The XPL Curved Lightbar is an extremely powerful installation solution for the slot of the standard radiator grille Installing work lamps, additional headlights or light bars on your vehicle is not too difficult – when you’re talking older pickups or classic Defenders, that is. Obviously, with newer cars like the New Defender one should be a lot more cautious before drilling holes or attaching brackets to the expensive exterior. Vision X Lighting specialize in custom solutions, combining top performance, sleek design and installation methods that minimize effort and actual alterations to your car.  The XPL Curved Lightbar by Vision X is an elegant and powerful LED solution for the lower opening in the standard grille of the New Defender. The array of individual 5 W CREE LEDs delivers a light beam of over 600 m – providing safety in all weather conditions, off-road or on-road, for work or sports. The XPL Curved lightbar also features backlighting that can be used as daytime running lights.  The installation is fairly simple and requires roughly 4 hrs. Both the grille’s plastic substructure and the lower opening need to be modified by sawing out specific areas. Detailed instructions, fastening materials and electric connections are included in the delivery. Mounting behind the radiator grille is also possible.  Specifications for XPL Curved Lightbar: LEDs: 5W per LED Housing material: aluminium Light colour temperature: 6000 Kelvin Voltage: 9-32V DC Current: 3.12A~8.96A@24V DC - 6.25A~17.92A@12V DC Vibration resistance: 21 Grms Lens material: Polycarbonate Smooth backlight Proprietary IRIS reflector technology Curved high power light bars Weatherproof Deutsch connector with plug-and-play wiring harness Certifications: CE, RoHS, IEC 62471, ECE R112 Thanks to our iris reflector technology and the unique curve of the bar, the XPL Curved series produces a wide spot beam pattern with a range of over 600 metres. Scope of delivery: Complete radiator grille set for New Defender with XPL-HC23 light bar, brackets and wiring harness including detailed installation instructions.

Set of 2, with E-mark, for installation. Technical data: Dimensions: 69.2x55 mmLED: 1x LED 13 WMounting: 2x M6Approval: ECE (E-mark)Material: aluminiumColour: Black or chrome - please choose.

Increased brightness for long-distance and close-range illumination Especially when driving on country roads and unpaved paths, increased visibility can be an important safety factor. The LEDriving® Functional Series FX Gen 2 portfolio provides additional close-range and far-field illumination on dark roads. Even in poor visibility conditions or at dusk, the high-performance LEDs achieve a range of up to 635 metres and daylight conditions with a colour temperature of 6000 Kelvin. The auxiliary headlamps of the FX series impress with a special reflector design and not only provide a modern and appealing look, but also reduce glare for more visibility in road traffic. They can be used both as additional LED headlights and as powerful worklights. Both versions of the lights are fully ECE-compliant and therefore suitable for use in road traffic. In addition, OSRAM has developed a special mounting kit that is compatible with all auxiliary headlamps of the FX Gen 2 series for individual mounting. Versatile in use, they defy numerous environmental influences and are particularly light and at the same time robust and resistant thanks to high-quality materials such as the aluminium housing and the stable polycarbonate lens. Complete reverse polarity protection prevents damage due to overvoltage and contributes to a longer service life. The FX series auxiliary lights have been tested and validated in a DIN-certified environmental simulation laboratory for extreme external influences with regard to water, dust, shock, heat, cold and permanent vibration in accordance with the highest IP & IK protection classes IP6K8 & IP6K9K. Their variability gives the FX series a flexible range of applications. They can be fitted to cars, trucks, agricultural machinery, commercial vehicles, construction vehicles, caravans, off-road vehicles and quads. OSRAM provides a 5-year warranty on these products. Product details: OSRAM LEDriving® auxiliary headlamp Lightbar FX125-SP GEN 2 | LEDDL128-SP Features: SPOT BEAM = For particularly focused high beam distribution Light beam of 270m Luminous flux: 1,300lm, rated power: 18W Cold white light with 6000K For 12V & 24V vehicles DT04-2P, DT06-2S connector, cable length: 1200mm Over- and undervoltage protection ECE R10, R149, ECE (Ref. 20) certification. Highest protection classes: IP6K8 & IP6K9K Robust and durable - shatterproof polycarbonate lens and die-cast aluminium housing with special black coating Efficient reflector design with 5 OSRAM high-power LEDs Side brackets included 5-year OSRAM guarantee 1)   Product description: Outstanding illumination, performance, quality, form, durability and functionality. Maximum optical efficiency, effectiveness and homogeneous light distribution Coverage of far-field illumination Perfectly matched to individual requirements and needs for multivariant use Special reflector design for an attractive and modern appearance and reduced glare Robust and resistant - for a long service life Increased safety off-road and on-road ECE-compliant and approved for use in road traffic Fields of application: Cars, trucks, 4x4s, ATVs, agricultural vehicles, commercial vehicles, construction vehicles, quads, caravans, etc. 1) Exact conditions at: www.osram.de/am-garantie Note: Single mount - no installation in pairs necessary, as two certified light sources are used.  

27 LED Tent Light Starter Kit, 155 lumens, length: 30cm Operation with 12 V via plug or with 230 V with adapter (both included) 30 LEDs on a rigid, 30 cm long light strip for a light output of 155 lumens Includes clips, adhesive pads and adhesive tape for mounting 2 m cable for flexible positioning.

Set of 2, with E-mark, for installation. Technical data: Dimensions: 69.2x55 mmLED: 1x LED 13 WMounting: 2x M6Approval: ECE (E-mark)Material: aluminiumColour: Black or chrome - please choose.

- can be used with 12 volts (plug) or 230 volts (mains adapter), both supplied - 90 LEDs on a flexible, 90 cm long light strip with an output of 294 lumens - comes with clips, sticky pads and tape for attachment - 2 metres long cord for flexible mounting

Adaptor Plate for Brake- and Fog-Lights -  Land Rover Defender previous to Model year 1998 This adaptor (1 piece) allows you to mount round breaklights and fog lights to older Defender models (previous to MY1998). This plate is compatible with your standard lights and our own LED lights.

Additional Interior Light for Land Rover NEW DEFENDER  The new Defender is being marketed as a true workhorse, but – as always – there’s room for improvement when it comes to the practicalities of working with your L663 on a day-to-day basis. One such aspect is definitely the lighting for the load space in the back. The standard set-up is somewhat sparse but most of all it lacks proper roof lights. This is especially problematic since the cargo area is often filled up or modified by installed racks, boxes and the like. Our LED light bar solves this problem with more than sufficient 396 Lumens light intensity. The lightbar is easily installed on the trim above the cargo door and illuminates the entire load space – helping you to quickly find tools and equipment and ensuring safe working conditions day or night. Mounting the roughly 36 cm long and 2 cm wide LED lightbar is really easy. Simply click the two fastening clips into the edge of the upper door trim. The clips’ custom-shape will hold the lightbar firmly in position. Connecting the device to the Defender’s wiring is just as quick by simply pushing the LED bar’s wire behind the trim and pulling it along the D-pillar towards the standard lamp housing by the fuse box. In most cases, you won’t even have to remove the trim panels. Lastly, the LED bar’s connector is simply plugged into the standard lamp’s socket. The bar is activated and deactivated as required by its own touch button. Dimensions: 362mm x 25 mm x 11mm 

Upgrading the reverse lights on your car is always a good idea – better visibility for others and for yourself when you’re parking backwards, when maneuvering with and without trailer or driving off-road in the dark. Stronger reverse lights also greatly improve the performance of reverse cameras. For the New Defender, we are offering an extremely elegant solution that needs no external fittings and has the seamless appearance of standard equipment. Underneath the rear lights on both sides of L663, two recesses in the body are ideal for housing the additional reverse lights with their six white LEDs each. Mounting the LEDs in the recesses is easy. Two perfectly fitted brackets are attached inside the gaps with self-adhesive tape. Once the plinths are fitted the LEDs are simply screwed in. The wiring is plug & play and includes all the necessary connections to the existing reverse lights. Installation or de-installation (if necessary) are simple DIY projects because the rear light panels are only clipped in and can easily be removed. Since there are no drill holes or other alterations necessary, there are no permanent traces or damages on the vehicle’s exterior. The high-quality LEDs with their watertight housing and the tough polycarbonate lenses provide more safety for you. The custom-fitted design and the superior components are a real improvement for the overall appearance of the Defender’s rear. Please note:The reverse LEDs come with an E-certificate but we have to emphasize that regulation in the EU prohibits the use of more than two reverse lights on passenger vehicles in regular road traffic. To accommodate these provisions, we are offering perfectly fitted covers for the LEDs to be used on publics roads or for technical inspections.

Kompakte Multifunktionslampe Micro USB mit Leuchtenmodus Die Elf C1 ist eine kompakte und leichte Multifunktionslampe mit einer Standardauswahl an Leuchtmodi und Micro USB-Kabel. Optimales Gewicht, beeindruckende Helligkeit und einfache Bedienung. Noch mehr Komfort bei aktiver Erholung für Jogger, Alpinisten, Höhlenforscher und Angler.Beeindruckende 1.000 Lumen in einem Gehäuse, das lediglich 56 Gramm wiegt. Die Elf C1 ist eine ausgezeichnete Haupt- oder zusätzliche Lichtquelle für beliebige Aktivitäten im Alltag. Die Lampe lässt sich einfach für einen Abendspaziergang, auf die Jagd, zum Angeln oder einen Ausflug mitnehmen. Sie nimmt wenig Platz weg, passt in jede Tasche und muss bei Nutzung im Energiesparmodus für 60 Tage nicht aufgeladen werden. Die Lampe kann auch als Leuchte genutzt werden — von einer Stromquelle mit USB-Ausgang und ohne inliegende Batterie. Dank des Micro USB-Anschlusses benötigt man kein Ladegerät: zum Aufladen eignet sich jedes Micro USB-Kabel. Der kräftige integrierte Magnet, der abnehmbare Clip und die Stirnhalterung ermöglichen verschiedene Befestigungsvarianten, und die zusätzliche Bohrung am hinteren Deckel qualifiziert die Elf C1 zu einer vollwertigen Multifunktionslampe 5 in 1. Licht und Optik: Farbtemperatur: kaltweiß / warmweiß LED: Samsung LH351D Optik: TIR Lichtstrom, Lumen: 1.000 lm / 930 lm Leuchtweite, Meter: 103 m Helligkeitsstabilisierung: DIGITAL (CPU-Helligkeitsregelung) Zentrales Lichtfeld: Seitliche Streuung: 70°:120° Betriebsarten: Anzahl der Modi: 6 Laufzeit in höchster Leuchtstufe: 52 min (530 lm after 4 min) Laufzeit in niedrigster Leuchtstufe: 60 d Stroboskop-Modus: Abmessungen und Gewicht: Kopfdurchmesser: 33 mm Gehäusedurchmesser: 20,4 mm Länge: 75,9 mm Gewicht (ohne Akku): 56 g Gehäuse: Material: Aircraft-grade aluminium Rutschhemmende Beschichtung: Premium type III hard anodizing 400HV Schutzklasse vor Eindringen von Staub und Wasser: IP68 Max. Eintauchtiefe: 10 m Max. Fallhöhe: 10 m Arbeitsbereich: -25..+40 °C Elektronik: Kompatibilität zu Stromquellen: 1x18350 Li-Ion ( auch hier im Shop erhältlich) Schutz vor versehentlichem Einschalten Farbige Batteriezustandsanzeige Anzeige eines niedrigen Ladezustands Lieferumfang: Taschenlampe 18350 Li-Ion Batterie 900 mAh Micro-USB-Ladegerät Stirnbandhalterung Halte-Clip 2 Ersatz-O-Ringe Benutzerhandbuch AnwendungshinweisFür weitere Anwendungsinformationen beachten Sie bitte das Produktdatenblatt.

Prime C1 Magnet USB XP-L White Flashlight Armytek are famous for creative outdoor and survival flashlights like the angle-head lamps Tiara or Wizard. More traditional flashlights with light beams out of the front are also better when developed and produced by the Canadians. The Prime C1 Magnet USB is such a high-quality flashlight, combining traditional design and extreme performance. A total of 11 light modes, 970 OTF Lumen and 165 m beam distance in the most powerful turbo setting, various strobe modes for signaling and a virtually endless low light setting with 60 days until the battery is drained, those are not the only top arguments in favor of the Prime C1. With a length of only 92 mm, the flashlight is compact enough to fit any pocket and so robust that it can be run over by a car. The Prime is certified to function in water depths of up to 10 m for at least 2 hrs.  In other words, you will never ever have to worry about your flashlight not being protected from rainwater, dirt and dust. As is customary with Armytek lamps, the Prime is activated and operated by a single button. The button has a firm pressure point and is recessed into the housing to prevent accidental activation and draining of the battery. Apropos draining: once the Prime is switched off, the flashlight boasts an ultra-low current drain technology. It would take the battery 25 years or more to go completely flat. Sounds too good to be true? Armytek are so confident in their product that they provide a no-hassle 10-year warranty. The Prime C1 comes with a case, metal clip, two rubber seals, magnetic charging cable and a rechargeable 18650 Li-Ion battery.  Specification: Light & OpticsColor temperature: WhiteLED light output: 1,050 lmOTF light output: 970 lmBeam distance: 165 mLED: XP-LStabilization of brightness : FULL (constant brightness)Hotspot: 20°Spill: 80° Dimensions & WeightHead diameter: 24.5 mmLength: 92 mmBody diameter: 24.5 mmWeight : 60 g Body & DurabilityWaterproof & Submersible: 10 mOperation temperature : -25..+40 °CImpact Resistance: 10 m Modes & ElectronicsPower source: 1x18350 Li-IonNumber of modes: 6Runtime for maximal mode: 30 minRuntime for minimal mode: 60 daysAbility to use batteries with a flat contact: yesProtection from accidental switch-on:yes

Prime C2 Pro - unglaublich helles, breites Licht im klassischen Format Der Prime C2 Pro ist ein Allrounder für den täglichen Gebrauch mit einem robusten Körper, einem praktischen Seitentaster und einem komfortablen Lichtwinkel von 120°.Es ist sowohl für den täglichen als auch für den beruflichen Gebrauch geeignet: Wandern oder Radfahren, Wandern, Servicearbeiten und Sicherheitsaktivitäten. Der neue Prime C2 Pro bietet eine beeindruckende Helligkeit von 2400 Lumen und größere Beleuchtungswinkel als die Vorgängerversion. Die Taschenlampe erhielt auch zusätzliche Designvorteile für den bequemsten Alltagsgebrauch: Die Länge des Gehäuses wurde reduziert, die Schlaglünette wurde hinzugefügt. Die Taschenlampe wird mit einem 18650 Li-Ion 3500 mAh Akku mit hoher Kapazität geliefert, der über ein proprietäres magnetisches USB-Kabel aufgeladen wird. Ein abnehmbarer Clip befestigt die Taschenlampe sicher an einem Rucksackgurt oder einer Tasche, und ein Magnet in der hinteren Abdeckung ermöglicht es Ihnen, sie an einer Metalloberfläche zu befestigen. Eine markante Lünette aus Stahl, ein sicheres Holstergehäuse und optionale Farbfilter helfen Ihnen, jede spezielle Aufgabe erfolgreich zu bewältigen. Prime C2 Pro ist auch mit der Fahrradhalterung ABM-01 kompatibel und kann als Fahrradscheinwerfer verwendet werden. Licht und Optik: Farbtemperatur: kaltweiß Optik: TIR Lichtstrom, Lumen: 2.400 lm Leuchtweite, Meter: 123 m Helligkeitsstabilisierung: Full (constant light) Zentrales Lichtfeld:Seitliche Streuung: 70°:120° Betriebsarten: Anzahl der Modi: 6 simple operation by default / 12 advanced operation Laufzeit in höchster Leuchtstufe: 2 h 48 min (610 lm nach 30 sec) Laufzeit in niedrigster Leuchtstufe: 6,5 Monate Stroboskop-Modus Abmessungen und Gewicht: Kopfdurchmesser: 25,4 mm Gehäusedurchmesser: 20,4 mm Länge: 117,7 mm Gewicht (ohne Akku): 68 g Gehäuse: Material: Aircraft-grade aluminium Rutschhemmende Beschichtung: Premium type III hard anodizing 400HV Schutzklasse vor Eindringen von Staub und Wasser: IP68 Max. Eintauchtiefe: 10 m Max. Fallhöhe: 10 m Arbeitsbereich: -25..+40 °C Elektronik Kompatibilität zu Stromquellen: 1x18650 Li-Ion  (auch hier im Shop erhältlich!) Verwendung ungeschützter Akkus möglich Möglichkeit geschützte Akkus zu benutzen Schutz vor versehentlichem Einschalten Farbige Batteriezustandsanzeige Anzeige eines niedrigen Ladezustands Lieferumfang: Taschenlampe 18650 Li-Ion Batterie 3.500 mAh Magnetisches-USB-Ladegerät Halte-Clip Holster mit Gürtelschlaufe 2 Ersatz-O-Ringe Benutzerhandbuch AnwendungshinweisFür weitere Anwendungsinformationen beachten Sie bitte das Produktdatenblatt  

VIKING PRO XHP50 by ARMYTEK This light belongs in every hunter's backpack. Solid housing with 1" standard housing diameter, fits most underbarrel mounts. It is a powerful and robust tactical torch with all-round light pattern. Additional accessories, such as colour filters and cable remotes, have been designed to allow the torch to be used in a wide range of conditions. - Luminosity up to 1,800 OTF lumens.- Light range up to 370 m.- Up to 200 days runtime with a 18650 Li-Ion battery. Light and Optics Colour temperature: White Maximum output (LED lumen): 2,300 lm LED : XHP50 Optics : Smooth reflector (SMO) Maximum output (OTF lumens): 1,800 lm Light range, metre: 286 m Central field of light: 10 Lateral spread: 80° Operating modes: Number of modes: 9 Running time in highest light level: 1h Running time in lowest light level: 200 days Dimensions and weight Head diameter: 25.4 mm Case diameter: 41 mm Length: 154 mm Weight (without battery): 126 g Housing Max. Immersion depth: 50 m Max. Drop height: 30 m Working range: -25..+40 °C ElectronicsCompatibility with power sources: 1x18650 Li-Ion / 2x18350 Li-Ion / 2xR123 Li-Ion / 2xCR123A Protection against accidental switch-on Coloured battery level indicator Low charge indicator Scope of delivery: Holster with belt loop Carrying clip Hand strap Compat ring made of rubber Spare cap for switch 2 spare sealing rings Operating instructions Battery not included in delivery! (2x18350 Li-Ion available here in the shop) Application noteFor further application information please refer to the product data sheet

Wizard C2 - CLASSIC ARMYTEK WITH IMPROVED FEATURES AND NEW DESIGN. The Wizard C2 is the revised version of Armytek's first multifunction lamp.Suitable for anyone who needs a lamp with a standard selection of light modes and the simplest possible operation.The light intensity of this model reaches 1200 lumens at a distance of up to 108 metres. The 18650 Li-ion battery with a capacity of 3200 mAh is charged in the lamp via a special magnetic USB cable. The universal Wizard C2 offers various mounting options: on metallic surfaces via the magnet in the rear cover, on clothing, belts or bags via clip, on the head via a comfortable headband.The Wizard C2 is compatible with the bicycle mount ABM-01 and the helmet mount AHM-02. Light and optics Colour temperature: White / Warm White LED : Samsung LH351D Optics : TIR Luminous flux, lumen: 1200 lm / 1120 lm Luminous range, metre: 108 m Brightness stabilisation : Digital (CPU brightness control) Central light field:Lateral spread: 70°:120° Operating modes Number of modes: 6 Running time in highest light level: 2 h 45 min (580 lm after 4 min) Running time in lowest light level: 200 d Strobe mode: Dimensions and weight Head diameter: 33 mm Housing diameter: 20.4 mm Length: 112 mm Weight (without battery): 64 g Housing Material : Aircraft-grade aluminium Anti-slip coating : Premium type III hard anodizing 400HV Protection class against ingress of dust and water : IP68 Max. Immersion depth : 10 m Max. Drop height : 10 m Working range: -25..+40 °C Electronics Compatibility with power sources: 1x18650 Li-Ion Possibility to use unprotected batteries Possibility to use protected batteries Protection against accidental switch-on Coloured battery status indicator Indication of low charge level Scope of delivery: Torch 18650 Li-Ion battery 3200 mAh Magnetic USB charger Headband holder Retaining clip 2 spare O-rings User manual Application noteFor further application information, please refer to the product data sheet  

ARMITEK WIZARD C2 PRO Cold white (white light) 5500k The ideal solution for those who need a multifunctional torch for all applications: Outdoor activities and sports, fishing and hunting, repair and assembly. Multifunctional torches from Armytek Wizard have become popular with runners, mountaineers, fishermen, hunters, car mechanics, industrial workers and other specialists around the world. HEADBAND LAMP:Easy one-hand operation, reliable headband attachment for joggers. Non-dismountable housing without long cables, unreliable rubber connectors and superfluous blocks. The torch is easy to mount, detach and rotates 180°. Mounting Quick-release rubber ring provides additional fixation TORCH FOR YOUR EVERYDAY LIFE:Compact body, convenient side button, special brushed anodised finish with no sharp knurling, strong built-in magnet and reliable steel clip, and constant light with no flickering. BICYCLE LIGHT:Made of hardened aluminium, sturdy quick-release holder included in the set: Powerful electronics ensure an impressive 2500 lumens of luminous flux and a record 200 days of operation in firefly mode Completely water-, dirt- and dust-proof - the torch still works in a water depth of 10 metres Comfortable wide beam TIR optics, scratch resistant tempered glass with brightening coating Innovative technology allows the use of any 18650 battery and provides full short-circuit protection even in case of magnetic contact with    metal objects Active real-time protection against overheating above 58 °C and low battery warning indicator Multi-colour high temperature and battery status indicator, which has been in use for 25 years, helps locate the torch in the dark Three turbo modes for different purposes. Turbo3 with maximum brightness 2,500 lumens for illuminating large areas for short periods. Turbo2 with 1,750 lumens for super bright light for a few minutes. Turbo1 with 870 lumens for comfortable long-term use Scope of delivery: TorchBattery 18650 Li-Ion 3,500 mAhMagnetic USB chargingHeadband holderMounting clipBicycle mount ABM-01Spare sealing ringsUser manual 

Universal Auxiliary Headlight Brackets for the New Defender Proper off-road vehicles aren’t really complete without additional front lights – on off-road tracks, in bad weather or on overland routes you simply can’t do without extra lighting. The new Defender has everything a heavy duty 4x4 needs, but the stylish body isn’t made for easily attaching extras like additional off-road lamps. Our versatile front light holders for the new Landy are specifically designed to easily mount off-road lights like our Vision-V GEN2 to the front of your L663 – most importantly, without any damage to the beautifully styled radiator grille. The holders are powder-coated in black and can be attached to the front grille in the exact position you require. The perfect fit is achieved by inserting the holder’s four lugs into the grille’s grid and fastening the unit by tightening the screw on the stainless-steel clamping plate. This creates a perfect fit and prevents the lights from moving or scratching the grille. Mounting the holders is a question of minutes and can be done entirely from the outside. The off-road light holders come in pairs.  

Our specially made stainless steel headlight bezels once and for all end the dreaded rust problem of the original Defender mounting rims. Suitable for all halogen, clear glass, and LED main Defender headlights by producers like J.W.Speaker, BMAC, Hella, Nolden, Vision-X, Truck-Lite, Wipac, or Sirius. Price is for one pair. Also available in black powder coated - a perfect mix of understatement and technical state of the art! If you work on your lights, why not get the stainless fitting equipment, too.

This bundle consists of 1 x NOLDEN LED work light / reversing light (optionally with 500 or 1,000 lumens)1 x protective grille for Nolden work lights / reversing lights

Cabin lights for all Land Rover Defender 90/110/130, as a replacement for the original. Also suitable for the second row in combination with our dome light console (Product code: TFDRC). This is a high-quality OEM part, manufactured by Land Rover.

Better visibility at night Improve visibility at night by upgrading your Land Rover's standard headlights to a better halogen headlight. suitable for:LAND ROVER DEFENDER 90/110/130 LHD Clear lenses and a profiled reflector on the back provide brilliant lighting. Scope of delivery:1 pair (2 pcs) with E-marking PLEASE NOTE: H4 bulbs are NOT included! 

How much time can you waste with burnt out bulbs in a Defender’s signal lamps? Turn signals, brakes, reverse or parking lights – something’s always not working or failing precisely when you’re taking the car in for inspection or you desperately need them to work in darkness and poor weather. Upgrading to an LED light kit is one of the quickest, cheapest and safest improvements you can achieve on a Landy. Big results for little effort. Before owners of older Defenders can improve their lot with this life-changing modification, they first need to install our Econoseal plug set for all Tdi Landies. Eight 2-pin and two 3-pin plug&play connectors for the LED’s make your life and your 4x4’s maintenance that much easier.

Features: License plate bracket, which makes it easier to install driving lights in the front of the vehicle. Double function: license plate holder + headlight holder Compatible with all lights in the driving light series Technical specifications:Material: aluminum

Fitting Kit Headlight for Land Rover Defender, stainless steel Fitting kit for one headlight for Land Rover Defender, consisting of stainless steel screws and anti-seize paste.

Fitting Kit Headlight Land Rover Defender Fitting kit for one headlight for Land Rover Defender, consisting of screws and small parts.