Ähnliche Artikel
slide 1 of 1
Dropside bushing 24mm for exhaust gas of AUTOTERM (=Planar) parking heater, with screw holes
From
€70.95*
Dropside bushing 24mm for exhaust of AUTOTERM (=Planar) parking heater, with screw holes
Side wall bushing for all Planar parking heaters with an exhaust pipe diameter of 24 mm (AUTOTERM Luft 2D / 4 D = Planar 2D, 4D, 44D).There is the version with screw holes as well as the version with stud bolts where no screws are visible from the outside. The variant with stud bolts is particularly suitable for a wall thickness of up to 15 mm.If the wall thickness is thicker, the version with screw holes should be used. Please note:When installing the parking heater, you must take into account the general wading depth of the vehicle. Depending on the position of the parking heater intake, the wading depth may change individually for the vehicle. Please also be sure to observe the instructions of the parking heater manufacturer!
Product number:
PLANAR-BDAU-LM
Das könnte Sie auch interessieren
slide 6 to 8 of 5
AUTOTERM Control board 5563, for AUTOTERM 2D-12
€129.00*
Control unit for the Planar 2D This board can be used as a spare part or to convert heaters without height kit. For vehicles with 12V on-board voltageSuitable for heaters from serial number: 5561 ..... Please note :If you carry out the conversion yourself, the warranty and the warranty expire. We advise against an independent conversion!The return of an electronic component is not possible. Have it carried out in a certified specialist company. If you have any questions please contact us via email or phone. https://www.autoterm.com/partners/trusted/nakatanenga-4x4-equipment
Product number:
STEUPLAT-5563
Storage bag for up to 3m WALUFLEX hot air hose
From
€79.00*
Hose bag for perfect storage
If you’re travelling a lot with gear and equipment, whether it’s camping, expeditions or simply for your business or job, you just know how quickly things deteriorate when your stuff doesn’t have its proper place. That’s why our mobile Diesel heaters are so great. Everything you need in one box! With one exception, though: the WALUFLEX pipe for warm air transport from the heater is too big for that.
But that doesn’t mean you have to pack the tubing in plastic bags or carry it as it is. Our textile workshop has now come up with a dedicated storage bag with carrying straps especially for the WALUFLEX pipe. Made from robust and easy-to-clean 1000D Nylon material, the pack bag stores and protects the warm air tube. Moreover, it also saves a lot of valuable pack space. Tubes of up to 3 m length can be secured in the bag with two separate straps. Zip it up, job done!
By the way, we have also sewn a patch of MOLLE fleece onto the front of the bag. That makes it very easy to identify the WALUFLEX bag with badges, labels etc. Ready to go!
You can order the carrying bag by itself or including a WALUFLEX tube (3 m) with end collars.
Product number:
TA3MWALUFLEX-GRYCOYM
Tip
PUNDMUNN hot water boiler THERMAIR 6 and 9 liters
From
€450.00*
Hot water - Always and everywhere At home, you have warm water coming out of your taps, just like that. That’s why armchair travelers never really appreciate what a precious commodity that is. But if you spend enough time on the road or in nature – be it in a camper van, on a boat, in a food truck or a market stall – you will know what a truly great thing water is when it flows clean and warm wherever and whenever you need it. If you already have a diesel heater installed in your vehicle, boat or trailer – by AUTOTERM or an equivalent – you can easily upgrade to a warm water system. Pundmann have designed their mobile water heaters, the 6-liter Therm 6AIR and the 9 liter Therm 9AIR, specifically for AUTOTERM diesel heaters. Accordingly, installation is completely hassle-free. If you have a 230V power outlet available, you can run the water heater with the inbuilt 500W heating element. Whenever there is no electricity nearby, simply let your Autoterm (or equivalent) do the job of heating your water. It will take 50 minutes for the smaller 6-liter tank and 60 minutes for the larger tank. Operating pressure is at 1.5 bar/21.75 psi with a security valve limiting pressure to 2.2 bar/31.9 psi. Dimensions of 200 x 228 x 360 (6 l) or 200 x 228 x 520 (9 l) mm, respectively, make the tanks small enough to fit even in tight spaces. Mounting plates, adapters, pipes, mixing taps and other accessories can be found here. Last but not least, the tanks are made from stainless steel and meet food safety standards The article is suitable for any parking heater (gasoline, diesel, gas) from 2kw.
Product number:
NATHERM9AIRM
AUTOTERM- Side entry Fi 24mm with outlet bend
slide 2 of 3
€89.00*
Prices incl. VAT; plus shipping costs / Parcel shipping
Available from stock - delivery time 1-3 working days
Product number:
63629
Weight:
1.5 kg
Side entry Fi 24mm with outlet bend for AUTOTERM (=Planar) parking heater
- Side wall bushing for all Planar parking heaters with an exhaust pipe diameter of 24 mm
Exhaust system
- 24mm - exhaust system for the following parking heaters: Autoterm Air 2D (formerly Planar 2D) Autoterm Air 4D (formerly Planar 44D) Autoterm Flow 5D (formerly Binar 5S D) Autoterm Flow 5B (formerly Binar 5S)
Please note:
When installing the parking heater, you must observe the general wading depth of the vehicle. Depending on the placement of the parking heater intake, the wading depth may change individually for the vehicle. Please also be sure to observe the instructions of the parking heater manufacturer!