Top seller
No results were found for the filter!
Rods for raising the New Defender with air suspension, from model year 2020 Coupling rod/ Rods for height adjustment Installing lift kits for 4x4’s usually requires complex (and expensive) modifications. Not so if your vehicle comes with a self-regulating air suspension, like the New Defender. Raising the ride...
Art.-Nr.: RODS-ND25
Shipping weight: 0,2 kg
Parcel shipping
Shipping weight: 0,2 kg
Parcel shipping
€99.00 *
In stock,
Delivery time appr. 1-3 business days
Terrafirma Homokinets for reinforced heavy duty thru axles, Defender front axle from 1994 onwards WITHOUT ABS Heavy Duty CV Joints without ABS from 1994 onwards suitable for : Land Rover Defender 90/110/130 Land Rover Discovery 1 Range Rover Classic Previous part numbers for this part: KAM311. Application Table Category Power: Engines All Fuel:...
Art.-Nr.: TF2005
Shipping weight: 3,5 kg
Parcel shipping
Shipping weight: 3,5 kg
Parcel shipping
€349.00 *
In stock,
Delivery time appr. 1-3 business days
Repair kit homokinet Defender TDi / TD5 with and without ABS Repair kit for the homokinet on the front axle suitable for TDi / TD5 Construction year 2006 with and without ABS Scope of delivery: 1 pc (for 1 bike!) We recommend an exchange on both sides!
Art.-Nr.: NA-DA6059
Shipping weight: 4,5 kg
Parcel shipping
Shipping weight: 4,5 kg
Parcel shipping
€99.00 *
Delivery time ca. 20-25 business days
Compressor for air suspension Compressor for air suspension Suitable for Discovery 4 BJ2010-2016 and Range Rover Sport BJ2010-2013
Art.-Nr.: LR072537R
Shipping weight: 9 kg
Parcel shipping
Shipping weight: 9 kg
Parcel shipping
€545.00 *
Delivery time ca. 20-25 business days
Nakatanenga Heavy-duty 24 Spline Front axle Shaft with CV Joints and HD Drive Flanges This kit consists of two half shafts, two CV joints and two heavy-duty drive flanges. The Raptor Heavy Duty front shafts are made from SAE4340 Nickel Chromoly alloy steel, that provide the optimum level of strength and flex when...
Art.-Nr.: HSVOKIT
Shipping weight: 9 kg
Parcel shipping
Shipping weight: 9 kg
Parcel shipping
€1,329.00 *
In stock,
Delivery time appr. 1-3 business days
Nakatanenga Heavy-duty 24 Spline Rear Half Shaft with HD Drive Flanges This kit consists of two half shafts and two heavy-duty drive flanges. The Raptor Heavy Duty rear shafts are made from SAE4340 Nickel Chromoly alloy steel, that provide the optimum level of strength and flex when heat-treated. They have...
Art.-Nr.: HSHIKIT-P38
Shipping weight: 9 kg
Parcel shipping
Shipping weight: 9 kg
Parcel shipping
From €618.00 *
In stock,
Delivery time appr. 1-3 business days
Track Rod and Drag Link - set heavy duty Track Rod and Drag Link - set heavy duty Set of steering track rod and drag link with three greasable heavy duty track rod ends. Fits all Land Rover Defender from MY1986 until today (incl. Td4).
Art.-Nr.: TRHDDESET
Shipping weight: 11 kg
Parcel shipping
Shipping weight: 11 kg
Parcel shipping
€257.00 *
In stock,
Delivery time appr. 1-3 business days
Terrafirma Heavy Duty Track Bar / Panhard Rod, adjustable Heavy Duty adjustable track bar / Panhard rod for Land Rover Defender, Discovery 1 and Range Rover Classic, to align axle when fitting a body lift. Available either for vehicles up to MY2002 or from MY2003. Please choose required model...
Art.-Nr.: TFTB-253
Shipping weight: 4 kg
Parcel shipping
Shipping weight: 4 kg
Parcel shipping
From €270.00 *
Delivery time ca. 20-25 business days
Terrafirma Steering Damper Return-to-Centre Terrafirma Steering Damper Return-to-Centre Steering damper for Land Rover Defender 90/110/130, mounts to original mounting points, assists in self-return of steering.
Art.-Nr.: TF835
Shipping weight: 3,1 kg
Parcel shipping
Shipping weight: 3,1 kg
Parcel shipping
€136.00 *
Delivery time ca. 20-25 business days
Heavy Duty Prop Shaft - fron axle - with centred double joint and flange assembly, for Land Rover Defender Heavy Duty GKN Prop Shaft - front axle - with centred double joint and flange assembly, for Land Rover Defender. GKN double joint prop shaft, fits Defender 90/110/130, for Tdi and Td5 up to MY07, with flange assembly. This heavy duty...
Art.-Nr.: PSZDGDETD5HDFL
Shipping weight: 10,5 kg
Parcel shipping
Shipping weight: 10,5 kg
Parcel shipping
€1,224.00 *
In stock,
Delivery time appr. 1-3 business days
Heavy Duty Front Prop Shaft with centred double joint for Defender 90/110/130, Td4 from MY07 Heavy Duty GKN Prop Shaft - front axle - with centred double joint and flange assembly for Defender 90/110/130, Td4 from MY07. This heavy duty prop shaft is recommended for vehicles with body lift or as a replacement for a failed prop...
Art.-Nr.: PSZDGDETD4HDFL
Shipping weight: 10,5 kg
Parcel shipping
Shipping weight: 10,5 kg
Parcel shipping
€1,224.00 *
In stock,
Delivery time appr. 1-3 business days
Cranked trailing arms Cranked trailing arms, rear, for Land Rover Defender 90/110/130, pair, incl. bushes on axle side, black powder-coated.
Art.-Nr.: NABRADEF
Shipping weight: 6 kg
Parcel shipping
Shipping weight: 6 kg
Parcel shipping
€325.00 *
In stock,
Delivery time appr. 1-3 business days
Side wheel bearing Rover or P38 Differential New side wheel bearings are needed for P38 or Rover axles when fitting a diff-locker (Detroit or TrueTrac). They are not needed for Salisbury axles. Please order two. We supply quality bearings from OE manufacturers like e.g. Timken.
Art.-Nr.: NA-RTC3095OE
Shipping weight: 0,5 kg
Parcel shipping
Shipping weight: 0,5 kg
Parcel shipping
€25.00 *
In stock,
Delivery time appr. 1-3 business days
Steering Damper Heavy Duty for Land Rover Defender Steering Damper Heavy Duty for Land Rover Defender
Art.-Nr.: LDS-GA-DEF
Shipping weight: 3 kg
Parcel shipping
Shipping weight: 3 kg
Parcel shipping
€90.00 *
In stock,
Delivery time appr. 1-3 business days
HD Drive Shaft Member - Spline Hub HD Drive Shaft Member - Spline Hub Heavy-duty spline hub with hub cap and seal. This heavy duty hub replaces the LR-Art. RUC105200 for Defender 90/110/130 -ships in pairs-
Art.-Nr.: FLHDN
Shipping weight: 2 kg
Parcel shipping
Shipping weight: 2 kg
Parcel shipping
Content 2 Stück
€99.00 *
In stock,
Delivery time appr. 1-3 business days
Shock Mount for Land Rover Defender, rear axle, top Shock mount for Land Rover Defender, rear axle, upper Lowering of 15-90 mm available, shipps in pairs. --Please select degree of lowering--
Art.-Nr.: DDHAO-15
Shipping weight: 2,8 kg
Parcel shipping
Shipping weight: 2,8 kg
Parcel shipping
€149.00 *
current delivery time approx. 5-8 working days**.
Dual Shock Mount, rear Axle Dual shock mount, rear, bottom. The mount needs to be welded to the axle. --pair--
Art.-Nr.: DD-HA-U
Shipping weight: 2 kg
Parcel shipping
Shipping weight: 2 kg
Parcel shipping
€29.00 *
In stock,
Delivery time appr. 1-3 business days
LIft Kit Discovery II +50mm Complete set, front, and rear axle. Fits the spring and air suspension. The scope of shipment includes hardware and linkage, but we recommend having the senors calibrated at your local Land Rover Dealership instead of using the linkage....
Art.-Nr.: D2LK50-L
Shipping weight: 5 kg
Parcel shipping
Shipping weight: 5 kg
Parcel shipping
€320.00 *
Delivery time 10-15 business days
Spring cones rear axle for Land Rover Defender 110/130 Spring cones rear axle suitable for Defender 110/130 Spring cones return the spring "cleanly" when the travel of the shocks is longer than that of the springs, Spring cones fit original springs or Trekfinder springs. Whether this item...
Art.-Nr.: CO-HA-110
Shipping weight: 4,2 kg
Parcel shipping
Shipping weight: 4,2 kg
Parcel shipping
€99.00 *
Delivery time 90 business days
CASTER CORRECTED SWIVEL BALLS, 3° For cast correction with lift kits from 60 mm, for all Land Rover front axles with 7-hole flange (Defender, Discovery I, RRC) OEM swivel balls! The hole pattern is milled by us using CNC-machines. These CASTER CORRECTED SWIVEL BALLS...
Art.-Nr.: CCSWB3
Shipping weight: 6 kg
Parcel shipping
Shipping weight: 6 kg
Parcel shipping
€579.00 *
Delivery time 20-25 business days
A-Frame Ball Joint, 45° operating range, for Land Rover Defender, Discovery and RRC A-frame ball joint with 45° operating range, for improved rear axle articulation, suitable for Land Rover Defender 90/110/130, Discovery and Range Rover Classic. This A-frame ball joint replaces the standard ball joint and offers greatly...
Art.-Nr.: AFBJ45
Shipping weight: 3,1 kg
Parcel shipping
Shipping weight: 3,1 kg
Parcel shipping
€164.00 *
In stock,
Delivery time appr. 1-3 business days
Heavy Duty Prop Shaft - replacement universal joint Replacement universal joint for heavy duty propshaft with 25° articulation angle. All spare parts available off the shelf. Made in Germany!
Art.-Nr.: WWGWXXKG
Shipping weight: 1 kg
Parcel shipping
Shipping weight: 1 kg
Parcel shipping
€129.00 *
In stock,
Delivery time appr. 1-3 business days
Heavy duty front prop shaft with 25° articulation angle - front axle - for Defender 90/110/130 Td5/Tdi Heavy duty front prop shaft with 25° articulation angle. Heavy duty greasable universal joints. Triple sealed sleeve with 110 mm travel. 60 mm tubing. All service parts availbale off the shelf. This prop shaft fits all Defender...
Art.-Nr.: WWGWDEFVA
Shipping weight: 10,5 kg
Parcel shipping
Shipping weight: 10,5 kg
Parcel shipping
€659.00 *
In stock,
Delivery time appr. 1-3 business days
Heavy duty front prop shaft with 25° articulation angle - front axle - Defender 90/110/130 Td4 from MY07 Heavy duty front prop shaft with 25° articulation angle. Heavy duty greasable universal joints. Triple sealed sleeve with 110 mm travel. 60 mm tubing. All service parts availbale off the shelf. This prop shaft fits front axles on all...
Art.-Nr.: WWGWDEF-TD4VA
Shipping weight: 10,5 kg
Parcel shipping
Shipping weight: 10,5 kg
Parcel shipping
€659.00 *
Delivery time ca. 5-10 business days
