Fast dispatch
Individual counselling
Rapid processing of enquiries
Technical advice: +49 9181 466 644
Go to homepage
Wishlist
Shopping cart €0.00*
Show all categories Land Rover Back
Zur Händlerkarte

Das könnte Sie auch interessieren

TREKFINDER Damper for LANDROVER Defender 90 / 110 / 130 by KONI RAID - Front Axle
TREKFINDER Damper for LANDROVER Defender 90 / 110 / 130 by KONI RAID - Front Axle
This TREKFINDER damper fits the Defender 90 / 110 / 130 Discovery 1 Range Rover Classic front axle by KONI Heavy Track RAID - suitable for vehicles with lifts up to +5 cm. This part is sold per piece.
Product number: 90-5470
Weight: 6,1 kg
Parcel shipping

Delivery time 5-10 working days

€279.00*
Land Rover Defender 110 lift kit HD
HD Lift Kit for Land Rover Defender 110 (Heavy Duty)
HD suspension for Land Rover Defender 110 (for heavily loaded rear axles) Set consists of:  1x TREKFINDER coil springs  2x front axle shock absorbers 2x holder for additional spring, rear, bottom 2x bracket for additional spring, rear, top 1x lift spring set for Land Rover Defender 110 2x shock absorber Koni HeavyTrack RAID Defender  Due to the increased articulation angle of the front cardan shaft caused by the lift, we recommend the installation of a cardan shaft with double joint.  Cardan shaft for Defender Td4 from MY07 can be found here.  Cardan shaft for Defender Tdi/Td5 up to MY07 can be found here.     
Product number: FWHDTREK110
Weight: 60,0 kg
Parcel shipping

Delivery time 5-10 working days

€2,309.00*
Mounting material for 2 pieces Koni / RAID shock absorbers below
Mounting material for 2 pieces Koni / RAID shock absorbers below
Mounting material for 2 pieces KONI/ TREKFINDER Heavy Track RAID  shock absorber 90-5375SP1 + 90-5471 below Mounting material for the pin fastening of the shock absorber - suitable for LAND ROVER Defender models up to approx. 2001 ( no pot mounting ) Scope of delivery: 8 pieces metal washer + 4 pieces rubber + 2 pieces self-locking nut
Product number: SLSKH
Weight: 1,0 kg
Parcel shipping

Delivery time 5-10 working days

€59.00*
Rubber mounting for 1 piece Koni / RAID shock absorber top
Rubber mount for 1 piece Koni / Trekfinder RAID shock absorber top
Rubber mount for Koni / Trekfinder RAID shock absorber top 90-5375SP1 + 90-5471 suitable for all years of construction! Scope of delivery: 1 piece
Product number: 1523-340500
Weight: 0,5 kg
Parcel shipping

Delivery time 5-10 working days

€25.00*
Mounting material for 1 piece Koni / RAID shock absorber top and bottom
Mounting material for 1 piece Koni / RAID shock absorber top and bottom
Mounting material for 1 piece KONI/ TREKFINDER Heavy Track RAID damper 90-5374SP1 + 90-5470, top and bottom Mounting material for the pin mounting of the shock absorber on both sides Suitable for all LAND ROVER Defender models Scope of delivery: 8 pieces metal washer + 4 pieces rubber + 2 pieces nut self-locking
Product number: 7050-159280
Weight: 1,5 kg
Parcel shipping

Delivery time 5-10 working days

€49.00*

Ähnliche Artikel

KONl Heavy Track RAlD Shock absorber Defender rear
KONI Heavy Track RAID Damper rear Axle - long. LR 90/110/130, Disco I, RR Classic
KONl Heavy Track RAlD - long This damper is engineered to fit the rear axle of the Defender 90/110/130 Thanks to years of experience in designing and manufacturing dampers KONI is the leading force on the market when it comes to outfitting busses, trucks, trailers, military vehicles, trains and various other one-of-one projects with a smooth ride. And now, for the first time ever, KONI is applying its incredibly capable equipment and wide ranging know-how to the 4x4 sector, especially targeting the more abitious driver. Heavy Track RAID dampers are engineered to be reliable and high quality, but at the same time simple to use. The special features of the NEW Heavy Track RAID are: two cylinder technology: This whay even when sustaining heavy damage to the 2.5mm strong outter cylinder, the damper is still fully functional Memory cylinder: Large opening (70mm), Twice the amount of oil to improve cooling and performance Outter cylinder: Large opening (70mm), Twice the amount of oil to improve cooling and performance Mounts: solid mounts, welded all the way around Adjustments to the travel can be made, this way you can adapte the damper to any new spring or vary the load, thus extending the lifetime of your damper and the sability of your vehicle Doubble dynamic protection: hydraulic deadstop, high pressure seals Easy mounting process: The Heavy Track's dimensions are similar to those of the originals, so no modifications are necessary
Product number: 90-5401
Weight: 8,0 kg
Parcel shipping

Delivery time 5-10 working days

€386.00*
GIRLING shock absorber, front short wheelbase, RTC4230GIRLING
GIRLING shock absorber, front for Land Rover, short wheelbase
Girling shock absorber, front For front, short wheelbase For the following series:    Series 1 - 1954-1958    Series 2    Series 2A    Series 3 These traditional hydraulic shock absorbers feature fluid and seal technology to keep your Land Rover suspension under control.
Product number: RTC4230GIRLING
Weight: 3,5 kg
Parcel shipping

Delivery time 5-10 working days

€59.00*
Garling Rear Shock Absorber, RTC4232GIRLING
GIRING shock absorber, rear for Land Rover, short wheelbase
Girling shock absorber, rear For rear, short wheelbase For the following series:    Series 1    Series 2    Series 2A    Series 3 These traditional hydraulic shock absorbers use fluid and seal technology to keep your Land Rover's suspension under control.
Product number: RTC4232GIRLING
Weight: 3,5 kg
Parcel shipping

Delivery time 5-10 working days

€59.00*
Girling shock absorber
GIRLING shock absorber, front for Land Rover, long wheelbase
Girling Shock Absorber, front For front, long wheelbase. For series:    Series 2    Series 2A    Series 3 These traditional hydraulic shock absorbers use fluid and seal technology to keep your Land Rover's suspension under control.
Product number: RTC4483GIRLING
Weight: 3,5 kg
Parcel shipping

Delivery time 5-10 working days

€59.00*
GIRLING shock absorber
GIRLING shock absorber, rear for Land Rover, long wheelbase
Girling shock absorber, rear For rear, long wheelbase For the following series:     Series 2    Series 2A    3 Series These traditional hydraulic shock absorbers use fluid and seal technology to keep your Land Rover's suspension under control.
Product number: RTC4442GIRLING
Weight: 3,5 kg
Parcel shipping

Delivery time 5-10 working days

€59.00*
Shock absorber TREKFINDER for LAND ROVER Defender 90 / 110 / 130 rear axle by KONI RAID
Shock absorber TREKFINDER for LAND ROVER Defender 90 / 110 / 130 rear axle by KONI RAID
Shock absorber TREKFINDER for LAND ROVER Defender 90 / 110 / 130 rear axle by KONI RAID Shock absorber TREKFINDER for LAND ROVER Defender 90/ 110/ 130 + Discovery I + Range Rover Classic front axle by KONI Heavy Track RAID - suitable for suspensions from 0 to 5 cm ride height - unit price.
Product number: 90-5471
Weight: 6,1 kg
Parcel shipping

Delivery time 5-10 working days

€279.00*

KONI HeavyTrack Stoßdämpfer Defender / Disco 1 / Range Rover Classic - Hinterachse

€205.00*

Prices incl. VAT; plus shipping costs / Parcel shipping

↪️ für Land Rover Defender / Disco 1 / Range Rover Classic ✔️ für die Hinterachse ✔️ beste Qualität ✔️ schneller Versand

Delivery time 5-10 working days


Product number: 8240-1182SPX
Weight: 3 kg
Fast dispatch
Individual counselling
Rapid processing of enquiries
Technical advice: +49 9181 466 644
This website uses cookies to ensure the best experience possible. More information...