Lamp ring / headlight trim Land Rover Series III, available in various colours, price per piece. Please select the desired colour below.

Nakatanenga ventilation panels side windows - Nissan Patrol GR Y60 long wheelbase (BJ1988-1998)  Good air circulation as with slightly open windows and still no higher risk of rainwater penetration or theft than with closed windows? And protection from various insects?That's possible: with our ventilation panels with mosquito net, made of aluminium to exactly fit a wide range of off-roaders - no clattering universal parts that "somehow" hold in place! For a discreet appearance, the aluminium panels, which are supplied in pairs, are powder-coated black.Ideal not only for campers and dog owners, but also to prevent heat build-up when parking in the blazing sun. And it's super easy to install: roll down the window, insert the ventilation plate, roll up the window, done!Please note: In high temperatures, children or animals do not belong in a parked car, even with sufficient fresh air!Length: 620 mm<iframe width="560" height="315" src="https://www.youtube.com/embed/qWKDhVh_0n0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

13-poliger E-Satz für Land Rover Defender bis einschließlich MY98 - auch für andere Fahrzeuge geeignet. Ein 13-poliger E-Satz bietet gegenüber einem klassischen 7-poligen E-Satz den Vorteil, dass mit einem solchen weitere Verbraucher versorgt werden können. Dies können Nebelschlussleuchten oder Rückfahrleuchten ebenso sein wie auch Einparkhilfen. Gerade das Jaeger Stecksystem hat sich dabei als eine feste Größe auf dem Markt etabliert und ist bei Heckträgern und Wohnanhängern nicht mehr wegzudenken. Die Vorteile eines 13-pligen E-Satzes liegen auf der Hand und rechtfertigen den minimal höheren Anschaffungspreis gegenüber einem 7-poligen E-Satz allemal. Inklusive JAEGER AFC-Anhängersteuermodul zur automatischen Erhöhung der Blinkfrequenz.

7-poliger E-Satz für Land Rover Defender bis einschließlich MY98 - auch für andere Fahrzeuge geeignet. Geeignet für Fahrzeuge ohne Check Control und Datenbus-System. Im Lieferumfang sind alle für die Montage notwendigen Teile enthalten. Die Installation braucht nicht durch eine Fachwerkstatt freigeschltet werden! Inklusive JAEGER AFC-Anhängersteuermodul zur Anpassung der Blinkfrequenz.

fits all Defender from MY99 up to and including Td4

A-pillar lamp holder Jeep Cherokee & Comanche The brackets allow the mounting of lights on the A-pillar of the Jeep Cherokee XJ and Jeep Comanche MJ, supplied in pairs, incl. blind rivet nuts. Ideal for this mounting location are compact LED lights with tightly focused illumination (thus minimizing reflections from the bonnet), we recommend the Vision-X Cannon LED driving lights here. The brackets are made of stainless steel and can also be supplied with a black powder coating - please select the desired variant below.

The adapter converts electircal signal from 7 point connectors to 13 point connectors or vice versa.  The assignment plan comes with each individual adapter, DIN ISO 1724 and DIN ISO 11446. Please choose your desired option.

Ships without safety pin.  Safety pin available here.

Up to 3.5 tons, with second safety bolt and safety split pin, the original bolt of the Dixon Bate is still used! The hole distance from hole center to hole center are about 5 cm

The Dixon-Bate quick release allows for a quick switch between ballheads, while at the same time being height adjustable either up to 150 mm or up to 200 mm. Thanks to the Dixon-Bate system everything with a 90x45 mm hole pattern can be mounted, in various heights, behind your car, regardless of whether it's a ball head or something else. Details:Hole Pattern: 90x45 mm M16 S Value: 350 kg D Value: 23.41 kN max. Towing Capacity: 3.500 kg Thanks to the E-certificate, in Germany, this part can be added to your car without having to go through the TÜV. The quick release system is especially useful when using the Land Rover towing hitch step. The product ships including the needed hardware and an instruction manual. Please select one of the options from the drop-down menu.

Air intake cover for all Land Rover Defender models (Tdi, Td5, Td4 2.4 and 2.2), set of 3, made of 2 mm aluminium to replace the plastic covers. Powder coated, comes with stainless steel fittings. Image similar

Air scoop, for Land Rover Defender 90/110/130 right or left side, for adhesive, rivet or screw mounting. Material: steel, black

Trailer coupling for Landrover Discovery II incl. E-kit, E-approved and ball head.

Anti-slip pad for Adventure 4x4 Rockslider, 1 pair These self-adhesive anti-slip pads with their precise fit are specially designed for the Adventure 4x4 rock sliders for Defender, Mercedes G and Grenadier. The pads are perfectly matched to the sliders’ hole pattern and they improve the Rocksliders’ good anti-slip properties even further, especially in wet or dirty conditions. The 5.5 x 50 cm adhesive strips are supplied in pairs. The dimensions are matched to the door area, but with sufficient quantity and some adjustments it is also possible to cover the entire surface.

Self-adhesive anti-slip pads Perforated metal sheets, as used on our CargoBear roof racks, on ladders, steps and other climbing aids on vehicles, are much safer than regular metal surfaces. Additional anti-slip pads, however, offer an unbeatable safety advantage, especially in wet or dirty conditions. The anti-slip pads are designed to perfectly match the hole patterns and due to its black color, they also compliment the overall look of our products. The material for the pads originates in the sports sector and has been widely used on skateboards, for example. For our spare-wheel strap-on step, we offer ready-cut, self-adhesive anti-slip pads measuring 12 x 13.5 cm in twin packs. Since the pads are manufactured with in-house laser cutting technology, we can supply custom formats on request.  

Safety nut set - optionally M10, M8 or M6 1 Set of Security Nuts & WrenchesSecure your valuable accessories firmly to your Land Rover with these tamper proof nuts. Ideal for securing your winch and front bumper. Each set contains 4 nuts and 1 key.

This set consists of 4 GripTape patches suitable for all surfaces (bumper, roof, sidebars, etc.)  measurements: 270x50 mm adhesive bottom extra-strong  weather resistant  The strips are precision laser cut in-house.  Special sizes are also possible on request. Please contact us for this simply by email or telephone.  

Ball head towing hitch This combined trailer coupling can be used for tow ball couplings with Ø 50 mm ball head and for drawbar couplings. The ball head towbar is designed for a maximum drawbar load of 250 kg. The scope of delivery includes the combination coupling and two cotter pins with suitable fastening. The mounting plate is not included in the scope of delivery.Technical data:Material: steelE-approval mark: E11Support load (S): 250 kgD-value: 17 kNMax. load: 3.500 kgDimensions: Length: approx. 195 mm; Width: approx. 130 mm; Height: approx. 180 mmDistance between mounting holes: 90 mm

Universal base carrier and expandable platform for the spare wheel. The high school of storage space optimization actually only begins when all the obvious places like the interior or trunk or the roof have long since ceased to offer anything. With our practical and universally applicable spare wheel tray, even the fifth wheel on the car becomes an equipment carrier.The practical storage solution for the spare wheel at the rear consists of two components that can be ordered individually or as a set (here in the store). The base carrier with the tensioning strap is adjustable and thus fits all common off-road tire sizes. If one mounts only the basic carrier (sideways), so e.g. starting aids, wheel chocks and other accessories can be screwed to the carrier or fastened with straps. If you want to mount the tray, i.e. the basket, the base carrier must be on top of the wheel. The loading area of the storage basket is a generous 80cm x 38cm, so that even larger equipment can find its place here. If this area is not enough, you can also turn the platform around and attach with the edge down. Raised edges and circumferential lashing holes ensure problem-free load security.Base carrier and storage basket are black powder-coated, so that the look of the spare wheel tray harmonizes perfectly with any off-roader. Base carrier: approx. W 38.8cm x D 20cm x H 15.5cmLoading area: approx. W 80cm x D 38cm x H 5cm Note: Distribute the load centrally or evenly on the platform. Pay attention to the condition of your door hinges when loading the platform! It is extremely important to secure the strap as tightly as possible in a locked position so you do not lose your equipment. We are NOT responsible for the use or misuse of the racks and damaged vehicles or lost items due to improper assembly and inspection of the load prior to travel.

Matching to our black Heritage grille:Black headlight plates with inlet gills and silver OR black powder coated headlight rings.The plates are manufactured EXCLUSIVELY for us and UNIQUE in their looks! Material: high-strength aluminium, black powder coated 1 pair plates with headlight rings and stainless steel mounting kit for every Land Rover Defender 90, 110 or 130.

Matching to our black Heritage grille: Black headlight plates with inlets and silver OR black powder coated headlight rings.The plates are manufactured EXCLUSIVELY for us and UNIQUE in their looks! Material: high-strength aluminium, black powder coated 1 pair plates with headlight rings and stainless steel mounting kit for every Land Rover Defender 90, 110 or 130.

Nakatanenga bonnet hinges for Land Rover Defender (all models, all model years) address two problems associated with the original hinges: for one they are more durable and have no play, additionally they greatly complicate bonnet theft. We have put emphasis on ease of fitting - this can be done by yourself. There are no holes that need drilling as only existing ones are used, all fixings, icluding the special safety-socket are supplied. The hinges are available in stainless steel or with black powder coating, please choose the desired finish.

CargoBear rear ladder for Mercedes G Even the best roof rack isn’t worth much, when you can’t access it quickly and safely – especially when we’re talking very tall 4x4s like the Mercedes G-Class. Depending on your vehicle specs and the roof rack, you may face a climb of well over two 2 meters with the G-wagon. This light but extremely sturdy aluminum ladder with its four steps features an angled design following the contours of the G-Class’ rear. The bottom of the ladder is wider than the top, making especially the descents much safer. A matte black powder-coated finish is as elegant as it is robust, even when you get a lot of use out of it. Our rear ladder for the G-Class fits the following models:• W460 (MY 79-92)• W461 (from MY 92)• W462 (ELBO version)• W463 (MY 1990 - 2018) The ladder is hooked into the rain gutter at the top and screwed in place; the following mounting options are available for the lower section:Standard mounting:Fastening with 3M double-sided adhesive tape.Optional mounting:Drill 2 holes and screw on with the two blind insert nuts.Installation for the G Professional:Screw the assembly to the existing screw points on the vehicle.

Rear ladder for Suzuki Jimny 2 type GJ BJ 2018 / HJ Boxier, tougher and even more capable, that’s the Suzuki Jimny 2 (GJ/HJ MY 2019). Even if cargo space has grown considerably in comparison with the previous model, optimizing your usable load capacity is still crucial if you want to get the most out of this little giant. Considering the limited interior that means first and foremost to use the roof space to the full extent: either with our own dedicated CargoBear system for the Jimny or any other conventional roof rails, bars or racks. Whatever solution you prefer, our light and strong aluminum ladder makes accessing the roof area a lot easier. Climbing to the rooftop is safer, more comfortable and allows for stress-free loading, fastening or strapping down of your cargo. The ladder is mounted on the tailgate only and has no connection with the roof or the rack, making it ideal for all kinds of carrier systems. Additionally, there is no need to drill holes either as the ladder is custom-designed to fit existing mounting points and screw holes: on the spare wheel mount, the tailgate’s drip rail and the bottom right door hinge. This also allows for quick and easy de-installation without damage or marks. The ladder is made from high-quality aluminum and features black powder coating – a perfect match for our modular CargoBear roof rack system.