Adapter for connecting 2 Alan PL259/6 plugs.

Prime C1 Magnet USB XP-L White Flashlight Armytek are famous for creative outdoor and survival flashlights like the angle-head lamps Tiara or Wizard. More traditional flashlights with light beams out of the front are also better when developed and produced by the Canadians. The Prime C1 Magnet USB is such a high-quality flashlight, combining traditional design and extreme performance. A total of 11 light modes, 970 OTF Lumen and 165 m beam distance in the most powerful turbo setting, various strobe modes for signaling and a virtually endless low light setting with 60 days until the battery is drained, those are not the only top arguments in favor of the Prime C1. With a length of only 92 mm, the flashlight is compact enough to fit any pocket and so robust that it can be run over by a car. The Prime is certified to function in water depths of up to 10 m for at least 2 hrs.  In other words, you will never ever have to worry about your flashlight not being protected from rainwater, dirt and dust. As is customary with Armytek lamps, the Prime is activated and operated by a single button. The button has a firm pressure point and is recessed into the housing to prevent accidental activation and draining of the battery. Apropos draining: once the Prime is switched off, the flashlight boasts an ultra-low current drain technology. It would take the battery 25 years or more to go completely flat. Sounds too good to be true? Armytek are so confident in their product that they provide a no-hassle 10-year warranty. The Prime C1 comes with a case, metal clip, two rubber seals, magnetic charging cable and a rechargeable 18650 Li-Ion battery.  Specification: Light & OpticsColor temperature: WhiteLED light output: 1,050 lmOTF light output: 970 lmBeam distance: 165 mLED: XP-LStabilization of brightness : FULL (constant brightness)Hotspot: 20°Spill: 80° Dimensions & WeightHead diameter: 24.5 mmLength: 92 mmBody diameter: 24.5 mmWeight : 60 g Body & DurabilityWaterproof & Submersible: 10 mOperation temperature : -25..+40 °CImpact Resistance: 10 m Modes & ElectronicsPower source: 1x18350 Li-IonNumber of modes: 6Runtime for maximal mode: 30 minRuntime for minimal mode: 60 daysAbility to use batteries with a flat contact: yesProtection from accidental switch-on:yes

Zippy Extended Set Multi-Flashilght Product Description:Zippy Extended Set Armytek, Canadian manufacturer of high quality flashlights for extreme tasks, have developed a small and light keyring lamp for your pocket. Unlike Armytek’s extreme outdoor flashlights Tiara or Wizard, the Zippy is truly an everyday item. Zippy sounds like Zippo, the legendary reusable lighter, and that’s most likely no coincidence because, like the Zippo lighter, the Zippy lamp is small, compact and absolutely reliable. The Zippy is 9 mm thin and weighs only 12 g. In stark contrast to many other keyring lights, usually given away as branded merchandise, the Zippy is a proper multifunctional flashlight with 3 light modes, 160 OTF Lumen and 15 m beam distance in the brightest setting. The wide-angle illumination is a great help when you need to orient in the dark or want to find a misplaced item. There is also a low light “firefly” mode to find a keyhole and a brighter ambient light setting for quick repair jobs. It will be more than enough light to change a tire or a fuse, fix starter cables to a car battery and a lot more. The integrated 100 mAh Li-Pol battery lasts 17 min in the brightest mode and 10 h in the darkest. It is recharged via USB. The Zippy’s housing is water- and dustproof to IP67 standard and protected by stiffening ribs. Its ring attachment is made from metal and firmly integrated into the construction. There’s no breaking it off or tearing it out of the housing. And then there’s another great design feature you’ll appreciate if you hate disposable gadgets as much as we do: The transparent plastic housing is neither glued nor permanently pegged. It can easily be opened by four screws in case it is damaged or something needs to be fixed on the inside. The likelihood of failures, however, can be gauged by the fact that the Zippy comes with a 5-year no-hassle warranty. The Extended Set includes a metal clip for belts, bags or caps and a magnetic, multifunctional swivel-mount for headbands or temporary attachment to car bodies or other metal surfaces. The Zippy comes in blue, green, yellow or gray. Armytek is a Canadian brand for high qualtity multi-flashlights for extreme performance in job and hobby. As the brand name suggests, the products are designed to correspond to military standards regarding functionality and quality. Available in 4 different colors! The lamp WITHOUT magnet and headlamp attachment can be found here. Product Specification: Light & OpticsLED light output: 200 lmOTF light output: 160 lmBeam distance: 15 mStabilization of brightness : FULL (constant brightness)Hotspot: 60°Spill: 110° Dimensions & WeightLength: 59 mmWeight : 12 g Body & DurabilityBody material : PlasticWaterproof & Submersible: 1 mWaterproof and dustproof standard : IP67Operation temperature : -10...+40 °CImpact Resistance: 2 m Modes & ElectronicsPower source: Li-Pol 100 mAhNumber of modes: 3Runtime for maximal mode: 17 minRuntime for minimal mode: 10 hAbility to use batteries with a flat contact: yesProtection from accidental switch-on: yes

Kabel mit Stecker für Zigarettenanzünder Passend für unsere kleine mobile Standheizung. 4 m Kabel Stecker für Zigarettenanzünder Bitte beachten Sie: Der Stecker ist belastbar bis 16 A. Die Buchse MUSS ebenfalls bis 16 A belastbar sein. 

Defender One Touch Indicator Upgrade Defender - from late 300Tdi to current 2016 -2.2TDciThis complete plug and play upgrade adds the functionality of new vehicles equipped with lane change or 3 flash indicators to your Defender. With a simple momentary press of the indicator stalk the indicators will flash 3 times.Note - Please check on 300Tdi models you have the later style wiring connectors to confirm this you will need to remove the lower steering cowl.

Brief description: DV antenna cable 5m RG58 with PL foot incl. Weather protection cap and FME PL adapter - solderless This article is perfect as a roof duct for an antenna cable to operate a CB radio system. The supplied cover cap protects the PL foot from the weather when an antenna is not in use. The detachable PL adapter makes it easy to lay the cable inside the vehicle or to carry it out in tight spaces. There is no longer any need for soldering work because this article is provided with a PL screw connection on both sides. This article is ideal if, for example, you want to use our Cargobear antenna holder on our Cargobear in the rear area and are looking for a clean solution for the cable duct in the interior right up to your CB radio.

Practical dynamo / solar flashlight This little flashlight belongs in every emergency or survival kit. Even when the in-built battery is completely flat, you can get it working in no time, because the power sources for this little helper are built into the lamp’s housing: a small solar panel on one side and a dynamo with a crank handle on the other. Simply recharge this torch by exposing the mini solar panel to sunlight or by exerting a tiny amount of physical labor i.e. cranking the handle. There is no need for any external sources of electricity, chargers or replacement batteries. This combination of hassle-free recharging makes this torch ideal in all kinds of off-grid or emergency scenarios: for camping, when your car breaks down at night or in a black-out. Or simply when walking alone or with your dog at night. The lamp‘s three economical LEDs can be powered for approximately 1 hour by only 6 minutes of cranking. If possible, you can also keep the torch in a place where it can regularly collect sunlight. In which case, you’ll probably hardly ever need to use the crank handle. The black and olive housing is compact, robust and features an integrated carabiner hook to securely hang the torch from your belt, a backpack or in your tent. The ergonomic design ensures, that all functions can be quickly accessed, even in the dark. This inexpensive flashlight comes with a 1-year manufacturer’s warranty. Dimensions:124×45×32 mm

Blower control for Land Rover Defender Fan and heater in classic Defenders are notoriously poor in performance and reliability – especially in northern latitudes, where cold winters and rainy days regularly impair comfort and safety in the cockpit. While Land Rover upgraded to an improved fan heater for the Td4 (MY 2007), all previous models can easily be retrofitted with an electronic control system. In contrast to the old analog fan heater, the new electronic control system allows for continuous adjustments. This ensures more efficient operation and therefore better ventilation, heating and dehumidification in the interior. Heating your vehicle’s interior can be achieved much quicker, as is demisting or de-icing of the windows. Additionally, the electronic control is much less prone to wear than the old mechanical solution using sliders and resistors, which are susceptible to shocks and vibrations. The retrofit kit includes the electronic control, a stepless slider and all the assembly parts for the connections. Installation instructions are included.  

Only the most hardened purists would welcome a return to the times before central locking. Let’s be honest, we’ve all become too spoiled. A Landy with central locking is better than one without. Our replacement case for the key fob is meant to replace the original one when the the buttons are faulty or the shell too worn out from use. Simply install the electronics from the original remote in the new key fob case and attach to your key ring. New programming is not required. Suitable for Land Rover Defender with separate remote control, incl battery CR2032. Except for remote controls with the following form:

Light switch Land Rover Defender Td5/Td4  For all models from (VIN) VA104806 to EA999999

Licence plate light with integrated reversing camera Licence plate light with integrated reversing camera. They replace the unsightly original plastic part and offer more than just an additional eye-catcher on the vehicle. The bright LED lighting ideally illuminates the number plate in all weather conditions and ensures a long service life.The integrated reversing camera provides the best view to the rear and thus prevents damage when reversing. So you have a huge relief AND a cool gimmmik with minimal effort.Product details:     made of high-strength aluminium     corrosion & UV resistant coating     camera resolution 480-520 TV     camera with day and night vision function     Camera is tiltable     Camera viewing angle is 120° - 140° horizontal angle     Camera is IP67 certified (dust and waterproof) Scope of delivery:     LED number plate light     Rear view camera     Seal and fit kit     6m long chinch video cable     1,5m long 12V power cable The original holes for the number plate lighting are used. On some models, however, the lighting may protrude slightly, in which case 2 additional holes could be placed so that the lighting rests on top.Please note that NO monitor is included in the scope of delivery!All monitors with a cinch connection can be used.

Power and earth distributor for 12 consumers, for installation in the Land Rover Defender TD4, incl. pre-assembled cable set and pre-fuse. Cable length: 150 cmCable cross-section: 50 mm²

Relay cable set for controlling 1 or 2 pairs of worklights with full voltage, to minimise line losses and maximise luminosity, with 2*4 m or 4*4 m supply line The cable set can be used as an extension of an existing cable set for the main headlights (NARK-UNI or NARK-LR) or for independent use. Please select which variant you require.

The most modern 12 V 10 A & 24 V 5 A battery charger in the world! OptiMate 7 12 V-24 V is perfect for 12 V and 24 V starter and deep-cycle batteries requiring accurate temperature-controlled charging and unmonitored, safe long-term expectancy. SPECIAL FEATURES: Tailored to sensitive electronics: The RETTUNGS program is designed to provide a SAFE, fully automatic, low voltage start (starting at 0.5 volts) and IMPULS rescues of deeply discharged batteries connected to very sensitive electronics, such as light aircraft, industrial equipment, etc , Protection against Wrong Voltage Selection: When 24V has been selected and a 12V battery is connected, OptiMate 7 12-24 V immediately warns that a lower voltage has been measured and will not continue charging. The USER must confirm that the rated voltage of the connected battery is 24 V before the RESCUE mode is activated. CHARGING POWER: 10A @ 12 V / 5 A @ 24 V (Ampmatic) USE: Indoor / outdoor (lowest temperature: -40 ° F / -40 ° C). RESCUE: Starting at low voltage of 0.5 V (12 V) + 1-stage desulphation rescue. IDEAL FOR: STD, AGM & GEL 12 V batteries from 3-400 Ah / 24 V batteries from 1-200 Ah. INPUT: Global (100-240 V 50-60 Hz), high efficiency (CEC listed), fully enclosed. DESIGN: Weather resistant housing with wall mount, with 6 ft / 180 cm power cable and 6 ft / 180 cm charging cable with SAE plug. Weather resistant battery lead & standard battery terminal set included. 6 different charging programs: 12 V: 14.4 V (for normal lead acid batteries) 12 V: 14.7 V (for high performance AGM or spiral cells – OptiMa / odessey batteries)12 V: 15 V (for Ca/Ca batteries that need 15 V charge). 24 V: 28.8 V (for normal lead acid batteries) 24 V: 29.4 V (for high performance AGM or spiral cells – OptiMa / odessey batteries)24 V: 30 V (for Ca/Ca batteries that need 15 V charge). SAFE: No risk of overcharging. Absolutely safe for the vehicle electronics. Radio suppression. Safe for long-term battery maintenance. Automatic shutdown in case of short circuit or disconnected battery. https://www.youtube.com/user/TecMate1/about

LADEN SIE IHRE 12 V – 13.2 V-BATTERIE MIT EINER ANDEREN 12V-BATTERIE! KEIN WECHSELSTROM ERFORDERLICH Laden Sie die Batterie Ihres Motorrads, ATV oder Rennboots auf dem Anhänger auf dem Weg zur Veranstaltung.  OptiMATE DC to DC entnimmt Strom aus der Batterie Ihres Fahrzeugs oder aus einer externen 12 V-Batterie, um eine andere 12 V-13.2 V -Batterie zu retten, zu laden und zu warten. Der äußerst effiziente Langzeitwartungsmodus von OptiMATE DC to DC schützt die Quellbatterie und entnimmt nur dann Strom, wenn die zu ladende Batterie ihn benötigt. Der OptiMATE Wartungsmodus hält die Batterie bei voller Ladung, sie wird niemals überladen, die Lebensdauer wird erhöht und die Leistung der Batterie verbessert. OptiMATE DC to DC kann eine tiefentladene, sulfatierte Batterie noch bei 2 Volt retten. LADESTROM: 2 A VERWENDUNG: Innen/außen  (niedrigste Temperatur: -4°F/-20°C). RETTEN: Start mit niedriger Spannung von 1 V IDEAL FÜR: STD, AGM & GEL 12V-Batterien und LFP (LiFEPO4) von 3 – 96 Ah. EINGANG: 12-16 V, 2.7 A max AUSFÜHRUNG: Witterungsbeständiges Gehäuse mit Wandhalterung, mit 6 ft/180 cm Netzkabel und 6 ft/180 cm Ladekabel mit SAE-Stecker. Witterungsbeständige Batteriezuleitung, Standard-Batterieklemmensatz und Batterieklemmensatz mit Sicherung enthalten. SICHER: Kein Risiko der Überladung. Vollkommen sicher für die Fahrzeugelektronik. Funkenunterdrückung. Sicher für die langfristige Batteriewartung. Automatische Abschaltung bei Kurzschluss oder abgeklemmter Batterie. 3 Jahre eingeschränkte Garantie (diese Garantie besteht unabhängig von den bestehenden unentgeltlichen gesetzlichen Mängelrechten. Die gesetzlichen Mängelrechte werden durch diese Garantie nicht eingeschränkt). https://www.youtube.com/user/TecMate1/about 

PRO series: 12V 10 A diagnostic battery charger tester & power supply unit. Suitable for new or used 12 V lead acid (3-50 Ah) and 12.8 V/13.2 V LiFePO4 (2-20 Ah) batteries. 3 choices: Select a charging mode for 12 V lead-acid OR 12.8 V LiFePO4 or select the power supply mode for battery support during vehicle diagnostics, tuning or troubleshooting.Automatic quick battery activation: a flashing green test light indicates that the battery is healthy and sufficiently charged.Intelligent recovery mode for deeply discharged batteries; a bad battery is quickly identified, a good battery is charged and then retested.Push button activated BMS recovery for LiFePO4 batteries.Test battery indicator for GOOD (80 to 100 %), OK (60 to 80 %) and BAD (below 60 %).Power supply mode provides constant power for vehicle tuning, diagnostics and troubleshooting. CHARGING CURRENT: 0.4 A to 10 A variable (Ampmatic). CHARGING VOLTAGE: 12 V lead acid: 0.5 V to 22 V. 12.8 V/13.2 V Lithium LFP (LiFePO4): 0.5 V to 14.4 V. Power supply: 11 V to 13.6 V. OPERATION: Selectable USE: Indoor IP40 rating. INPUT: Global (100-240 V 50-60 Hz), high efficiency. STYLE: Case with rubber bumper, with wall bracket or suspension rod. Class 2 AC input socket, with ON/OFF switch, 15 cm/6″ output cable. CABLES INCLUDED: Class II power cord, suitable for the region, O-43 charging cable extension 180 cm/72″ and O-14 fused battery clips. CARRYABLE USE: Hanging hook for vehicle and wall receiver included. WARRANTY: 2 year limited repair/replacement warranty. By the manufacturer!

Electrical protection - Corriaion protection agent High-quality electrical protection to prevent starting problems in wet conditions. Due to its extremely good creeping ability, the spray infiltrates and displaces water and moisture. Engine parts are protected against rust formation and contamination. The unique corrosion protection agent infiltrates moisture and wetness through a physical/chemical process and forms a permanent, effective protective film. Wherever the clash of water or moisture and electronic components is a PROBLEM and another solution, such as a protective lacquer, cannot be used for technical reasons, Presto offers a unique and high-quality solution: ✓ liquid insulating agent✓ fast effect✓ avoids starting problems✓ displaces moisture✓ anti-corrosive effect We do not deliver this item to Switzerland.

Funkfernbedienung für AUTOTERM Standheizungen Mit dem enthaltenen Modul und der zertifizierten Funkfernbedienung können Sie AUTOTERM Luft 2D und 4D (= Planar 2D12, Planar 44D12) Standheizungen mit 4 Kabeln und Dieselvorerwärmer des Typs AUTOTERM Flow 14S (=14TC-Mini) per Funkfernbedienung steuern. Vorausschauend denken und bereits vor Fahrtbeginn die Standheizung starten! Sie frieren ungern während der Fahrt und ärgern sich, dass es erst warm ist, sobald man am Ziel angekommen ist? Dann sind Sie mit diesen Fernbedienungen bestens bedient! Mit dem enthaltenen Modul und den Funksendern können Sie 12-Volt-AUTOTERM-Standheizungen, Standheizungen mit 4 Kabeln und Dieselvorerwärmer des Typs AUTOTERM Flow 14D (ehem. 14TC-Mini) per Funkfernbedienung steuern! Im Lieferumfang sind 2 Sender und natürlich das Modul für den Anschluss an die Standheizung enthalten. Lieferumfang: - 2 Sender- Modul für 12 Volt Planar Standheizungen inkl. Anschlussplan Alle Modems oder Funkfernbedienungen werden am braunen und weißen Kabel der Planar angeschlossen. Das Simcom hat eine vorbereitete Steckverbindung. Die PU5 oder PU27 Bedienteile können weiterhin benutzt werden. Im Gegensatz zu anderen Anbietern ist unserer Funkfernbedienung speziell auf Planar Heizungen abgestimmt und der Empfänger ist in einem wasserfesten und stoßgeschützten Gehäuse untergebracht.

Converting your 4x4 into a camper van or a utility vehicle is a tricky job, nearly impossible to plan in all its details from the outset. Only with time you’ll realize where switches should have gone or that an additional lamp or ancillary device could have been put somewhere else instead. Or there are safety regulations that prevent you from wiring certain switches into your dashboard, e.g. work or camping lights that mustn’t be switched on inadvertently while driving. And that’s when you simply decide to live with the compromises and inferior solutions because you simply dread the thought of having to re-wire everything. If you know this situation, the Wireless Connect RSU60 by Ring is for you. It lets you wire up to 8 devices easily and quickly into the tech hub, a centrally located connector panel, without the need for separate wiring of switches. All connected devices like lamps, gadgets and mechanisms are operated wireless by one remote control, wherever it is convenient. This comfortable and efficient system saves you time and materials and spares your nerves as well when something goes wrong or stops working. Faulty connections or other glitches can be easily traced from the one central tech hub, eliminating the need to take half the car apart as with hardwired solutions fitted behind dashboards and paneling or inside struts or conduits. The 12 V tech hub boasts a maximum ampage of 60 A and is designed for parallel operation of several devices. All connections are individually fused and a manual override guarantees additional safety. Moreover, battery protection ensures that battery voltage is constantly maintained and depletion is prevented. The remote switch buttons can be allocated as necessary and individually identified by an included set of stickers with different icons. The remote also features user-friendly backlit illumination, status lights and a sleep mode. Pairing the remote with the hub is as simple as pressing two buttons and unique signal pairing means that you can operate the same functions on the hub with two remote controls, one in the cabin and one in the back for example. This increases both comfort and safety. The remote is kept and charged in an included docking station.

Glow plug connector Land Rover Defender If the diesel has difficulty getting going when starting from cold, and if it nails and smokes particularly badly, this is often due to the glow plugs. Before replacing the plugs, however, you should first check the condition of the cables and plugs. Often, the problem is simply that cables and plugs are exposed through porous plastic sheathing and the electrical contacts are suffering. As a rule, the service life of the plugs far exceeds that of the cable and plug connections, because cables and plugs and their insulation are naturally much more exposed to mechanical and weather-related influences. With our glow plug connector repair kits, Defender with Td5 and Td4 2.4l engines can be very easily retrofitted in case of problems with cables or connectors. This is also recommended if the glow plug set is being replaced anyway. The advantage of the repair kit is that the next time a problem occurs, it is not necessary to replace the entire wiring harness at great expense; instead, it is sufficient to replace the plug and cable up to the crimp connection. This saves time and money and is also no problem for hobby screwdrivers. ATTENTION: Does NOT fit for Tdi and Td4 2,2l. Scope of delivery: 4 plugs

Anyone who does a lot of outdoor and water sports knows both the problem and the solution. For mobile phones and other gadgets, there is a wide range of waterproof storage devices that allow you to carry electronic helpers on your body in a theft-proof way, even when you are in or on the water. The inventors of the Keyfender have taken inspiration from this and developed a patented waterproof protective case for electronic car keys. Let's face it, is there a more important gadget than the car key? What's already good for the average driver when he takes his car windsurfing or drops his key in a puddle is almost a must for the off-roader. After all, as a 4x4 enthusiast, you are constantly dealing with the elements. You like to wade for your life and if the wading depth is not enough or you even get stuck in a ford and have to get out of the car, then you are glad to have the keyfender. The same applies, of course, to mud, dirt and spray from all directions. Even salt water, oils and extreme temperatures are no problem. The Keyfender has been awarded the IP68 protection class by Dekra, it is shock-proof and guaranteed to remain watertight up to a depth of 10 metres. The elastic window makes it possible to operate the function buttons on the key even when it is closed. The Keyfender can be attached to the body with a neoprene strap or belt, has a highly visible red signal colour and floats to the top if it should fall into the water. The Keyfender is an all-round clean and safe Made in Germany product, not only for off-roaders. It fits 95% of all car brands, both for keys with fold-out and fixed bit and also for keyless keys. The maximum dimensions for the key are 9.5 cm long, 3.9 cm wide and 2.1 cm high.

Wiper relay for Land Rover Defender.

Wiring harness injector Harness injector pump element suitable for Land Rover Defender Td5 and Discovery 2