OptiMATE solar kit, panels with intelligent charging / monitoring controller
The highly effective solar charger (solar impulse charging system), with which even deeply discharged batteries can still be saved and protected. It guarantees safe and intelligent charging, as the OptiMATE solar battery charging system automatically switches between continuous charging or impulse charging, depending on the sunshine. OptiMATE analyzes the state of the battery the next day and either continues charging or - in the case of a defective battery - optimizing. Safe long-term maintenance without overload risk. Automatic shutdown in case of a short circuit or as soon as the battery is disconnected.
Excellent safety for battery and vehicle electronics
Easy monitoring of the battery condition with the help of the monitor display, which updates every 3 seconds. (Current requirement <0.5 mA). With this battery charging system you get a worry-free package, mobile, portable, intelligent. The system is suitable for standard, AGM, EFB and gel batteries. The delivery takes place with battery pole terminals and ring eyelet connections, with German instructions and 4 suction cups. The solar systems are manufactured in high quality in South Africa (made in South Africa).
Product Information Solar Panels - Solar Charger
Information about the solar panels:
Power:
40 watts (max.)
60 watts (max.)
80 watts (max.)
Voltage: 12 V nominal, 22 V maximum
Uses: exterior / interior
Version: High quality aluminum frame (weatherproof) with 4 mounting brackets, output cable 200cm with SAE connector
Information about the OptiMATE charging / monitoring controller:
Charging current:
3.3A from 40W panel (max average current), 3-5 A pulse current
5A from the 60 W panel (max average current), 3-5 A pulse current
6.67A from the 80W panel (max average current), 3-5 A pulse current
Use: indoor / outdoor (lowest temperature: -20 ° C.
Economy mode: Start with low 1 V voltage
Suitable for: STD, AGM and GEL 12 V batteries with 2 - 240 Ah.
Input: 15 - 22 V
Version: Weatherproof charge controller housing with mounting holes and loops (for Velcro or Ziptie). Solar panel SAE input terminal and 100cm output cable connected to the battery with the supplied weatherproof battery cable and the standard battery terminal set.
Dimensions (corner brackets included):
40 Watt Panel: Width: 42.9cm / 16 7/8 "Height: 68.6cm / 27" Depth: 3.3cm / 1 1/4 "
60 Watt Panel: Width: 65.9cm / 16 7/8 "Height: 68.6cm / 27" Depth: 3.3cm / 1 1/4 "
80 Watt Panel: Width: 68.5cm / 27 "Height: 78.1cm / 30 3/4" Depth: 3.3cm / 1 1/4 "
Optimum security: There is no risk of overloading. Absolutely safe for the vehicle electronics. Radio suppression. Safe for long-term battery maintenance. Automatic shutdown in case of short circuit or disconnected battery.
The panel is e.g. ideal for our mobile heating system.
Please note: When used for a cool box, a buffer is necessary because the starting current is too high.
https://www.youtube.com/user/TecMate1/about
Made in South Africa
- Do you have any questions concerning this product?
- OptiMATE Solar Bedienungsanleitung - Instructions - Manual
- Further products by TecMate S.A.