Monitoring the charge of your stored 12V motorsport lead acid battery2 automatic operating modes: Battery charge level - corresponding LED flashes every 3 seconds (long-term current draw below 0.2 mA). Charging system test - when the charging voltage is 13.5 V or until the ideal range of 14 V + is reached, the LED arrow mode is activated with 4 LEDs the voltage range from "full to empty" of all 12 V batteries is covered (including AGM with higher voltage for motorsport) SAE charging port with weatherproof cap for use while driving charging system status is displayed with the engine running length 100 cm, 15 A fuse, 5/16 "/ M8 eyelets https://www.youtube.com/user/TecMate1/about

The following values ​​are calculated and displayed under microprocessor control: - Current solar power 0 - 999 W (watt) - Current solar power 0 - 60.0 A (ampere) - The geographic and weather-dependent influences show up immediately and unmistakably. This also applies to the orientation of the sun, partial shading or soiling of the solar modules. - Current solar battery voltage 7 - 32.0 V (volts) Allows conclusions to be drawn about the battery status (flashing warning display at under or Overvoltage of the battery) - Invited solar capacity 0 - 9999 Ah (ampere hours) - Invited solar energy 0 - 9999 kWh (kilowatt hours) The energy generated by the solar modules (Wh and kWh) and that charged into the battery Capacity (Ah) are measured, added up and displayed, even over days and weeks. The display values ​​can be individually reset to "zero" at any time for your own statistical purposes: Are the solar modules shaded or dirty or is something wrong? How much energy does my solar system actually deliver?In order to be able to answer these questions, VOTRONIC offers the LCD solar computer S, which is simply connected to the VOTRONIC solar charge controller of the SR and MPP series and immediately provides the required information. It is also possible to connect the LCD solar computer S to the controller at a later date, since the VOTRONIC solar charge controller already has are ready to plug in and provide the required signals. The connection is therefore kept extremely simple. The measured values ​​are clear and easy to use at the push of a button for better control and use of the solar system shown on the display. The display is backlit (switchable) and also from greater distances and very easy to read under lighting conditions. The LCD solar computer S is designed as a panel version to match the VOTRONIC module system and is both optically and also mechanically (uniform height 85 mm) to the other display modules. Small front panel dimensions and the particularly small installation depth of just 22 mm allows installation at almost any point. If the device is not installed countersunk, stands a corresponding add-on housing is available in our range of accessories. The connection to the solar controller is ready to plug in with the supplied 5 m long connection cable, which can be extended by a further 5 m. Technical specifications: Nominal battery voltage (DC) in [V] 12 and 24 Current consumption max. in [mA] 3 - 30 LC display with specific segments Display function W, A, V, Ah, Wh Measuring range 20 - 990 Dimensions (WxHxD) in [mm] 80 x 85 x 25 Installation dimensions (WxHxD) in [mm] 66 x 72 x 22 Weight in [g] 55 Approval marks CE, E-approval (EMC / vehicle directive) Ambient conditions, humidity: max. 95% room humidity, non-condensing Scope of delivery: 5 m connection cable, fastening screws, operating instructions, drilling template

OptiMATE solar kit, panels with intelligent charge/monitoring controller. The highly effective solar charger (solar impulse charging system), with which even deeply discharged batteries can still be saved and protected. It guarantees safe and intelligent charging, as the OptiMATE solar battery charging system independently switches between continuous charging or pulse charging depending on the sunshine. OptiMATE analyses the state of the battery the next day and optionally continues charging or - in the case of a defective battery - optimisation. Safe long-term maintenance without the risk of overcharging. Automatic shutdown in the event of a short circuit or as soon as the battery is disconnected. Excellent safety for battery and vehicle electronics Easy monitoring of the battery status with the help of the monitor display, which updates itself every 3 seconds. (current consumption < 0.5 mA). With this battery charging system you get an all-round package, mobile, portable, intelligent. The system is suitable for standard, AGM, LFP and gel batteries. It is supplied with battery terminals and ring eye connections and with German instructions. The solar systems are manufactured to a high standard in South Africa (made in South Africa). Product Information Solar Panels - Solar Charger Info about the solar panels: Power: 40 watts (max.)60 Watt (max.)80 watts (max.) Voltage: 12 V nominal, 22 V maximum Possible uses: Outdoor/indoor Design: High-quality aluminium frame (weatherproof) with 4 mounting brackets, output cable 200 cm with SAE connector Info about the OptiMATE charging/monitoring controller: Charging current:  3.3 A from 40 W panel (max. average current), 3-5 A pulse current. 5 A from 60 W panel (max. average current), 3-5 A pulse current 6.67 A from 80 W panel (max. average current), 3-5 A pulse current Usage: Indoor/outdoor (lowest temperature: -20 °C. Economy mode: start with low 1 V voltage Suitable for: STD, AGM and GEL 12 V batteries with 2 - 240 Ah. Input: 15 - 22 V Design: Weatherproof charge controller housing with mounting holes and loops (for Velcro or Ziptie). SAE input connector for solar panel and output cable of 100 cm to be connected to the battery with the supplied weatherproof battery cable and standard battery clamp set. Dimensions (corner brackets included): 40 watt panel: width: 42.9 cm / 16 7/8 " height: 68.6 cm / 27 " depth: 3.3 cm / 1 1/4 "60 Watt panel: Width: 65.9 cm / 16 7/8 " Height: 68.6 cm / 27 " Depth: 3.3 cm / 1 1/4 "80 Watt panel: Width: 68.5 cm / 27 " Height: 78.1 cm / 30 3/4 " Depth: 3.3 cm / 1 1/4 " Optimum safety: there is no risk of overcharging. Completely safe for vehicle electronics. Spark suppression. Safe for long-term battery maintenance. Automatic cut-off in case of short circuit or disconnected battery. The panels are supplied with a 3 m cable as standard. A suitable extension cable can be found here. Additionally included in delivery are: suitable carrying bag adjustable stand (fixed to the panel) The panel is ideally suited for our parking heater, for example. Please note: When using the panel for a cool box, a buffer is necessary, as the starting current is too high.  Made in South Africa https://www.youtube.com/user/TecMate1/about  <iframe width="560" height="315" src="https://www.youtube.com/embed/lYjy11Jk6JU" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>