Corner protector for Defender seat box The edge of the Defender seat box is susceptible to damage and sometimes looks quite pitted and unsightly after a while. With these elegant corner protectors, you can spruce up the seat box and protect it at the same time!Made of 3 mm black metal and CNC-milled to the highest precision. With the help of a cordless screwdriver and the included fastener, the corner protectors are attached in less than 5 minutes! The kit contains a pair of corner protectors and 12 pcs. 8x19 mm steel screws. The corner protectors also fit a Series 2 and 3, but require a matching hole to allow the seat rail to be attached.Scope of delivery: One pair of corner protectors incl. fixing material. Illustrations may differ.

Wide angle stainless steel second row door stay brackets for Defender 110/130 CC Wide angle stainless steel second row door stay brackets for Defender 110 and 130 CC rear doors. Allow to open the door further (up to  95°). This does not only make entering and leaving the rear seats easier, also gives more access for drawers if rear bench is not fitted, e.g. for a cooler (we can make such drawers to order!). Also without any additional rear furniture loading is greatly facilitated. DIY fitting possible! Only takes a few minutes, the supplied fitting instrucions leave no questions open! No drilling of additional holes, bracket fits to original mountings. Set (for two doors) is supplied with stainless steel fixings, washers, anti-seize copper paste and fitting instructions. The kit fits all MY Defenders  (TDi, TD5, TD4).

Convenient rear door damper prevents the door from closing unintentionally Conversion kit for all Land Rover Defender 90 / 110 models up to MY2001 with rear door. Replaces the old adjuster with a specially designed soft-stop gas strut that slows the rate of travel as it reaches the end of its stroke. Keeps the door securely open, also with our rear crossmember spare wheel carrier. This is the improved version with the following added features: all fittings are stainless steel re-designed body tub bracket improved geometry - the gas strut can't be destroyed by accidental wrong fitting gast strut exclusively designed for us - changed characteristic curve, improved sealing for use in dusty conditions and soft-stop feature supplied with revised fitting instructions

No More Slamming Rear Doors: The Nakatanenga Rear Door Damper 2.0 for Your Defender (from MY 2002)! Sound familiar? An unguarded moment, a gust of wind, or a slight incline, and the heavy rear door of your Land Rover Defender slams shut. This is not only annoying but can also be dangerous or damage the door in the long run. Specifically developed for all Defender models from 2002 onwards with a rear door, this conversion kit ensures a gentle, controlled opening and securely holds your rear door open. It replaces the standard door stay with a special gas strut featuring a soft-stop function, which reliably keeps the door open. The damper also works reliably when our spare wheel carrier for the rear crossmember is mounted. These are your advantages with the Rear Door Damper 2.0: Gentle Opening of the Rear Door: No more slamming shut! The damper gently catches the door and reliably holds it open. Keeps the Door Securely Open: Even on a slight incline or in wind, your rear door stays in the desired position – ideal for loading and unloading. Increased Safety: Prevents the door from slamming shut unintentionally and protects you and others from injuries. Easy on Material and Your Nerves: Less stress on door hinges and lock, and significantly more comfort in everyday use. High-Quality Materials: Manufactured for a long service life and reliable function, even under demanding conditions. Perfect Fit for Your Defender: Developed for all Land Rover Defenders from 2002 onwards (Td4 and later Td5 models with the newer rear door variant). Easy Installation: Installation is straightforward and can be done in just a few simple steps. The Nakatanenga Rear Door Damper 2.0 is a small component with a big impact that you won't want to miss in your daily use of your Defender. It makes your life easier, whether you're shopping, traveling, or in tough off-road use. Technical Description of the Damper: All mounting parts are made of stainless steel. The well-thought-out linkage geometry of the body-side mounting bracket prevents incorrect installation. The gas strut used is manufactured exclusively for us with this precise characteristic curve – a special seal for use in dusty environments and a soft-stop on extension complete the excellent impression. An updated installation manual is included. Say "goodbye" to the slamming rear door! Get the Nakatanenga Rear Door Damper 2.0 now and enjoy the comfort!

Corner protector for Defender seat box The edge of the Defender seat box is susceptible to damage and sometimes looks quite pitted and unsightly after a while. With these elegant corner protectors, you can spruce up the seat box and protect it at the same time!Made of 3 mm black metal and CNC-milled to the highest precision. With the help of a cordless screwdriver and the included fastener, the corner protectors are attached in less than 5 minutes! The kit contains a pair of corner protectors and 12 pcs. 8x19 mm steel screws. The corner protectors also fit a Series 2 and 3, but require a matching hole to allow the seat rail to be attached.Scope of delivery: One pair of corner protectors incl. fixing material. Illustrations may differ.

Wide angle stainless steel second row door stay brackets for Defender 110/130 CC Wide angle stainless steel second row door stay brackets for Defender 110 and 130 CC rear doors. Allow to open the door further (up to  95°). This does not only make entering and leaving the rear seats easier, also gives more access for drawers if rear bench is not fitted, e.g. for a cooler (we can make such drawers to order!). Also without any additional rear furniture loading is greatly facilitated. DIY fitting possible! Only takes a few minutes, the supplied fitting instrucions leave no questions open! No drilling of additional holes, bracket fits to original mountings. Set (for two doors) is supplied with stainless steel fixings, washers, anti-seize copper paste and fitting instructions. The kit fits all MY Defenders  (TDi, TD5, TD4).

Convenient rear door damper prevents the door from closing unintentionally Conversion kit for all Land Rover Defender 90 / 110 models up to MY2001 with rear door. Replaces the old adjuster with a specially designed soft-stop gas strut that slows the rate of travel as it reaches the end of its stroke. Keeps the door securely open, also with our rear crossmember spare wheel carrier. This is the improved version with the following added features: all fittings are stainless steel re-designed body tub bracket improved geometry - the gas strut can't be destroyed by accidental wrong fitting gast strut exclusively designed for us - changed characteristic curve, improved sealing for use in dusty conditions and soft-stop feature supplied with revised fitting instructions

No More Slamming Rear Doors: The Nakatanenga Rear Door Damper 2.0 for Your Defender (from MY 2002)! Sound familiar? An unguarded moment, a gust of wind, or a slight incline, and the heavy rear door of your Land Rover Defender slams shut. This is not only annoying but can also be dangerous or damage the door in the long run. Specifically developed for all Defender models from 2002 onwards with a rear door, this conversion kit ensures a gentle, controlled opening and securely holds your rear door open. It replaces the standard door stay with a special gas strut featuring a soft-stop function, which reliably keeps the door open. The damper also works reliably when our spare wheel carrier for the rear crossmember is mounted. These are your advantages with the Rear Door Damper 2.0: Gentle Opening of the Rear Door: No more slamming shut! The damper gently catches the door and reliably holds it open. Keeps the Door Securely Open: Even on a slight incline or in wind, your rear door stays in the desired position – ideal for loading and unloading. Increased Safety: Prevents the door from slamming shut unintentionally and protects you and others from injuries. Easy on Material and Your Nerves: Less stress on door hinges and lock, and significantly more comfort in everyday use. High-Quality Materials: Manufactured for a long service life and reliable function, even under demanding conditions. Perfect Fit for Your Defender: Developed for all Land Rover Defenders from 2002 onwards (Td4 and later Td5 models with the newer rear door variant). Easy Installation: Installation is straightforward and can be done in just a few simple steps. The Nakatanenga Rear Door Damper 2.0 is a small component with a big impact that you won't want to miss in your daily use of your Defender. It makes your life easier, whether you're shopping, traveling, or in tough off-road use. Technical Description of the Damper: All mounting parts are made of stainless steel. The well-thought-out linkage geometry of the body-side mounting bracket prevents incorrect installation. The gas strut used is manufactured exclusively for us with this precise characteristic curve – a special seal for use in dusty environments and a soft-stop on extension complete the excellent impression. An updated installation manual is included. Say "goodbye" to the slamming rear door! Get the Nakatanenga Rear Door Damper 2.0 now and enjoy the comfort!

Corner protector for Defender seat box The edge of the Defender seat box is susceptible to damage and sometimes looks quite pitted and unsightly after a while. With these elegant corner protectors, you can spruce up the seat box and protect it at the same time!Made of 3 mm black metal and CNC-milled to the highest precision. With the help of a cordless screwdriver and the included fastener, the corner protectors are attached in less than 5 minutes! The kit contains a pair of corner protectors and 12 pcs. 8x19 mm steel screws. The corner protectors also fit a Series 2 and 3, but require a matching hole to allow the seat rail to be attached.Scope of delivery: One pair of corner protectors incl. fixing material. Illustrations may differ.

Wide angle stainless steel second row door stay brackets for Defender 110/130 CC Wide angle stainless steel second row door stay brackets for Defender 110 and 130 CC rear doors. Allow to open the door further (up to  95°). This does not only make entering and leaving the rear seats easier, also gives more access for drawers if rear bench is not fitted, e.g. for a cooler (we can make such drawers to order!). Also without any additional rear furniture loading is greatly facilitated. DIY fitting possible! Only takes a few minutes, the supplied fitting instrucions leave no questions open! No drilling of additional holes, bracket fits to original mountings. Set (for two doors) is supplied with stainless steel fixings, washers, anti-seize copper paste and fitting instructions. The kit fits all MY Defenders  (TDi, TD5, TD4).

Convenient rear door damper prevents the door from closing unintentionally Conversion kit for all Land Rover Defender 90 / 110 models up to MY2001 with rear door. Replaces the old adjuster with a specially designed soft-stop gas strut that slows the rate of travel as it reaches the end of its stroke. Keeps the door securely open, also with our rear crossmember spare wheel carrier. This is the improved version with the following added features: all fittings are stainless steel re-designed body tub bracket improved geometry - the gas strut can't be destroyed by accidental wrong fitting gast strut exclusively designed for us - changed characteristic curve, improved sealing for use in dusty conditions and soft-stop feature supplied with revised fitting instructions

No More Slamming Rear Doors: The Nakatanenga Rear Door Damper 2.0 for Your Defender (from MY 2002)! Sound familiar? An unguarded moment, a gust of wind, or a slight incline, and the heavy rear door of your Land Rover Defender slams shut. This is not only annoying but can also be dangerous or damage the door in the long run. Specifically developed for all Defender models from 2002 onwards with a rear door, this conversion kit ensures a gentle, controlled opening and securely holds your rear door open. It replaces the standard door stay with a special gas strut featuring a soft-stop function, which reliably keeps the door open. The damper also works reliably when our spare wheel carrier for the rear crossmember is mounted. These are your advantages with the Rear Door Damper 2.0: Gentle Opening of the Rear Door: No more slamming shut! The damper gently catches the door and reliably holds it open. Keeps the Door Securely Open: Even on a slight incline or in wind, your rear door stays in the desired position – ideal for loading and unloading. Increased Safety: Prevents the door from slamming shut unintentionally and protects you and others from injuries. Easy on Material and Your Nerves: Less stress on door hinges and lock, and significantly more comfort in everyday use. High-Quality Materials: Manufactured for a long service life and reliable function, even under demanding conditions. Perfect Fit for Your Defender: Developed for all Land Rover Defenders from 2002 onwards (Td4 and later Td5 models with the newer rear door variant). Easy Installation: Installation is straightforward and can be done in just a few simple steps. The Nakatanenga Rear Door Damper 2.0 is a small component with a big impact that you won't want to miss in your daily use of your Defender. It makes your life easier, whether you're shopping, traveling, or in tough off-road use. Technical Description of the Damper: All mounting parts are made of stainless steel. The well-thought-out linkage geometry of the body-side mounting bracket prevents incorrect installation. The gas strut used is manufactured exclusively for us with this precise characteristic curve – a special seal for use in dusty environments and a soft-stop on extension complete the excellent impression. An updated installation manual is included. Say "goodbye" to the slamming rear door! Get the Nakatanenga Rear Door Damper 2.0 now and enjoy the comfort!