LED Blinker für Land Rover Defender, weiß, NAS Style LED rear indicators for Land Rover Defender, white. Ideally suited for converting various special models of the Land Rover Defender with the ‘large’ NAS signal lights (diameter: 95 mm). With E-mark and mounting material. If the lights on the existing vehicle are square at the rear, you need 1x AMR3850 mounting base per light to fit the new round LED lights. As a rule, the original drill holes can then be used. Please note:  The item is supplied without a plug.  Please note:  The screws must not be overtightened (only hand-tight!), otherwise the plastic housing may crack. These cracks could allow water to penetrate the generally waterproof lights. Only use a screwdriver and NOT a cordless screwdriver!     

Robust hold, elegant look: Bearlight stainless steel mounting rings (7") for Land Rover Defender Our specially made stainless steel headlight bezels once and for all end the dreaded rust problem of the original Defender mounting rims. Suitable for all halogen, clear glass, and LED main Defender headlights by producers like J.W.Speaker, BMAC, Hella, Nolden, Vision-X, Truck-Lite, Wipac, or Sirius. Price is for one pair. Also available in black powder coated - a perfect mix of understatement and technical state of the art! If you work on your lights, why not get the stainless fitting equipment, too.

Not only for healights, but also for all other signal lights on the vehicle LED bulbs have many advantages, apart from low power consumption and high light output, there is above all superior longevity and vibration resitance that make these bulbs desirable for owners of off-road vehicles. The standard-set with 8 bulbs contains: 2x front indicatior ligths 2x front position lights, either with or without day-driving light 2x rear indicators 2x brake/rear lights adjustable indicator relay The set with 9 bulbs additionally (aditionally to the standard-set) contains:  1x tailgate break light The sets with 10 bulbs additionally (aditionally to the standard-set) contain:  → 1x fog light and 1x reverse light→ OR 2x wing side indicators The sets with 11 bulbs additionally (aditionally to the standard-set) contain:  → 1x fog light, 1x reverse light and 1x tailgate break light→ OR 2x wing side indicators The set with 12 bulbs additionally (aditionally to the standard-set) contains:→ 1x fog light and 1x reverse light and 2x wing side indicators The set with 13 bulbs additionally (aditionally to the standard-set) contains:→ 1x fog light and 1x reverse light, 2x wing side indicators and 1x tailgate break light With each kit you have the choice of orange or white bulbs for the indicators. Note that indicators must be orange by law. The fog light is always supplied in red. If the lamps on the existing vehicle are square at the rear, 1x AMR3850 mounting base is required per lamp in order to mount the new round rear fog lamp and reversing lamp. As a rule, the original drill holes can then be used. All bulbs come with E-approval so that they can be fitted without further TUV recording. All bulbs come with correct plugs for simple replacement for vehicles from MY 1998 (TD5 und TD4). Fittings are supplied, as is an adjustable indicator relay that even allows to adjust indicator speed. Older vehicles can be retrofitted after removing the plug. This requires soldering. There is no need for an external day-light driving control unit as this is already included in the position lights for day-light driving function. The wiring for day-light driving requires some straight-forward soldering - illustrated instructions are supplied. As required by law, the day-light driving light illuminates with running engine and switches off once low-beam is selected. This signal lights kit is the ideal addition to our 7" Bi-LED main headlights, the LED license plate light and any additional LED spotlights - this brings the Land Rover Defender into the 21st century light-wise! Signal lights (indicators, position lights with or without day-driving lights, brake lights, fog light and reverse light, wing side indicators) in LED technology for Land Rover Defender. E-marked, white or coloured, various sets available. Plug&play for LR plugs for TD4/TD5 (from MY1998). Please note: The screws must not be over tightened (only hand-tight!), Otherwise the plastic housing may crack. These cracks could allow water to penetrate into the generally watertight luminaires. Use only a screwdriver and NO cordless screwdriver!

Licence plate light with integrated reversing camera Licence plate light with integrated reversing camera. They replace the unsightly original plastic part and offer more than just an additional eye-catcher on the vehicle. The bright LED lighting ideally illuminates the number plate in all weather conditions and ensures a long service life.The integrated reversing camera provides the best view to the rear and thus prevents damage when reversing. So you have a huge relief AND a cool gimmmik with minimal effort.Product details:     made of high-strength aluminium     corrosion & UV resistant coating     camera resolution 480-520 TV     camera with day and night vision function     Camera is tiltable     Camera viewing angle is 120° - 140° horizontal angle     Camera is IP67 certified (dust and waterproof) Scope of delivery:     LED number plate light     Rear view camera     Seal and fit kit     6m long chinch video cable     1,5m long 12V power cable The original holes for the number plate lighting are used. On some models, however, the lighting may protrude slightly, in which case 2 additional holes could be placed so that the lighting rests on top.Please note that NO monitor is included in the scope of delivery!All monitors with a cinch connection can be used.

LED Blinker für Land Rover Defender, weiß, NAS Style LED rear indicators for Land Rover Defender, white. Ideally suited for converting various special models of the Land Rover Defender with the ‘large’ NAS signal lights (diameter: 95 mm). With E-mark and mounting material. If the lights on the existing vehicle are square at the rear, you need 1x AMR3850 mounting base per light to fit the new round LED lights. As a rule, the original drill holes can then be used. Please note:  The item is supplied without a plug.  Please note:  The screws must not be overtightened (only hand-tight!), otherwise the plastic housing may crack. These cracks could allow water to penetrate the generally waterproof lights. Only use a screwdriver and NOT a cordless screwdriver!     

Robust hold, elegant look: Bearlight stainless steel mounting rings (7") for Land Rover Defender Our specially made stainless steel headlight bezels once and for all end the dreaded rust problem of the original Defender mounting rims. Suitable for all halogen, clear glass, and LED main Defender headlights by producers like J.W.Speaker, BMAC, Hella, Nolden, Vision-X, Truck-Lite, Wipac, or Sirius. Price is for one pair. Also available in black powder coated - a perfect mix of understatement and technical state of the art! If you work on your lights, why not get the stainless fitting equipment, too.

Not only for healights, but also for all other signal lights on the vehicle LED bulbs have many advantages, apart from low power consumption and high light output, there is above all superior longevity and vibration resitance that make these bulbs desirable for owners of off-road vehicles. The standard-set with 8 bulbs contains: 2x front indicatior ligths 2x front position lights, either with or without day-driving light 2x rear indicators 2x brake/rear lights adjustable indicator relay The set with 9 bulbs additionally (aditionally to the standard-set) contains:  1x tailgate break light The sets with 10 bulbs additionally (aditionally to the standard-set) contain:  → 1x fog light and 1x reverse light→ OR 2x wing side indicators The sets with 11 bulbs additionally (aditionally to the standard-set) contain:  → 1x fog light, 1x reverse light and 1x tailgate break light→ OR 2x wing side indicators The set with 12 bulbs additionally (aditionally to the standard-set) contains:→ 1x fog light and 1x reverse light and 2x wing side indicators The set with 13 bulbs additionally (aditionally to the standard-set) contains:→ 1x fog light and 1x reverse light, 2x wing side indicators and 1x tailgate break light With each kit you have the choice of orange or white bulbs for the indicators. Note that indicators must be orange by law. The fog light is always supplied in red. If the lamps on the existing vehicle are square at the rear, 1x AMR3850 mounting base is required per lamp in order to mount the new round rear fog lamp and reversing lamp. As a rule, the original drill holes can then be used. All bulbs come with E-approval so that they can be fitted without further TUV recording. All bulbs come with correct plugs for simple replacement for vehicles from MY 1998 (TD5 und TD4). Fittings are supplied, as is an adjustable indicator relay that even allows to adjust indicator speed. Older vehicles can be retrofitted after removing the plug. This requires soldering. There is no need for an external day-light driving control unit as this is already included in the position lights for day-light driving function. The wiring for day-light driving requires some straight-forward soldering - illustrated instructions are supplied. As required by law, the day-light driving light illuminates with running engine and switches off once low-beam is selected. This signal lights kit is the ideal addition to our 7" Bi-LED main headlights, the LED license plate light and any additional LED spotlights - this brings the Land Rover Defender into the 21st century light-wise! Signal lights (indicators, position lights with or without day-driving lights, brake lights, fog light and reverse light, wing side indicators) in LED technology for Land Rover Defender. E-marked, white or coloured, various sets available. Plug&play for LR plugs for TD4/TD5 (from MY1998). Please note: The screws must not be over tightened (only hand-tight!), Otherwise the plastic housing may crack. These cracks could allow water to penetrate into the generally watertight luminaires. Use only a screwdriver and NO cordless screwdriver!

Licence plate light with integrated reversing camera Licence plate light with integrated reversing camera. They replace the unsightly original plastic part and offer more than just an additional eye-catcher on the vehicle. The bright LED lighting ideally illuminates the number plate in all weather conditions and ensures a long service life.The integrated reversing camera provides the best view to the rear and thus prevents damage when reversing. So you have a huge relief AND a cool gimmmik with minimal effort.Product details:     made of high-strength aluminium     corrosion & UV resistant coating     camera resolution 480-520 TV     camera with day and night vision function     Camera is tiltable     Camera viewing angle is 120° - 140° horizontal angle     Camera is IP67 certified (dust and waterproof) Scope of delivery:     LED number plate light     Rear view camera     Seal and fit kit     6m long chinch video cable     1,5m long 12V power cable The original holes for the number plate lighting are used. On some models, however, the lighting may protrude slightly, in which case 2 additional holes could be placed so that the lighting rests on top.Please note that NO monitor is included in the scope of delivery!All monitors with a cinch connection can be used.

LED Blinker für Land Rover Defender, weiß, NAS Style LED rear indicators for Land Rover Defender, white. Ideally suited for converting various special models of the Land Rover Defender with the ‘large’ NAS signal lights (diameter: 95 mm). With E-mark and mounting material. If the lights on the existing vehicle are square at the rear, you need 1x AMR3850 mounting base per light to fit the new round LED lights. As a rule, the original drill holes can then be used. Please note:  The item is supplied without a plug.  Please note:  The screws must not be overtightened (only hand-tight!), otherwise the plastic housing may crack. These cracks could allow water to penetrate the generally waterproof lights. Only use a screwdriver and NOT a cordless screwdriver!     

Robust hold, elegant look: Bearlight stainless steel mounting rings (7") for Land Rover Defender Our specially made stainless steel headlight bezels once and for all end the dreaded rust problem of the original Defender mounting rims. Suitable for all halogen, clear glass, and LED main Defender headlights by producers like J.W.Speaker, BMAC, Hella, Nolden, Vision-X, Truck-Lite, Wipac, or Sirius. Price is for one pair. Also available in black powder coated - a perfect mix of understatement and technical state of the art! If you work on your lights, why not get the stainless fitting equipment, too.

Not only for healights, but also for all other signal lights on the vehicle LED bulbs have many advantages, apart from low power consumption and high light output, there is above all superior longevity and vibration resitance that make these bulbs desirable for owners of off-road vehicles. The standard-set with 8 bulbs contains: 2x front indicatior ligths 2x front position lights, either with or without day-driving light 2x rear indicators 2x brake/rear lights adjustable indicator relay The set with 9 bulbs additionally (aditionally to the standard-set) contains:  1x tailgate break light The sets with 10 bulbs additionally (aditionally to the standard-set) contain:  → 1x fog light and 1x reverse light→ OR 2x wing side indicators The sets with 11 bulbs additionally (aditionally to the standard-set) contain:  → 1x fog light, 1x reverse light and 1x tailgate break light→ OR 2x wing side indicators The set with 12 bulbs additionally (aditionally to the standard-set) contains:→ 1x fog light and 1x reverse light and 2x wing side indicators The set with 13 bulbs additionally (aditionally to the standard-set) contains:→ 1x fog light and 1x reverse light, 2x wing side indicators and 1x tailgate break light With each kit you have the choice of orange or white bulbs for the indicators. Note that indicators must be orange by law. The fog light is always supplied in red. If the lamps on the existing vehicle are square at the rear, 1x AMR3850 mounting base is required per lamp in order to mount the new round rear fog lamp and reversing lamp. As a rule, the original drill holes can then be used. All bulbs come with E-approval so that they can be fitted without further TUV recording. All bulbs come with correct plugs for simple replacement for vehicles from MY 1998 (TD5 und TD4). Fittings are supplied, as is an adjustable indicator relay that even allows to adjust indicator speed. Older vehicles can be retrofitted after removing the plug. This requires soldering. There is no need for an external day-light driving control unit as this is already included in the position lights for day-light driving function. The wiring for day-light driving requires some straight-forward soldering - illustrated instructions are supplied. As required by law, the day-light driving light illuminates with running engine and switches off once low-beam is selected. This signal lights kit is the ideal addition to our 7" Bi-LED main headlights, the LED license plate light and any additional LED spotlights - this brings the Land Rover Defender into the 21st century light-wise! Signal lights (indicators, position lights with or without day-driving lights, brake lights, fog light and reverse light, wing side indicators) in LED technology for Land Rover Defender. E-marked, white or coloured, various sets available. Plug&play for LR plugs for TD4/TD5 (from MY1998). Please note: The screws must not be over tightened (only hand-tight!), Otherwise the plastic housing may crack. These cracks could allow water to penetrate into the generally watertight luminaires. Use only a screwdriver and NO cordless screwdriver!

Licence plate light with integrated reversing camera Licence plate light with integrated reversing camera. They replace the unsightly original plastic part and offer more than just an additional eye-catcher on the vehicle. The bright LED lighting ideally illuminates the number plate in all weather conditions and ensures a long service life.The integrated reversing camera provides the best view to the rear and thus prevents damage when reversing. So you have a huge relief AND a cool gimmmik with minimal effort.Product details:     made of high-strength aluminium     corrosion & UV resistant coating     camera resolution 480-520 TV     camera with day and night vision function     Camera is tiltable     Camera viewing angle is 120° - 140° horizontal angle     Camera is IP67 certified (dust and waterproof) Scope of delivery:     LED number plate light     Rear view camera     Seal and fit kit     6m long chinch video cable     1,5m long 12V power cable The original holes for the number plate lighting are used. On some models, however, the lighting may protrude slightly, in which case 2 additional holes could be placed so that the lighting rests on top.Please note that NO monitor is included in the scope of delivery!All monitors with a cinch connection can be used.