Switches, Panels and Consoles

Adapter for connecting 2 Alan PL259/6 plugs

Adapter for connecting 2 Alan PL259/6 plugs.

Product number: NA5060

Weight: 0,2 kg
Parcel shipping

Available from stock - delivery time 1-3 working days**

€1.30*

BlueSea Below deck panel, waterproof

Mounting panel with switch, double USB socket and 12 V socket.Pre-wired, 12 V socket up to 15 A loadable, USB socket up to 2.1 A loadable. Simple connection with only two cables! Waterproof Dimensions see drawing.

Product number: NABS4363

Weight: 1,0 kg
Parcel shipping

Available from stock - delivery time 1-3 working days**

€79.00*

BlueSea Heavy Duty Battery Switch with AFD

Suitable for up to 32 V, continuous load: 500 A, load capacity 700 A/5 minutes, 4 switching positions, suitable for cables up to 95 mm², waterproof according to IP66 standard, suitable for mounting and installation.

Product number: NABS3003

Weight: 2,1 kg
Parcel shipping

Delivery time 5-10 Tage

€154.00*

Carling Contura button with rubberised surface

Carling Contura rubberised push-button As a replacement for existing push-buttons, does not replace a complete switch, allows for unerring operation of the switches under all conditions.The buttons are exchanged for the originals.

Product number: SWCARUBCVR

Weight: 0,1 kg
Parcel shipping

Available from stock - delivery time 1-3 working days**

€4.00*

Carling Contura switch for cable winch, with mechanical protection

Carling Contura switch for winch, with mechanical protection. For controlling a winch relay, MOM/OFF/MOM switching,The switch offers the possibility to extend and retract the winch cable as well as a mechanical protection against accidental operation. The switch is used to control an existing relay box of the winch, this is not included!We recommend the additional combination with our switching relay, which switches the winch currentless. In this way, you can relaise a complete winch control with only two compact switches, combining comfort and safety.

Product number: SWCAWNCHL

Weight: 1,0 kg
Parcel shipping

Available from stock - delivery time 1-3 working days**

€29.00*

Carling Contura Switch Mount for Carling and Nakatanenga Switches

These mounts are used to properly mount switches measuring 21x37 mm (e.g. switches by Nakatanenga, Carlingtech or ARB). They are stackable, that means you can group 1 to X switches - that's why there are mounts either for mid-section or end-section. End sections are the same for either side. We also offer ready-made mounts for 1 or 3 and 6 gang, as well as switch blanks to blank of unused mounting holes. Please choose.

Product number: CTMF-ENDM

Weight: 0,1 kg
Parcel shipping

Available from stock - delivery time 1-3 working days**

From €4.00*

Select version

Carling Contura switch, hazard warning switch

Carling Contura hazard warning switch available in: black and red - please select the desired color

Product number: SWCAHAZA-BLKM

Weight: 0,5 kg
Parcel shipping

Available from stock - delivery time 1-3 working days**

From €39.00*

Select version

Carling Contura Switch, Momentary On/Off/Momentary On

Carling Contura switch, Momentary On/Off/Momentary On 3 switch positions; middle position = OFF, bottom/top = ON; after actuation, the switch automatically returns to the middle position.The green switch location lighting matches the defender-typical cockpit lighting, and the orange switch status indicator is particularly easy to recognise. This colour coding of the switch statuses is manufactured especially for us by MUD, UK, and is not available in this form from MUD.

Product number: SWCAMOMO

Weight: 0,1 kg
Parcel shipping

Available from stock - delivery time 1-3 working days**

€27.00*

Carling Contura Switch, OFF/ON/ON

Carling Contura switch, OFF/ON/ON The green illumination of the switches matches the typical defender cockpit lighting, the orange switch status indicator is particularly easy to recognise. This colour coding of the switch statuses is manufactured especially for us by MUD, UK, and is not available in this form from MUD.

Product number: SWCAMOFONON

Weight: 0,1 kg
Parcel shipping

Available from stock - delivery time 1-3 working days**

€22.00*

Carling Contura Switch, On/Off/On

Carling Contura Switch, On/Off/On 1 Piece

Product number: SWCAMOOO

Weight: 0,1 kg
Parcel shipping

Available from stock - delivery time 1-3 working days**

€29.00*

Carling Indicator light

Indicator light with 2 LEDs, controlled separately, available in a variety of colors, compatible with the Carling mounting frame and labeling, 6.3 mm connectors. Using the mounting frame the light switches also fit into the DIN slot underneath the glove box of the Td4, into the console between the vents or into the console on the roof. --select color--

Product number: CTWL-RRM

Weight: 0,1 kg
Parcel shipping

Available from stock - delivery time 1-3 working days**

From €19.00*

Select version

Carling tool for switch assembly

Carling tool for switch assembly Original tool for disassembling the Carling Contura switches.If you want to change the cover / touch surface, you need one tool.If you want to remove the switch from the frame, you need this tool twice - see picture.

Product number: SWCTOOL

Weight: 0,1 kg
Parcel shipping

Available from stock - delivery time 1-3 working days**

€9.00*

Carling, Contura Switch, ON/OFF

2 switch positions; ON / OFF The green illumination fits the Defender dashboard lighting, the orange ON-position light is readily visible. This special colour coding of the switch positions is produced by MUD UK especially for us and is not available in this setting even at MUD.

Product number: SWCAONO

Weight: 0,1 kg
Parcel shipping

Available from stock - delivery time 1-3 working days**

€23.00*

Defender One Touch Indicator Upgrade, DA2868

Comfort turn signal retrofit kit for Land Rover Defender until MY2016

Defender One Touch Indicator Upgrade Defender - from late 300Tdi to current 2016 -2.2TDciThis complete plug and play upgrade adds the functionality of new vehicles equipped with lane change or 3 flash indicators to your Defender. With a simple momentary press of the indicator stalk the indicators will flash 3 times.Note - Please check on 300Tdi models you have the later style wiring connectors to confirm this you will need to remove the lower steering cowl.

Product number: DA2868

Weight: 0,2 kg
Parcel shipping

Available from stock - delivery time 1-3 working days**

€239.00*

Connector / mating connector for Land Rover Defender switch OEM Style

Connector / mating connector for Land Rover Defender switch OEM Style Suitable connector / mating connector for switch YUG000540LNF / YUF500150LNF / YUG102440 or our OEM style switches Scope of delivery: connector incl. contacts As spare part for our switches: Switches for Land Rover Defender & Discovery Switch with bezel for Land Rover Defender & Discovery Land Rover Defender OEM switch auxiliary headlights

Product number: NAYPC10523

Weight: 0,5 kg
Parcel shipping

Available from stock - delivery time 1-3 working days**

€18.00*

Disconnector emergency stop, 500A load capacity

Emergency stop switch, 500 A load capacity Emergency stop switch for quick disconnection of electrical connections, for currents up to 500 A, for 12 V on-board voltage, incl. cover cap.Technical data:max load : 500 Avoltage: 12 VMounting hole spacing: 65 mmTotal height: 128.5 mmWidth: 86 mmMounting depth: 38 mmArticle is similar to the illustration.

Product number: TS500

Weight: 1,0 kg
Parcel shipping

Available from stock - delivery time 1-3 working days**

€19.00*

Land Rover Defender OEM auxiliary light switch

Original light switch for Land Rover Defender TD5 from MY 2002 and TD4 for auxuliary driving lamps, fits to exisiting mounting place, comes with required counterpart YPC10523 with electical pins to fit a cable.

Product number: YUG000540LNF-KIT

Weight: 1,1 kg
Parcel shipping

Available from stock - delivery time 1-3 working days**

€98.00*

Land Rover Defender Td5 / Td4 light switch

Light switch Land Rover Defender Td5/Td4 For all models from (VIN) VA104806 to EA999999

Product number: NA-AMR6104

Weight: 0,2 kg
Parcel shipping

Available from stock - delivery time 1-3 working days**

€31.00*

Mounting panel with 12V socket and quick connector (Anderson style)

Panel mit 12V Buchse und Schnellverbinder Montagepanel mit 12V Steckdose und Schnellverbinder (Anderson Style)12V Buchse bis 15A belastbarSchnellverbinder (Anderson Style) bis 50A belastbarDer Schnellverbinder ist kompatibel mit unserem QC-S SchnellverbinderOptional Schnellverbinder als Ersatz- und / oder Gegenstecker einzeln hier erhältlich:QCGRY-S

Product number: EBQC50A12VD

Weight: 0,3 kg
Parcel shipping

Available from stock - delivery time 1-3 working days**

€19.00*

OEM style switch panel

Switch covers OEM Style for Land Rover Defender and Discovery Extend your vehicle console with additional switches in OEM style. Please select the desired variant. Without switch. Matching switches / push buttons can be found here.

Product number: SWIKI10308SM

Weight: 0,3 kg
Parcel shipping

Available from stock - delivery time 1-3 working days**

From €13.00*

Select version

ON/OFF toggle switch, with pilot light, in installation housing

ON/OFF switch with control light

ON/OFF switch with pilot light in round recessed housing ON/OFF switch with red control light in round installation housing.The switch can also be easily exchanged for our rocker switches with location lighting or other rocker switches in this format.Load capacity: 12V 10A / 24V 6AHole diameter bore: 29mm

Product number: WSMBBS

Weight: 0,1 kg
Parcel shipping

Available from stock - delivery time 1-3 working days**

€10.00*

Panel for socket with round housing, mounting panel

Panel for sockets with round housing

Panel für Buchsen mit Rundgehäuse und Schnellverbinder Montagepanel für Buchsen mit Rundgehäuse wie z.B. unserer 12V Steckdose oder unseren USB Steckdosen und Schnellverbinder (z.B. unseren QC-S Stecker, Anderson Stecker oder Anderson Style Stecker)Schnellverbinder erhalten Sie hier:QC-S Elektrostecker klein 12/24V 2-poligQCGRY-S Schnellverbinder (Anderson Style)Hier erhalten Sie Buchsen mit Rundgehäuse:NA12V Einbausteckdose 12VNA2USB42 Doppel-USB SteckdoseWSMBBS Schalter mit Kontrollleuchte NADOUSB-C Doppel-USB C Steckdose inkl. Spacer

Product number: EB3QC

Weight: 0,1 kg
Parcel shipping

Available from stock - delivery time 1-3 working days**

€8.00*

Power distributor with fuse holder and earth connection for 6 circuits

Power distributor with fuse holder and earth connection for 6 or 12 circuits

Power distributor with fuse holder and earth connection for 6 or 12 circuits Compact fuse, connection and distribution box for up to six or twelve separately fused circuits with a load capacity of up to 30 amps per consumer and voltages of up to 32 volts. This makes the holder suitable for a wide range of vehicles, from classic cars with 6 V electrical systems to trucks with 24 V electrical systems.The fuse box also serves as a distribution or collection system for the earth connection. Difficult-to-locate electrical and electronic problems due to a bad earth wire of the bodywork are thus significantly minimised - especially for Land Rover Defender models from model year 2007 onwards (Td4 engine) this is a good investment! A ground cable is then fed back to the battery from the ground collection point.The distributor is the cornerstone of a neatly constructed and fused electrical system in the vehicle and should be fitted right at the start of Defender ownership if possible. The distributor itself must also be fused - no more than 30 cm from the battery, with max. 125 A - for this we recommend the fuse holder up to 200 A as well as the matching 125 A MIDI strip fuses.Another feature is an LED indicator for each circuit, which indicates a defective fuse when it lights up. The scope of delivery also includes stickers for various consumers to make it easier to assign the respective connections. Scope of delivery:- Fuse holder for optionally up to 6 or 12 circuits.- Clear plastic cover with inset labelling fields- Delivery without fuses

Product number: SVFB-6M

Weight: 0,3 kg
Parcel shipping

Available from stock - delivery time 1-3 working days**

From €39.00*

Select version

Remote switch with relay for winches

For safety reasons, it is advisable to switch off the electric winch on the off-roader and only switch it on when needed. This is usually done with a disconnect switch in the engine compartment, so that awkward handling is necessary when you want to start the winch. With the switching relay and the switch supplied, this can be done conveniently from the driver's seat without having to lay the winch's power cables there. Only two thin wires are needed, the required switch is included in the delivery, the switching relay is mounted in the engine compartment. It has an additional switch directly on the relay housing and does not consume any power when it is not being switched. A recessed labelling field allows easy identification of the relay. The switch is a very high quality Carlingtech Contura switch (waterproof to IP67 standard), this fits seamlessly into our mounting frames or various consoles such as in the Land Rover Defender TD4 or other vehicles. The relay is designed for a continuous load of 500 A, please check if this is suitable for your winch. According to the manufacturer, a Warn 9.5XP requires 425 A, a Tabor 12K 457 A and the Warn 8274-50 450 A. Technical data:Maximum load capacity (continuous): 500 AMaximum load capacity (5 minutes): 700 AMaximum load capacity (1 minute): 1,100 AMaximum load capacity (10 seconds): 2,500 AVoltage: 10.1-16.5 VCurrent consumption in idle position: 0 mACurrent consumption during switching: less than 7 AConnections: 2x M10 screw boltsDimensions relay: 96x139x52 mmSwitch dimensions: 36x21 mm mounting holeSwitching capacity of the switch: max. 20 A

Product number: NABS7700

Weight: 3,0 kg
Parcel shipping

Available from stock - delivery time 1-3 working days**

€295.00*

Jeep Ausrüstung: für Individualisten!

Jeep Zubehör: perfekt ausgerüstet!

Jeep Ersatzteile, Umbauten und Zubehör