Fast dispatch
Individual counselling
Rapid processing of enquiries
Technical advice: +49 9181 466 644
Go to homepage
Wishlist
Shopping cart €0.00*
Show all categories Miscellaneous Back
Zur Händlerkarte

Ähnliche Artikel

slide 7 to 9 of 4
Nakatanenga folding console for Land Rover Defender 90/110/130
Nakatanenga folding console for Land Rover Defender 90/110/130
The vehicle seat in the Land Rover Defender can be easily folded backwards with this folding console, thus providing access to the battery and the electrical components located under the seat.   All seats with 405 mm track spacing, e.g. Scheelmann, König, Recaro etc., can be fitted. The original running rails of the Defender are still used and retain their function without restriction. They are attached to the original points on the running rails using the mounting kit supplied. The folding console is also a seat rail extension by approx. 35 mm, a combination with our seat rail extensions is not advisable (although technically feasible).   These seat consoles are made of ceramic-blasted stainless steel. The height of the console is 31 mm at the front and 61 mm at the rear.   Scope of delivery: 1 set for 1 seat   Translated with www.DeepL.com/Translator (free version)
Product number: KLKO-LM
Weight: 3,0 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

From €139.00*
Select version
Conversion kit for bulkhead, New Defender
Conversion kit bulkhead Land Rover New Defender 90/ 110
Bulkhead conversion kit Removing the full height bulkhead from the L663 Defender 90 and 110 'hardtop' is a popular modification, but when the factory bulkhead is removed from the vehicle, the area behind the seats looks raw and unfinished.The Bulkhead Delete Kit cleans up the front edge of the cargo area and the trim area behind the seats to create a sleek OEM interior when the bulkhead has been removed from an L663 Defender Hardtop.The partition removal kit's molded, raised lip creates a raised mini-partition that prevents objects in the rear of the vehicle from falling into the cavity behind the front seats and/or damaging the seat backs.With the partition removed, the interior of your Defender Hardtop suddenly feels lighter and airier. Items in the rear of the vehicle are easier to reach and you can adjust the seats over a wider range.The Bulkhead Delete Kit can be installed in around 30 minutes and it has been designed to utilize the existing mounting points, meaning no modifications need to be made to the interior of your Defender. This design feature also means that the installation is fully reversible at a later date. The installation kit includes 3D printed blanking plugs to cover the empty M6 fixing holes where the bulkhead brackets were attached to the B-pillar.Disclaimer: The L663 Partition Removal Kit is not intended to provide structural strength or any form of personal protection to occupants from a shifting load. It is the owner's responsibility to secure all loose items in the rear of the vehicle. Note: We are already developing a perfectly matching net as a partition wall.
Product number: BHRB-NEWDEF-110M
Weight: 2,6 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

From €474.00*
Select version
Td5, splashback
Bulkhead for Land Rover Defender, material: Stainless steel
The bulkhead is pretty much the most complex body part in a Landy – and one of the most vulnerable components, too. For one, it’s sporting many edges, corners, folds, curves and rivet connections and requires a considerable number of screw holes: to the frame, to the connections in the engine bay and to the windshield. Add to that a whole bunch of openings for steering, pedals, air and electrics and you see the problem. All this structural complexity combined with its positioning exposes the bulkhead to water splashing up from below or trickling down from above. Dirt and chemicals collect in the nooks and crannies and trap moisture almost permanently. On the inside of the cabin condensation or leaks can produce the same effect behind the dashboard, panels or floor mats, thereby creating constant moisture exposure from both sides. No wonder, that the bulkhead is one of those components that suffer most from visible or hidden corrosion. Over time, it can even affect the frame. In case you are tired of piecemeal patch jobs on your Td5’s or 300Tdi’s rusty bulkheads or you are contemplating a proper restauration anyway, we can offer you a complete, primer-coated high-quality bulkhead, made in the EU.Material: Stainless steel
Product number: SPRITZWAND-TD5M
Weight: 50,0 kg
Freight forwarding
Available from stock - delivery time 1-3 working days

From €2,955.00*
Select version

Das könnte Sie auch interessieren

slide 1 of 1
Repair plate rear tub, 3 pieces, Defender 110 - My 2007-2016
Repair plate rear tub, 3 pieces, Defender 110 Td4, Td5 and TDI
Repair panel rear sump for Defender 110 Td4, Td5 and TDI Rust thrives best when it is hidden, especially when corners, angles or edges favour the constant accumulation of water and damp dirt. This is why Defender 110 Station Wagons often have hidden rust spots under the rear seat bench mount or on the frame holder. To avoid having to replace the entire base plate of the rear tub in the event of advanced contact corrosion, we now offer an exclusive, easy-to-fit repair kit for the particularly susceptible area under the seat bench. The kit consists of the main plate, two side parts and sufficient rivets. For installation (see pictures), the existing welding points on the rear tub are first drilled out. The sheet metal is then simply positioned accordingly, glued in place with body sealant and fixed at the sides with clamps. Once dry, drill the sheet metal at the pre-drilled welding points and insert the rivets. The two side panels are then attached in the same way. Please select: Complete set 3 pieces consisting of:  Repair plate main part and 2x corner parts 2-piece set consisting of: 2x corner pieces  
Product number: REPBLEHEWAM
Weight: 2,0 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

From €69.00*
Select version

Bulkhead Removal Bar for Land Rover Defender 90ST / 110HT

slide 2 of 8

€199.00*

Prices incl. VAT; plus shipping costs / Parcel shipping

↪️ allowing you to lean back further ✔️ best quality ✔️ fast shipping

Available from stock - delivery time 1-3 working days

Product number: BHRB-DE
Weight: 7.4 kg

Maximize Comfort and Space in Your Land Rover Defender 90ST or 110HT with the Nakatanenga Bulkhead Removal Kit

For many Land Rover Defender drivers, the legendary vehicle is more than just a means of transport – it's a statement, an adventure companion, and a loyal partner off-road. However, especially on longer tours or for taller individuals, the space in the cabin of the Defender 90ST (Station Wagon) and 110HT (Hardtop) models with the factory-fitted bulkhead can reach its limits. Nakatanenga, your specialist for high-quality off-road accessories, offers the ideal solution for this: a well-thought-out bulkhead removal kit.

More Legroom and an Optimized Seating Position

The main advantage of the Nakatanenga bulkhead removal kit is the significant gain in comfort. By modifying or partially removing the bulkhead, which is located directly behind the front seats, it becomes possible to recline and move the seats further palavras-chave. This results in noticeably more legroom and allows for a more relaxed and ergonomic seating position. Drivers and passengers over 1.80 m (approx. 5'11") tall will particularly appreciate this difference.

An Airier Feel and Improved Access to the Cargo Area

In addition to the extra legroom, the bulkhead modification also creates a more open and airy feel in the front of the vehicle. The separation between the driver's cabin and the cargo area, often perceived as somewhat restrictive, is opened up. This also facilitates quick access to items transported in the rear of the vehicle.

Well-Engineered Design for Stability and Safety

The Nakatanenga removal kit is designed to continue to ensure the necessary stability of the vehicle body. The kit includes a sturdy bar that partially takes over the original function of the bulkhead in terms of stiffening the body. This way, the structural integrity of your Defender is maintained even after the conversion. Delivery includes high-strength mounting hardware.

Easy Installation and High-Quality Materials

Nakatanenga places great emphasis on precisely fitting components and the simplest possible installation. The kit is designed to be mounted on existing attachment points, which reduces the installation effort. The components themselves are made of powder-coated steel to guarantee durability and resistance even under demanding off-road conditions.

Nakatanenga – Your Partner for Defender Optimizations

As a recognized specialist for Land Rover accessories, Nakatanenga offers a wide range of products designed to make your Defender even more capable, comfortable, and individual. The bulkhead removal kit for the Defender 90ST and 110HT fits seamlessly into this range and represents a sensible investment for any Defender owner who values more comfort and an optimized interior. Discover the possibilities of taking your Land Rover Defender to a new level with Nakatanenga accessories now.

The conversion kit is suitable for vehicles manufactured up to 2007.

Documents
Fast dispatch
Individual counselling
Rapid processing of enquiries
Technical advice: +49 9181 466 644
This website uses cookies to ensure the best experience possible. More information...