiences in the great outdoors!   Shower tent for the roof rack The Horizon shower tent is supplied with a universal bracket for the roof rack. This allows you to securely and easily attach the shower tent to your vehicle roof rack. You can find a sketch with the dimensions here.   Technical details: Size (opened): 93 x 93 x 180 cm (L x W x H) Size (closed): 108 x 14 x 17 cm (L x W x H) Arm length: 85 cm Shower tent weight: 9.5 kg Weight floor: 1.5 kg Material: Polyester UV protection: UPF 50+ Scope of delivery: 1 x shower tent incl. cover 2 x universal bracket for roof rack Assembly material Assembly instructions Setting up the shower tent - it's that easy: To set up the shower tent, first open the zip and fold the cover upwards. Then simply roll down the tent fabric, unfold the arms and stretch the roof over it - and your shower tent is ready for use! Taking down the shower tent is just as easy as putting it up - only the other way round. Simply roll the shower tent up again and stow it away.Note: The separately available floor for the Horizon shower tent from Horntool can be found HERE in the shop.    

The camping chair - your reliable companion for outdoor adventures   Look forward to unforgettable outdoor moments with our exclusive camping chair, which has been specially developed for you. The horntools camping chair not only offers lightning-fast assembly, a comfortable sitting position and a minimal pack size, but also comes with a practical carry bag so you can take it with you wherever you go.   Set up in no time - more time for the essentials: The horntools camping chair you've been waiting for. With its clever design and patented locking mechanism, it can be set up in seconds so you can spend more time relaxing and enjoying yourself. Whether you're relaxing in nature or sitting around a campfire, the horntools camping chair makes it possible.   Relax in any position: Enjoy maximum comfort with the ergonomic seat and comfortable backrest. The perfect sitting position is guaranteed, whether you're fishing, camping or picnicking. This chair turns every moment into a relaxing experience.   Compact and lightweight - ready for any adventure: The horntools camping chair not only impresses with its comfort, but also with its extremely small pack size. Ideal for hiking and camping trips. This camping chair goes with you everywhere without taking up much space in your rucksack. Carry bag included: So that you can always transport your chair comfortably, we have included a robust carry bag. It protects your chair and gives you the freedom to spontaneously set off on new adventures.   Whether you are an experienced explorer or a weekend adventurer - the horntools camping chair will exceed your expectations and provide you with unforgettable moments in the great outdoors. Get it now and get ready for your next adventure!   Technical data: Size (open): 75 x 66 x 44/95 cm (L x W x H) Pack size closed: 68 x 17 x 11 cm (L x W x D) Frame size: 22 x 16 x 0.8 mm Maximum load capacity: 150 kg Seat height: 50 cm Seat backrest height (top edge): 92 cm Frame material: Tubular steel with powder coating Fabric material: 600D polyester with PVC coating Carrier bag material: 300D polyester with PVC coating Weight: 4.1 kg (without bag)

Foldable camping table from Horntools   Large storage surface: Despite its compact size, the table surprises with a generous surface area. Perfect for cooking, picnics or storing accessories.   Foldable with roll-up design: The camping table frame is foldable and the table top can be effortlessly rolled up in seconds and stored in the compact carry bag provided.   Adjustable height: At the simple touch of a button, the table legs can be adjusted in height and moved up and down between 40 and 65 cm.   Easy to clean: The aluminium tabletop is easy to clean, making post-camping clean-up a breeze. Spend less time on maintenance and more time in nature.   Portable and lightweight: With its light weight, this portable camping table is perfect for those who like lightweight equipment without sacrificing performance. Simply take it with you wherever your adventure takes you.   Technical details: Size assembled (L x W x H): 89 x 60 x (adjustable between 40-65 cm) Pack size (L x W x H): 28 x 11 x 91 cm Weight: 4.8 kg Table material: Powder-coated aluminium, matt black Material bag: 300D Oxford with PVC coating   Scope of delivery: 1 x aluminium table (matt black) 1 x carrying bag (black)

Function stacking is the key to well-designed camping gear and that means several functions are assigned to one piece of equipment. If you already own one of our practical Transformer folding boxes and a wooden lid, you can now turn said lids into sturdy little tables with minimal effort and without taking up any additional storage space. This dual function turns a box set into a mobile dining area in no time at all.   The foldable stainless steel table legs from KoMA.land comply with European standard: i.e. when they are screwed onto the lid of a Transformer folding box, lid and legs fit perfectly into the box when folded in. There’s nothing lying around, nothing has to be stowed away separately and your ancient folding table with the wobbly legs can finally be thrown away. Robust mechanisms in the joints ensure that the legs are securely locked in place when on the move. By the way, the legs are made of high-quality stainless steel, which maximizes both the service life and the set-up height.   Table legs are available in sizes L and M, perfectly corresponding to the lids of the 90L and 48L Transformer box respectively. The legs can also be screwed onto any other lightweight camping table top and are compatible with other Euronorm standard boxes.  Leg length size M: 32cm Leg length size L: 55cm   Available in a set of 4. Wood screws are included.Benefit bundle: Wooden lid with pre-assembled metal feet available HERE in the store    

Universal handle - Provides support where support is lacking - sizes M and L This handle is a great solution where support is lacking. The attachment is simple, ingenious and stable. The holder can be attached with rivets or screws wherever an additional or new handle is required. Areas of application can be, for example: inner car door, as an entry aid on the vehicle, on airline rails, on crates, on the Cargobear and on other roof racks as well as a replacement or supplement for all carrying systems. The handle can also be used for your interior fittings, e.g. for flaps and drawers.   Due to the flexible material, the handle is very space-saving and prevents the often painful ‘getting caught’.   Material: 100% nylon with PE reinforcements Dimensions size M: Total length: 18 cm Width: 5 cm Distance between the mounting holes: 13 cm Recommended mounting hole spacing: approx. 12 cm Size L dimensions: Overall length: 23,5 cm Width: 5 cm Distance between the mounting holes: 18,5 cm Recommended mounting hole spacing: 16,5 cm Available in: black and grey Set of 1 and 4 Mounting material is NOT included in the scope of delivery!  Please note:  The item supplied may differ slightly from the photo shown.     

Bamboo wood lids with and without metal feetRobust, weather-resistant and easy-to-clean bamboo wood lids transform the 25, 48 and 90 litre Transformer folding crates into practical tables for mobile use, camping, the workshop or any other place where the Transformer Crates are used.   There are also new table legs made of high-quality stainless steel. They are stable, rustproof and perfectly designed for durability. They also take up little space in the Transformer folding crate when folded. Thanks to the special holder, the legs are securely locked when folded and remain in place, no matter where the journey takes you.    This space-saving feature allows for efficient storage without losing valuable space. This versatility allows the tables to be used in a wide variety of spaces and for different purposes.   The stainless steel construction also allows for the maximum height of the legs, which can be stored diagonally in the box. As stainless steel remains rust-free even without a coating, it retains its timeless design for many years.  Lid dimensions: for 25L: L39.5 x W29.5 x H1.5cm for 48L: L54.0 x W36.0 x H1.5cm - including feet H 34.0cm for 90L: L73.0 x W42.0 x H1.5cm - including feet H 57.5cm The metal feet are already fitted by us in the value bundle. Metal feet in a set of 4, including template and matching screws, are available HERE in the store!   The Transformer folding boxes from Outstandards are available in the colours:   25 litre capacity: Ivory or Grey 48 litre volume: Ivory, black or olive 90 litre volume: black or olive Additional accessories can be ordered separately:       Hand trolley: for 48 litre box     Rubber straps: for 48 litre box, 90 litre box

Titanium SEPP with handle scales coated on both sides in titanium or bronze PVDThe titanium SEPP Ti from Oberland Arms. This extraordinary folder, manufactured in the knife factory of Viper/Tecnocut Italy, is convincing across the board.The eye-catching framelock knife has a 95 mm long blade in black stonewashed, 59/61 HRC and comes with a high-quality Lasercut knife pouch. The OA Titan Sepp Ti is an outstanding EDC knife that is easy to handle as a two-handed knife.Legal certainty thanks to BKA notification: There is now a BKA notification for the knives in the Titan Sepp series confirming that the Titan Sepp knives are not weapons and not one-handed knives (§42a paragraph 1, §1/2/2-a-, §1/2/2-b-, §2/3 WaffG.) You can download the BKA notification as a PDF in the documents.Details / Features / Specifications:     Blade 95mmx4mm / M390 / black stonewashed 59/61 HRC     Weight: approx. 170g     Nail stroke for two-handed operation     Framelock with steel insert     Handle scales made of titanium or coated in bronze PVD on both sides - with milled OA logo     Wire clip convertible     incl. Lasercut knife pouch All Titan Sepp knives come with a QR code with the BKA notification discreetly engraved on the handle scales (at no extra charge)All knives are provided with a consecutive serial numberThe knife is not subject to a carrying ban in Germany.Sale of knives only to persons over

The Nakatanenga Transport Boxes: Your Indestructible Partner for Any Terrain! Are you looking for a transport solution that can truly handle anything? Our waterproof and impact-resistant transport boxes, available in basalt grey or sand, have been specially developed for tough off-road and outdoor use. With these boxes, your gear stays safe, dry, and perfectly organized, no matter how demanding your tour gets. Built for Extreme Conditions Made from extremely impact-resistant plastic (polyethylene) with a wall thickness of 3.6 mm, this box defies the elements. Thanks to long-term UV-8 stabilizers, they won't become porous even under intense sunlight. Additional stress crack and pressure tests (ASTM D638, D790B & ISO527-/1A/50 as well as ASTM D1693 and 1693A) confirm their extreme resilience. Even during turbulent rides through rough terrain, the extra-strong latches keep the lid firmly in place. Thoughtful Features for the Outdoor Pro Absolutely Waterproof: Thanks to massive seals and rustproof hinges and latches, the contents are optimally protected from moisture. Also perfect for activities on or near water. Secure Cargo: Beveled lid edges and an anti-slip coating make securing with straps easier. Lockable: Holes in the corners allow for the attachment of padlocks for additional security. Practical Details: The boxes feature a screwable drain on the side, which also serves as a pressure relief valve – ideal if you want to use the box as an icebox or a stationary water tank. And for refreshment breaks, there's even an integrated bottle opener! The practical interior lighting (refrigerator principle) ensures you can see everything (not included in the 160L size). Stable Handling: The foldable handles are robust and allow for comfortable carrying. Special highlight: Integrated LED interior light with automatic functionOur boxes have a permanently installed LED light that switches on automatically when opened and switches off again when closed (refrigerator principle). This feature ensures optimum visibility inside the box even in the dark or in poor lighting conditions – without the need for manual switching.  The Transport Boxes at a Glance: Volume: 50L 90L 110L 160L Color: Basalt Grey RAL7012 Sand Colored Material: Robust polyethylene (wall thickness 3.6 mm) Waterproof and impact-resistant UV-stabilized Lockable massive metal latches Rustproof hinges and latches Integrated bottle opener and side drain/pressure relief valve Practical interior lighting     Modell Volumen External dimensions Weight TBW-50-PLUS 50 Liter ca. 65 x 38,5 x 34,5 cm 7,30 kg TBW-90-PLUS 90 Liter ca. 77,5 x 45 x 39,5 cm 11,80 kg TBW-110-PLUS 110 Liter ca. 119,5 x 47,5 x 32 cm 16,40 kg TBW-160-PLUS 160 Liter ca. 93 x 56 x 47 cm 18,70 kg   And a special note on superficial blemishes: As with all our products, we attach great importance to quality and functionality. Minor superficial scratches can occur due to the material and are unavoidable in tough use anyway - they tell the story of your adventures! Prepare for your next expedition - with a Nakatanenga transport box you have a reliable companion that provides optimum protection for your equipment. Get it now and start your next adventure well equipped!

CargoBear Quick mounting rails for various roof racks If you use your roof tent frequently or want to mount it on different vehicles, our quick mount system for roof tents is an enormously practical and time-saving solution. Whether CargoBear, FrontRunner or other roof rack systems, fastening our practical, two-part mounting rails is a question of minutes. Each rail’s bottom is attached to the carrier and the top to the underside of the roof tent, thereby providing and easy to reach connection that is equally quick to fasten or loosen again. That way, you only drive your tent around when you're actually going camping. As a general rule, two rails will be sufficient for mounting most tents. However, for larger/longer hard-shell tents, for example, we recommend using three rails. The black powder-coated bottom part (on the roof rack) of each pair of rails is attached to the stainless steel top part (on the roof tent) with two to four screws.Compared to the old frame solution, the enormously space-saving quick-change rails are very easy to pack – leading to significantly lower shipping costs compared to the expensive special delivery charges for the old system.You are not sure whether a roof tent can be mounted on your vehicle? We are happy to help and advise you! So far, we have found the perfect solution for almost every vehicle. Length: 113cmHeight: 5,5cm Just get in touch at +49 (0) 9181 466 644 Please note:the basic set consists of 2 rails with 2 upper and 2 lower parts each (4 parts).Normally, the basic set is sufficient for the assembly.E.g. for large roof tents you can mount an additional rail (2 parts) for more stability.

WASHBOX... The washbasin in EURO-MASS WASHBOX... Our WASHBOX is not only the perfect SMALL WASHBOX for van life or the camper or caravan or for boat owners who do not have something like this permanently installed. Thanks to its Euro standard dimensions of 40x30x27.7 cm (L/W/H), it is also ideal as a quick "mobile hygiene option" for transporters, lorry drivers and people who travel long distances. Like the poo box, the KoMa.Land wash box is ready for use as soon as you receive it.The wash box consists of... Scope of delivery:- Euro standard box 40 x 30 x 27 cm- Powder-coated aluminium lid (various colours)- DIVISIBLE/detachable hinges made of stainless steel- Stainless steel washbasin in an aluminium frame (powder-coated)- Tap pump with internal rechargeable battery- 2 canisters including odour trap and ventilation as well as venting- Food-safe silicone hoses and connectionsKoma.land wash box ... your advantages:- The Eurobox: Robust primary plastic for high load-bearing capacity, durability and sustainability.- Thanks to the powder-coated aluminium lid: the box can bear loads of up to 250 kg. (seat, step etc)- Precisely fitting canisters made of thick-walled HDPE were specially produced for the Eurobox size.- Stainless steel washbasin: Sturdy, easy to clean - the perfect solution for quick hygiene on the go.- Stainless steel washbasin: Sturdy, easy to clean - the perfect solution for quick hygiene on the go.- Side opening of the canisters: Enables complete emptying down to the last drop.- Suitable for "bad roads" thanks to ventilation and odour trap without immediate emptying.

TRANSFORMER Box, 25 liters, 48 liters or 90 liters, various colors Foldable plastic boxes, like the ones you often have in your boot when shopping, are a practical thing, even if they can't take much punishment. So what if the principle was made so tough, intelligent and versatile that the folding boxes could also be used for heavy-duty operations, expeditions or even military missions? That's exactly what the tactical outfitter Outstandards from Virginia thought and came up with the fantastic Transformer Crates with 25, 48 or 90 litre volumes.The durable and ecologically sustainable Transformer Crates made of HDPE with external dimensions of 540 x 360 x 300 mm (48 l) are only 72 mm high when folded and weigh an astonishingly light 2.4 kg when empty. This means that an unused 48l box takes up less than a quarter of the space. The large Transformer box with dimensions of 730 x 420 x 350 mm has a generous 90 l volume.The 25 l box has external dimensions of 395 x 295 x 260 mm and offers space for approx. 30 kg of cargo.Perfect storage for on the road and at home, private or commercial.Despite the lightweight construction, the material and construction method enable an almost industrial load capacity of up to 200 kg load for both box sizes 48 and 90 litres. The maximum static load capacity is an astonishing 800 kg for the 48-litre box, which corresponds to a stack of five boxes with the maximum load, or an almost unbelievable 1,500 kg for the 90-litre box. The 25-litre box can be loaded with up to 60 kg and is a light weight at 1.4 kg. Transport safety is ensured by the construction without metal parts, sharp edges or corners as well as the integrated stacking protection.There is also a particularly clever detail: even when stacked, the Transformer crates with 48 and 90 litres are fully accessible at all times through a flap at the front.The Transformer folding crates from Outstandards are available in various colours:         25 litre volume: Ivory and Grey         48 litre volume: Ivory, Black and Olive         90 litre volume: Black and Olive Additional accessories can be ordered separately:             Transport cart: for 48l box             Cooling bag: for 48l box             Rubber bands: for 48l, 90l box             Wooden lid: for 25l, 48l, 90l box             Plastic lid: for 25l, 48l box             Seat cushion    

Plastic lid for TRANSFORMER box, 25L and 48L Collapsible plastic crates, like the ones people have in their trunks when shopping, are really practical even if tend to be not very robust. But what if you made them so rugged, versatile and cleverly designed that they meet the standards for heavy duty jobs, expeditions or even military missions? That's exactly what tactical outfitter Outstandards from Virginia thought and that’s how the fantastic Transformer Crates with 25, 48 or 90 litres volume and an astonishing load capacity of 200 kg were born. Robust, weather-resistant and easy-to-clean lids made of bamboo wood transform the 25, 48 and 90 l boxes immediately into practical tables for on the road, camping, the workshop or any other place where Transformer Crates are in use. Exclusively for the 25 and 48 l crates, there are also plastic covers available that turn the box into a seat. Exclusively for the 25L and 48L boxes, there are plastic lids for covering or as a seat. Wooden lids for the 25L, 48L and 90L boxes with and without feet can be found here in the store The Transformer Crates from Outstandards are available in the colours:     25 litre volume: Ivory or Grey     48 litre volume: Ivory, Black or Olive     90 litre volume: Black or Olive Additional accessories can be ordered separately:     Transport Cart: for 48l box     Rubber straps: for 48l box, 90l box  

Mechanic Tray / Pad - Working pad Flexible solutions are our favorite and especially in the offroad area, in dust, dirt, grass and bumpy terrain, you learn to think around the corner. Our Mechanic Tray made of truck tarpaulin is a typical product of this Nakatanenga thinking. Who has not ever lost important small parts while screwing or accidentally knocked over a plastic tray full of screws, nuts and washers? With our Mechanic Tray made of truck tarpaulin, working in dirty or badly lit off-road situations becomes much easier. The flexible material adapts to coarse ground much better than rigid plastic and when you slide around under the car you will not bump around. A 4 cm high edge and - this is the trick - incorporated neodymium magnets ensure that nothing falls out during repairs and is lost in mud or grass. Depending on size M or L, we sew one or two of these high-quality magnetic discs. Our Mechanic Tray is oil-resistant, extremely stable and washable. Folded flat, it is always there and is also ideal for shooters or hunters, about to small parts (for example, when cleaning a rifle) safely set aside. In addition to the camouflage colors olive and sand, the tray is also available in orange, which helps to better locate small parts and can be used as a signal in an emergency. Incidentally, the ideal supplement to the tray is the all-purpose underlay Mechanic Tarp. Dimensions: Open:Size M: 30x40 cmSize L: 40x60 cm Pack size:Size M: 13.5x12 cmSize L: 18x14 cm Material:100% truck tarpaulin670 gr/sqm Color variations: orangeolive (RAL6006)sand colors (RAL7002)MADE IN EU WARNING:Magnets are not toys and not suitable for children. With small magnets there is danger of suffocation due to small parts that can be swallowed! Note the risk of breakage and splintering: Especially with flat designs, neodymium magnets can easily break or splinter! An uncontrolled impact of magnets as well as an external, mechanical shock or pressure load should therefore be avoided! This item was designed, produced and tested in our in-house tailoring. A dedicated team and short distances enable continuous quality control and further development of our textile products. And if you already have a tailor's workshop in the house, then it is easy to accept customer requests for changes, special designs, suggestions and suggestions for improvement at short notice and to implement them as far as possible. Mail or call is enough!

High quality plastic water cans with 20 liters and 10 liters capacity These plastic water cans are predestined to be transported (e.g., on a roof rack, in the boot, etc.) of fresh drinking water. They are now available with a new, standardized screw cap and spout in standard DIN format. Information about the canisters: 20 liter plastic water canister: Dimensions: 350x460x170 mmPolyethylene (BPA-free / food grade)Scope of delivery: 20 liter water canisters made of plastic 10 liter plastic water can: Dimensions: 260x370x140 mmPolyethylene (BPA-free / food grade)Scope of supply: 10 liter water canisters made of plastic The canisters are available in grey and coyote-brown. You can find a replacement twist cap here.  The cap has a diameter of ø 65 mm since May 2022Previously the diameter was ø 50 mm Please note: Based on various customer feedback, it can be assumed that our 20L canister is not compatible with the GMB holder!  

Set of 2 FIXPLUS straps in 15cm or 23cm Securing, bundling, fastening - it has never been easier because you were either looking for a suitable cable tie or an elastic tensioning strap. Our strap combines the advantages of both systems - without their disadvantages. Because it can be used with one hand, is as flexible as an elasticated tensioning strap but without the treacherous snap-back and, above all, is reusable. Simple! Ingenious. Can be used on many sides: camping (securing), car (fastening), sports (lashing, bundling), DIY & garden easy one-handed operation: super-simple quick release fastener, no snapping back, no scratching secure: guarantees a stable hold even with strong vibration & knocks, even after frequent use, tear-resistant, elastic and flexible durable: heat & cold-resistant (-30°/+60°C), seawater-resistant, UV-resistant Set of 2 FIXPLUS Strap 15: in the colours black or orange 15cm long 1.25cm wide 5g light Circumference up to 10.5cm Tensile force: 650N / 65kg Can be joined together and therefore extended Set of 2 FIXPLUS Strap 23: in the colours black or orange 15cm long 1.25cm wide 7,5g light Circumference up to 20cm Tensile force: 650N / 65kg Can be joined together and therefore extended

FIXPLUS brackets - incl. FIXPLUS strap in various lengths Get a grip! This versatile carrying aid is just the thing for you. The combination of a sturdy polyester loop with a comfortable, secure nylon handle and a Fixplus strap is the perfect replacement for cumbersome solutions such as cable ties, cords or ratchet straps.Large and unwieldy objects like heavy hoses, ropes, cables, ladders as well as camping equipment, car accessories, sports equipment and much more are quickly and securely lashed with the Fixplus strap - even with one hand. The Nylon handle allows for comfortable carrying. The components are designed for tensile strength up to 900N/90kg and all materials have been selected to withstand maximum stress and guarantee lasting durability. The flexible Fixplus strap is resistant to UV, heat, cold and seawater.Available with Fixplus strap in lengths of 46 or 66 cm.

FIXPLUS Strap 86cm long, in the colours black or orange Securing, bundling, fastening - it has never been easier because you were either looking for a suitable cable tie or an elastic tensioning strap. Our strap combines the advantages of both systems - without their disadvantages. Because it can be used with one hand, is as flexible as an elasticated tensioning strap but without the treacherous snap-back and, above all, is reusable. Simple! Ingenious.     Versatile use: camping (securing), car (fastening), sports (lashing, bundling), DIY & gardening     Easy one-handed operation: super-simple quick-release fastener, no snapping back, no scratching     secure: guarantees a stable hold even with strong vibration & impacts, even after frequent use, tear-resistant, elastic and flexible     durable: heat and cold resistant (-30°/+60°C), seawater resistant, UV-resistant FIXPLUS Strap 86:         in the colours black or orange         86cm long         2.3cm wide         50g light         circumference up to 81cm         Pulling force: 900N / 90kg         Can be assembled and therefore extended Whether you use it to secure cargo or bicycles on your car or luggage on your bike, attach items of equipment, fix ladders to railings or branches, bundle hoses, cables or poles, connect skis or poles to each other - this ingenious strap has almost unlimited applications.