Fast dispatch
Individual counselling
Rapid processing of enquiries
Technical advice: +49 9181 466 644
Go to homepage
Wishlist
Shopping cart €0.00*
Show all categories Ventilation Grilles and Wind Deflectors Back
Zur Händlerkarte

Ähnliche Artikel

slide 6 to 8 of 6
Mounting plate air inlet for CB antenna fixed mounting, for right-hand drive (RHD)
Mounting plate air inlet for CB antenna fixed mounting, for right-hand drive (RHD)
Mounting plate air intake for CB radio antennas, Land Rover Defender, for right-hand drive (RHD) This mounting plate ensures optimum mounting of a CB antenna on the air intake of the Land Rover Defender. For this purpose, the mounting plate is installed on the right-hand (as seen from the driver's seat) ventilation grille / air intake. For left-hand drive vehicles, you can find the mounting plate here in our shop. As the Defender is made of aluminium, unfortunately no magnetic antenna base will hold. We have therefore designed a plate made of sheet steel with a suitable opening for the cable. This plate allows you to attach an antenna with a magnetic base, which you can easily remove if necessary.  Scope of delivery: - Mounting plate - 1 m ground cable - Mounting material
Product number: ALCB-F-RHD
Weight: 1,0 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

€69.00*
%
VOX microphone 4-pole version 2
VOX microphone 4-pole plug Version 2.0
The CB-radio VOX microphone offers the perfect solution for hands-free communication in any vehicle, following § 23 (1a) of the German road traffic regulations. This paragraph outlaws the usage of handheld microphones since the 01.07.2020. This microphone can be used with almost all CB-radios on the market to date. It comes with active noise canceling to filter out any background noise, to guarantee clear communication. The battery lasts about 60h and can charge while in use. Details: hands-free communication, following § 23 (1a) of the German road traffic regulations. This paragraph outlaws the usage of handheld microphones since the 01.07.2020 active noise canceling, eliminating irritating background noises VOX sensitivity adjustable in 4 levels VOX delay adjustable in 4 levels impedance: 4.7K ohm sensitivity: -58db 3000mAh battery (rechargable) 60h battery life micro-USB charging port Up/Down button plug: 4-point connector Scope of delivery:VOX microphone, instructions, USB charging cable Compatible with:Midland M10, Midland M Zero Plus, Alan 100 Plus B, diverse Präsident Geräte, Lavayette, etc.
Product number: NA42130
Weight: 0,6 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

€37.00* €49.00* (24.49% saved)
%
CB radio VOX microphone
CB-Radio VOX Microphone
The Albrecht CB-radio VOX microphone offers the perfect solution for hands-free communication in any vehicle, following § 23 (1a) of the German road traffic regulations. This paragraph outlaws the usage of handheld microphones since the 01.07.2020. This microphone can be used with almost all CB-radios on the market to date. It comes with active noise canceling to filter out any background noise, to guarantee clear communication. The battery lasts about 60h and can charge while in use Details: hands-free communication, following § 23 (1a) of the German road traffic regulations. This paragraph outlaws the usage of handheld microphones since the 01.07.2020 active noise canceling, eliminating irritating background noises VOX sensitivity adjustable in 4 levels VOX delay adjustable in 4 levels impedance: 4.7K ohm sensitivity: -58db 3000mAh battery (rechargable) 60h battery life micro-USB charging port Up/Down button plug: 4-point connector Scope of delivery:VOX microphone, instructions, USB charging cable Compatible with:Midland M10, Midland M Zero Plus, Alan 100 Plus B, diverse Präsident Geräte, Lavayette, etc.
Product number: NA42120
Weight: 0,6 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

€37.00* €49.00* (24.49% saved)

Das könnte Sie auch interessieren

slide 7 to 9 of 4
Albrecht Racer 90 mobile antenna, 115 cm
Albrecht Racer 90 mobile antenna, 115 cm
This CB mobile antenna scores with good SWR values - the fine-tuning of the SWR values is done by rings. Technical data: CB mobile antenna 1/4 lambda 120 channels Power rating: 40 watts Material: Stainless steel SWR Adjustable YES Length: 115 cm Cable length: 4 metres For fixed mounting The antenna has a cable with an open end to make it easier to lay the cable. For connection to a radio, you still need a PL259/6 plug for RG58 coaxial cable.
Product number: NA67130
Weight: 2,5 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

€59.99*
Alan Funk 90 CB antenna for fixed mounting
Alan Funk 90 CB antenna for fixed mounting, length approx. 90cm, 200W, 4m cable with DV connector
Radio 90 CB antenna for fixed mounting Technical data:  Length approx. 90 cm 200 W 4 m cable with DV plug 1/4 lambda The antenna has an open-ended cable to make it easier to lay the cable. A PL259/6 plug for RG58 coaxial cable is required for connection to a radio.
Product number: NA63804
Weight: 3,5 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

€87.90*
Alan radio 150 CB antenna for fixed mounting
Alan radio 150 CB antenna for fixed mounting
The 1/4 lambda antenna is easy to mount and offers a wide bandwidth incl. DV connection. It consists of a stainless steel radiator with flux points and a wing nut. The standing wave ratio is preset and can be changed by changing the radiator length. Mounting instructions: Drill a hole with a diameter of 12 mm at a point on the vehicle body.Deburr the hole and ensure a good conductive connection of the antenna flux.Then insert the antenna base from the outside of the body into the hole so that the corrugated side of the antenna joint faces the outside of the vehicle. Fit the plastic washer and the metal trident washer the right way round. Fit the toothed washer and screw on the nut loosely After aligning the base, tighten the nut on the inside of the body with a spanner Screw on the angle plug with the antenna cable (tip: seal with silicone to permanently seal the mounting point against rust) Mount the radiator with the threaded bolt on the antenna base Technical data: Frequency: MHz 26-28 Type: 1/4 Lambda Power rating: 300 W Radiator length: 130 cm Steel material: Stainless steel SWR Adjustable - SWR adjustment via length change: SWR preset Special features: Plug type DV Total length with base: 138 cm The antenna has a cable with an open end to make it easier to lay the cable. For connection to a radio set you still need a PL259/6 plug for RG58 coaxial cable.
Product number: NA63806
Weight: 3,1 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

€92.99*

Mounting plate air inlet for CB antenna Land Rover Defender, for left-hand drive (LHD)

slide 2 of 6

€69.00*

Prices incl. VAT; plus shipping costs / Parcel shipping

↪️ mounting plate for CB antenna LR Defender air intake ✔️ quick installation ✔️ incl. mounting hardware ✔️ best quality ✔️ fast shipping

Available from stock - delivery time 1-3 working days

Set
Product number: ALCB-M
Weight: 2.1 kg

Mounting plate for CB antennas on Land Rover Defender, for left-hand drive (LHD)

This mounting plate optimally attaches a CB antenna to the air intake of the Land Rover Defender. For this purpose, the mounting plate is installed on the left (as seen from the driver's seat) ventilation grille / on the air inlet. For right-hand drive vehicles (UK), please contact us by phone or e-mail. Please select the suitable variant for you: fixed mounting or as a magnet.

Delivery:

  • mounting plate
  • 1 m ground cable
  • mounting material
Fast dispatch
Individual counselling
Rapid processing of enquiries
Technical advice: +49 9181 466 644
This website uses cookies to ensure the best experience possible. More information...