Upgrading the reverse lights on your car is always a good idea – better visibility for others and for yourself when you’re parking backwards, when maneuvering with and without trailer or driving off-road in the dark. Stronger reverse lights also greatly improve the performance of reverse cameras. For the New Defender, we are offering an extremely elegant solution that needs no external fittings and has the seamless appearance of standard equipment. Underneath the rear lights on both sides of L663, two recesses in the body are ideal for housing the additional reverse lights with their six white LEDs each. Mounting the LEDs in the recesses is easy. Two perfectly fitted brackets are attached inside the gaps with self-adhesive tape. Once the plinths are fitted the LEDs are simply screwed in. The wiring is plug & play and includes all the necessary connections to the existing reverse lights. Installation or de-installation (if necessary) are simple DIY projects because the rear light panels are only clipped in and can easily be removed. Since there are no drill holes or other alterations necessary, there are no permanent traces or damages on the vehicle’s exterior. The high-quality LEDs with their watertight housing and the tough polycarbonate lenses provide more safety for you. The custom-fitted design and the superior components are a real improvement for the overall appearance of the Defender’s rear. Please note:The reverse LEDs come with an E-certificate but we have to emphasize that regulation in the EU prohibits the use of more than two reverse lights on passenger vehicles in regular road traffic. To accommodate these provisions, we are offering perfectly fitted covers for the LEDs to be used on publics roads or for technical inspections.

This bundle consists of 1 x NOLDEN LED work light / reversing light (optionally with 500 or 1,000 lumens)1 x protective grille for Nolden work lights / reversing lights

LED - Reversing light Product information:     LED-LIGHT    PRC7263LED    Reversing lightVehicle:    Defender - 1987 - 2006    Series 3

NCC LED Reverse light A116 Extremely flat and compact LED working / reverse light with a depth of only 30mm. Thanks to the space-saving design and the low cable entry, the headlamp offers the right mounting solution for almost any situation. The illumination is tilted 45 ° downwards, which means that the headlamp provides perfect ambient lighting even in the case of vertical alignment. In addition to standing and suspended mounting, the headlamp can optionally also be mounted on the backside with retaining brackets or directly on vertical surfaces as ambient lighting and all this with only one headlamp design! The variant AR116 / 500 offers 550 +/- 50 lumen with 12 LEDs with only 8 W power consumption.The variant AR116 / 1000 offers 1000 +/- 90 lumens with 24 LEDs with only 14 W power consumption. Both versions meet the ECE R23 guideline and can therefore also be used legally as a back-up light in road traffic. Due to the need of high-performance reverse lights, working headlamps have regularly been used as reverse lights (especially in the truck sector), although this is NOT allowed. With the NCC LED AR116 work / reverse light, this has come to an end and possibly fines or even lost insurance protection are a thing of the past. Due to the exchangeable logo, customer-specific designs are possible. Technical specifications:Measurements: 117x32 mmLEDs & Type: 12 or 24 pieces AR116 / 500; AR116 / 1000; creePower: 12/24 VPower at 12V: AR116 / 500 with 8 W and AR116 / 1000 with 14 WMounting points: 4x M6 and 1x M10Weight: 350 gCertification: ECE R10, ECE R23Material housing: ABSMaterial light disc: PCTemperature range: -40 ° C - + 80 ° CPlug: English DT15-2P or open cable ends Other features:45 ° downward illumination for optimum ambient lighting only 30mm depthUniversal 12 / 24V (Multivoltage 9 V - 33 V)durable LED and electronics with 30,000 hours of lifeimpact-resistant plastic housing, with optimum corrosion resistanceimpact resistant and hardened polycarbonate front screenwater- and dust-tight according to IP 68 & IP6K9KRadio and radio interference suppression according to ECE R10 and CISPR 25 Level 5Temperature monitoring and protection against overheating2 m connection cable for free plug assembly

NCC LED Reverse light A116 Extremely flat and compact LED working / reverse light with a depth of only 30 mm. Thanks to the space-saving design and the low cable entry, the headlamp offers the right mounting solution for almost any situation. The illumination is tilted 45° downwards, which means that the headlamp provides perfect ambient lighting even in the case of vertical alignment. In addition to standing and suspended mounting, the headlamp can optionally also be mounted on the backside with retaining brackets or directly on vertical surfaces as ambient lighting and all this with only one headlamp design! The variant AR116 / 500 offers 550 +/- 50 lumen with 12 LEDs with only 8 W power consumption.The variant AR116 / 1000 offers 1.000 +/- 90 lumens with 24 LEDs with only 14 W power consumption. Both versions meet the ECE R23 guideline and can therefore also be used legally as a back-up light in road traffic. Due to the need of high-performance reverse lights, working headlamps have regularly been used as reverse lights (especially in the truck sector), although this is NOT allowed. With the NCC LED AR116 work / reverse light, this has come to an end and possibly fines or even lost insurance protection are a thing of the past. Due to the exchangeable logo, customer-specific designs are possible. Technical specifications:Measurements: 117x32 mmLEDs & Type: 12 or 24 pieces AR116 / 500; AR116 / 1000; creePower: 12/24 VPower at 12 V: AR116 / 500 with 8 W and AR116 / 1000 with 14 WMounting points: 4x M6 and 1x M10Weight: 350 gCertification: ECE R10, ECE R23Material housing: ABSMaterial light disc: PCTemperature range: -40 ° C - + 80 ° CPlug: English DT15-2P or open cable ends Other features:45° downward illumination for optimum ambient lighting only 30 mm depthUniversal 12 / 24V (Multivoltage 9 V - 33 V)durable LED and electronics with 30,000 hours of lifeimpact-resistant plastic housing, with optimum corrosion resistanceimpact resistant and hardened polycarbonate front screenwater- and dust-tight according to IP 68 & IP6K9KRadio and radio interference suppression according to ECE R10 and CISPR 25 Level 5Temperature monitoring and protection against overheating2 m connection cable for free plug assembly Please note: the protective grilles shown in the pictures are not included in the scope of delivery.

VX120R-WD with ECE certification Technical data Round version: 14 high-power OSRAM LEDs VX120S-WD with ECE certification Technical data of square version: 13 high-power OSRAM LEDs   Technical data for both versions: Fully ECE-compliant reversing light function (ECE R23) Improved rear view: Up to 36 m light beam with 45 ° beam angle Lightweight design: Thermal plastic housing with unbreakable polycarbonate lens Integrated Deutsch connector Integrated driver and thermal management system for superior lamp life Light distance at 1lx: ~ 36 m Hot lumen: 1,100 lm Colour temperature: 6,000 K Beam angle: 45 ° Rated input power: 15 W Input voltage: 12 / 24 V IP protection: IP69K ECE: R23 EMV / EMI: ECE R10 Can be mounted upright, suspended or sideways.

Protective grille for Nolden worklights  When investing in high quality gear, of course, you want it to last as long as possible. In order for your Worklights to be protected in the best way possible this protective grille is going to ensure the durability of your Nolde Worklights. Material: stainless steel, black powder-coated

Truck-Lite LED reversing spotlight The reliable Truck-Lite LED with E-approval mark actively supports you in illuminating your working area. The reversing spotlight is available in a square or round design (selectable above under "Design"). Technical data:    Voltage: 12/24 V    Length of cable harness: 0.25 m    Lumen: 800

Vision-X Duralux reversing spotlight Compact, approved reversing spotlight with 4 LEDs (4 W each), with E-mark, waterproof according to IP68 standard, 1,350 lumens (raw), 968 lumens (effective), aluminium housing.Technical data:Luminous flux: 1,350 lumens (raw), 968 lumens (effective).Waterproof: according to IP68 standardVoltage: 11-65 VPower consumption: 1.67A@12VMaterial: aluminium housing, polycarbonate front screenDimensions: 100x65,5x107,6 mmWeight (net): 680 grams

Vision-X Overland 3 Reversing Light The Vision X Value Line LED series offers excellent light output in a robust housing with a functional design for versatile applications.This headlamp is tested and approved as a reversing light.The brand new Vision X Overland light is the perfect solution for lighting large areas.With its low-profile design, the Vision X Overland light mounts perfectly under most rack systems and is perfect for illuminating wide-ranging areas with its 60/40 floodlight optics. With a power consumption of only 15 watts and a light output of 1,140 lumens, the headlamp can be used without having to start the vehicle.The waterproof and dustproof ventilated housing prevents moisture build-up and makes these lamps the perfect off-road lighting.Technical data:     LEDs: 3 x 5 watts     Housing material: aluminium     Light colour temperature: 6000 Kelvin     EMC/EMI approval: CISPR25 class 3     Dimensions: 119/72/51mm     Weight: 0,5 kg     Voltage: 9-32V DC     Current: 0.65A@24V DC - 1.25A@12V DC     Vibration class: 21 grams     Lens material: polycarbonate     Certifications: CE, RoHS, IEC 62471, ECE R23 (E-MARK)        Lumen (raw): 1.140 lm     Lumen (effective): 797 lm     Beam pattern: 60° / 40° mixed    Thanks to the single-bolt bracket, the LED headlamp can be easily adjusted and mounted. High-quality housing components give the VL series the robustness to withstand daily demands and harsh conditions.Built-in reverse polarity protection helps prevent accidental damage due to incorrect installation.