Skip to main content
Fast dispatch
Individual counselling
Rapid processing of enquiries
Technical advice: +49 9181 466 644
Filter
Air intake Bravo Snorkel for Suzuki Jimny GJ/HJ, from year of manufacture 2018
Snorkel for Suzuki Jimny GJ/HJ, from year of manufacture 2018 The snorkel not only enables safe passage through deeper water with reduced risk to the engine, it also brings advantages in dusty environments: The increased air intake at roof level ensures cleaner, less dusty air, and the air filter needs to be replaced or cleaned less frequently.
Product number: SSJN
Weight: 3,5 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

€474.00*
Alpha 9.9 winch system for Suzuki Jimny FJ
The Power Winch System Beta for the Suzuki Jimny The winch system was developed especially for the Suzuki Jimny and fits very well into its front. It is mounted on the original points of the vehicle. The Alpha 9.5 winch was developed especially for users who have little space available. Despite its compact design, the winch has a pulling force of 4.3 tonnes. Technical data: Gearbox: 3-stage planetary gearMax. Pulling force: 4,300 kgMax. Pulling speed: 7 m/min*Engine power: 3.7 hpEngine type: Series Wound**Reduction ratio 230:1Max. Power consumption: 365 ampsVoltage: 12 VRope (∅ x length): 8 mm x 30 mDrum (∅ x length): 63 x 120 mmOverall size (LxWxH): 437 x 160 x 250 mmWeight cable winch: 22.5 kgInstallation time: 4 hours Features: Motor IP67 sealed by groove with sealing ringFreewheel leverStainless steel cross bracesReinforced cable drumPowder-coated aluminium die-cast housing Motor/gearboxInternal drum brake with 3 brake shoesRemovable control unit (so that the control unit can be installed as required)Reinforced, powder-coated contactor housing made of deep-drawn sheet metal Scope of delivery: Installation set Cable winch Aluminium cable window Fastening screws Plastic rope with hook Pulley with hook Cable remote control Radio remote control Operating instructions TÜV parts certificate Attention:Please note that our cable winches may only be used for ground pulling and are not suitable for lifting!The operating instructions for the cable winch must be read completely before use and must be strictly followed, otherwise there is a risk of injury!Warranty:We grant a warranty of 3 years on the gear and drum of the cable winch in compliance with the warranty and service regulations.Note:You will find all the important information about handling your new winch in the operating instructions and from your specialist dealer.This winch may generate more noise.
Product number: HSW9900JIMX
Weight: 25,0 kg
Freight forwarding

Delivery time 5-10 working days

€2,499.00*
Anti-slip pads for CargoBear
Self-adhesive anti-slip pads Perforated metal sheets, as used on our CargoBear roof racks, on ladders, steps and other climbing aids on vehicles, are much safer than regular metal surfaces. Additional anti-slip pads, however, offer an unbeatable safety advantage, especially in wet or dirty conditions. The anti-slip pads are designed to perfectly match the hole patterns and due to its black color, they also compliment the overall look of our products. The material for the pads originates in the sports sector and has been widely used on skateboards, for example. For the CargoBear, we offer ready-cut, self-adhesive anti-slip pads measuring 16 x 24 cm individually or in sets of 3, 6 or 12. Please note: the multi-packs provide increasing savings regarding the price per item. Since the pads are manufactured with in-house laser cutting technology, we can supply custom formats on request.
Product number: ARS-CGBM
Weight: 0,1 kg
Parcel shipping
This article is available in different versions

From €14.00*
Cargo net incl. fixing material, Suzuki Jimny II type GJ/HJ
Cargo net incl. fixing material, Suzuki Jimny II The smaller the car, the bigger the challenge to make the best use of available space inside. Our cargo mesh for the Suzuki Jimny II (from MY2018) will generate a lot of storage room in a place that’s rarely used: under the roof in the cargo bay.To attach the 93 x 60 cm netting to the roof trim, all you need to do is mount two aluminum frame elements in the front and the back. They are the same color as the mesh for a seamless look. The elastic cargo mesh can then be attached to the frame and the interior grab handles with 12 adjustable straps. To make it easier for you to fill the mesh space, there are also two click buckles in the front for easy access.Light and flat pieces of equipment, sleeping bags, textiles and the like will find the perfect storage space inside the mesh, even in a fully loaded Jimny.If you do not have handles on the headlining, 2 ring nuts are supplied to attach the net. Additionally, you can thread an elastic string in a zigzag shape on the underside of the netting for all those lighter items you want quick access to: light blankets, towels, swimming or sports gear etc.The cargo mesh comes in the colors black, gray and coyote. Please note: When ordering, please be sure to state in which model (GJ or HJ) you would like to install the Cargo Net, and also whether you have an interior light (Comfort Plus equipment) in the GJ model. Pictures may vary.
Product number: CN-SUJI2-BLKM
Weight: 2,0 kg
Parcel shipping
This article is available in different versions

From €249.00*
CargoBear 2.0 crossbar - for Suzuki Jimny 2, GJ
CargoBear Roof Rack Crossbar Pack a bear on your roof, the CargoBear! Or, in this case, our new bear cub. The modular roof rack system that has revolutionized the attic conversions on top of Defenders and G-Wagons is now also available for the Jimny II. The small workhorse from Suzuki is a big performer but has one major disadvantage: the Jimny – due to conceptual constraints – suffers from massive lack of space on the inside. Farmers, foresters and other friends of the 4x4 quickly reach the limits of the Mini-Defender when storing tools and equipment. With the CargoBear for the petite Japanese, there is now a modular and highly flexible roof rack that can be individually adapted to your needs. And what’s best: the CargoBear can grow with your tasks. The key elements in our modular concept are the deep black, high-quality powder-coated crossbeams made of aluminum-magnesium alloy. They are entirely Made in Germany and two or three of these cross bars already make up a sturdy and highly versatile roof rack with a great number of lashing points and custom extendability. Longer gear like ladders, ski or surfing equipment, kayaks and many other objects can be transported safely and securely on the roof of the little grasshopper. If your requirements grow over time, you can always turn the bare crossbeam structure into the full platform by adding the remaining panels, the wind deflector and the end bracket. The cross beams are supplied with two clamps each and all the necessary fastening material. Material: Aluminum-Magnesium-Alloy (AlMg3), high-quality powder-coated Color: Deep Black RAL 9005Width: 1,346 mm (1,313 mm usable space) Measured from the gutter, the CargoBear is approx. 15 cm high. On the roof it is approx. 5-6 cm - depending on the roof, condition, year of construction etc. Suitable for all Cargobear 2 roof racks
Product number: CGB2-SUJI2-LB1M
Weight: 4,0 kg
Parcel shipping
This article is available in different versions

From €299.00*
CargoBear awning holder for Jimny 2 GJ / HJ roof rack CargoBear
One of the best moments when car camping or attending a 4x4 meeting is when you unfold your side awning from the roof rack. It means you’ve arrived and all the enjoyment is ahead of you. Sheltered by the tarp, you can rest easy in your camping chair, put your feet up and think about the things to come over a coffee or a cold one. Since there is now a CargoBear for the Jimny II, you can also mount a variety of car awnings on it. Our mounting brackets are made from black powder-coated stainless steel and are fixed to the lateral incline of at least two CargoBear cross bars. They fit amongst others the RoofLodge Awning, RhinoRack Foxwing and RhinoRack SunSeeker. All fixing materials to the roof rack are included. Not included is the fastening material for the awnings themselves. suitable for all CargoBear 1 + 2.
Product number: CGB2-SUJI2-MH
Weight: 1,0 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

€54.00*
CargoBear Rear ladder for Suzuki Jimny 2 type GJ BJ 2018 / HJ
Rear ladder for Suzuki Jimny 2 type GJ BJ 2018 / HJ Boxier, tougher and even more capable, that’s the Suzuki Jimny 2 (GJ/HJ MY 2019). Even if cargo space has grown considerably in comparison with the previous model, optimizing your usable load capacity is still crucial if you want to get the most out of this little giant. Considering the limited interior that means first and foremost to use the roof space to the full extent: either with our own dedicated CargoBear system for the Jimny or any other conventional roof rails, bars or racks. Whatever solution you prefer, our light and strong aluminum ladder makes accessing the roof area a lot easier. Climbing to the rooftop is safer, more comfortable and allows for stress-free loading, fastening or strapping down of your cargo. The ladder is mounted on the tailgate only and has no connection with the roof or the rack, making it ideal for all kinds of carrier systems. Additionally, there is no need to drill holes either as the ladder is custom-designed to fit existing mounting points and screw holes: on the spare wheel mount, the tailgate’s drip rail and the bottom right door hinge. This also allows for quick and easy de-installation without damage or marks. The ladder is made from high-quality aluminum and features black powder coating – a perfect match for our modular CargoBear roof rack system.
Product number: CGB2-SUJI2-LADDER
Weight: 2,0 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

€329.00*
CargoBear Storage rack for Suzuki Jimny 2 (GJ/HJ), BJ 2018
CargoBear Storage rack for Suzuki Jimny 2 (GJ/HJ), MY 2018 A volume of up to 863 liters will fit into the back of your Jimny GJ. Sounds like a lot for the size S hardcore off-roader. But wait: how much of it can you actually use? Only rarely will you load big items in one piece – let’s say a fridge for example – into the cargo space of the little 4x4 and that’s the problem. The Jimny is mostly a specialized working vehicle for farmers, forest workers and hunters. That means, there’s always lots of tools, fuels, lubricants, equipment, feed bags and dirty clothes that you don’t want to pile up on the small surface area of the cargo hold. Add animals – dead and alive – to the mix and you get the picture.Once we’ve spotted this particular problem, we immediately set to work on it and are now offering a mini-version of our CargoBear system specifically for the back of the Jimny GJ/HJ. This rack effectively partitions the narrow but high cargo space and lets you load many more items much more effectively. Rough and dirty things below, tools, equipment, jerry cans, boxes etc. on top of the shelf.As with our CargoBear roof racks, the cargo shelf is made from robust, powder-coated aluminum plates. Raised edges, non-slip perforation and a great number of lashing points guarantee 100% secure transport.When you’re installing our Tiny Bear cargo rack you can use the pre-existing screw holes. There’s no need for drilling new ones. But you should keep the spare seats in the back down or remove them entirely. Who’s packing back-seat passengers into a Jimny anyway?All fastening material is included.Material:Aluminum, powder-coated blackWeight:6,6 kgMax. load:up to 50 kg  
Product number: ABLATRA-SUJI2
Weight: 8,0 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

€479.00*
CargoBear system roof rack incl wind deflector and end carrier - for Suzuki Jimny 2, type GJ / HJ
Variant: with end support (front and rear)
Pack a bear on your roof, the CargoBear! Or, in this case, our new bear cub. The modular roof rack system that has revolutionized the attic conversions on top of Defenders and G-Wagons is now also available for the Jimny II GJ / HJ. The small workhorse from Suzuki is a big performer but has one major disadvantage: the Jimny –  due to conceptual constraints – suffers from massive lack of space on the inside. Farmers, foresters and other friends of the 4x4 quickly reach the limits of the Mini-Defender when storing tools and equipment. With the CargoBear for the petite Japanese, there is now a modular and highly flexible roof rack to individually adapt to your needs. The CargoBear’s flat roof silhouette reduces aerodynamic losses and the modular design protects the car’s roof and body by effectively absorbing torsion forces. The deep black, high-quality powder-coated CargoBear modules made of aluminum-magnesium alloy are manufactured entirely in Germany. The bear’s skeleton is made up of either two or three crossbeams. The beams also work by themselves as roof racks. Two panels fit each segment between a pair of crossbars, creating either a short or a full platform over the entire length of the roof. An accompanying wind deflector at the front further improves the aerodynamics of the roof rack, which is already very flat, and offers the possibility of mounting the Osram SX180 or SX300 light bars via special holes. For the rear, an end carrier is included for mounting additional headlights, handles or other accessories. The modular structure over the entire area allows for a flexible yet precise arrangement of lashing points, thereby making your roof load much more secure. Fittings are inserted in the lashing grid on the side or on top of the rack. Single stud fittings are recommended for lighter loads. If it gets heavier, choose ring fittings with double studs. As the name implies, two studs instead of one are inserted into the lashing grid, effectively halving the forces exerted on each point in the grid. The CargoBear’s panels feature a perforated non-slip design, contributing further to your load safety. The modules are supplied with all the necessary fastening material. Wind deflector and end carrier are included in the scope of delivery. Measured from the gutter, the CargoBear is approx. 15 cm high. On the roof it is approx. 5-6cm - depending on the roof, condition, year of construction etc.
Product number: CGB2-SUJI2-MAUWIND
Weight: 30,0 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

€1,990.00*
CargoBear wind deflector for Jimny 2 CargoBear roof racks
Wind deflector suitable for CargoBear 2.0 Suzuki Jimny 2 (GJ) Material: aluminum, black matt powder-coated Incl. mounting material
Product number: CGB2-SUJI2-WIND
Weight: 1,5 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

€169.00*
Checker plates for rear bumper, Suzuki Jimny II, 1 pair
Checker plate supports rear TREKFINDER for SUZUKI Jimny II from MY 2018 for the rear bumper corners on the right & left side. Scope of delivery: 2 pieces aluminium chequer incl. stainless steel screws. Material thickness: 2.5 mm basic thickness / 4 mm incl. chequer (quintet plate)  
Product number: 1-SUJI2RBS-H
Weight: 0,8 kg
Parcel shipping

Delivery time 5-10 working days

€59.00*
Chequer plate supports Suzuki Jimny, type GJ / HJ
Chequer plate supports for Suzuki Jimny 2 by TREKFINDERSuitable checker plate supports for SUZUKI Jimny 2 from 10/2018 (model GJ / HJ)Material: Aluminium AlMg3 sea water resistant For mounting on the front bumper, right & left side. (see product pictures)The product can be painted by you or coated with RAPTOR paint. Supplied in pairs incl. screws.
Product number: 1-SUJI2RBS
Weight: 2,5 kg
Parcel shipping

Delivery time 5-10 working days

€59.00*
Door handle shells TREKFINDER for SUZUKI Jimny II from 10/2018, Typ GJ and HJ right & left side
Door handle set TREKFINDER for SUZUKI Jimny II type GJ from 10`18 and type HJ for the right and left side - plastic black.
Product number: 1-SUJI2TST
Weight: 0,5 kg
Parcel shipping

Delivery time 5-10 working days

€35.00*
Door protection strips TREKFINDER for SUZUKI Jimny II from 10/2018, typ GJ an HJ, right & left side
Door guard set TREKFINDER for SUZUKI Jimny 2 from 10`18, Typ GJ and HJ for the right and left side.
Product number: 1-SUJI2SLT
Weight: 4,0 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

€79.00*
Front winch system Suzuki Jimny GJ/HJ
Front winch system Suzuki Jimny GJ/HJ TÜV certificate for road approval in DE / AT The winch system with 2 tons traction was completely integrated. The small power pack is equipped with a 25 m plastic rope. Easily operated via radio or cable remote control, both of which are included in the scope of delivery. The winch assembly was designed so that the mounting kit only uses original attachment points from the vehicle, so there is no need to drill or flex. Scope of delivery: Cable winch 2 to 25 m plastic cable  cable harness  complete cable winch control radio remote control (supplied without battery)  cable remote control mounting plate complete with installation material  installation material  installation & operating instructions  TÜV parts certificate.
Product number: HSW9940JIMIIX
Weight: 50,0 kg
Freight forwarding

Delivery time 10-15 working days

€1,699.00*
Front wind deflectors (1 set) for driver and passenger side Suzuki Jimny 2, ab Bj 2018, smoke grey
Off-road vehicles are not designed for aerodynamically perfect airflow. So far, so obvious and normally it doesn’t matter anyway because in a 4x4 you’re unlikely to reach the speeds where it becomes problematic. But there is one aspect where the rustic box shape of Jimny 2 does show the effects of aerodynamic neglect and that’s the nearly rectangular shape and the straight and vertical positioning of the windows. There’s more than one reason in a 4x4 to crack your windows a little, whether you’re off-roading or it’s cold and wet. Your classic Jimny windows for instance are misting up because the ventilation famously isn’t up to the job of defogging them. And that’s when you see the effect we’ve talked about in the beginning. The drag around the cracked windows is not only loud, it also pulls more dust and water inwards and that’s pretty annoying, even for hardcore off-roaders. Wind deflectors by ClimAir for Jimny 2, offer the perfect solution. Their tailor-made fit and robust build guarantee improved intake of fresh air and better climatic conditions inside the vehicle all year round while protecting the windows. Made from high-quality acrylic glass, the deflectors reliably keep out rainwater and snow, whether the car is being driven or parked somewhere. On hot days, you can prevent heat build-up in the car by leaving the window cracked open – a huge improvement for children and pets alike when travelling or while waiting in a carpark. Smokers and especially their passengers will also appreciate the fresh air. ClimAir wind deflectors are available in smoke grey and come with German type approval (ABE). Fitting them is easy and only a question of minutes. The manual is included.The wind deflectors are available in pairs for the front doors.
Product number: NACLI003P0062-G
Weight: 1,5 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

€85.00*
Modular vehicle panel for Suzuki Jimny 2 type GJ / HJ, for rear side windows, incl. mounting
All packed up for your trip? Of Course! But where is it? For your adventure vehicle to stay totally organized in the future and nothing to get lost inside your 4x4, we now offer this modular rear window organizer for the Suzuki Jimny 2 (type GJ and HJ). It is build from black powder-coated aluminum. This way your Jimny stays agile and organized at the same time. The panel is compatible with all of our MOLLE-products so you can mix and match however you like. The possibilities are endless. Be it a number of MOLLE bags, a first-aid kit or any kind of other gadget you would like to attach, this organizer makes it possible. Material: Aluminum, black powder-coatedDelivery: 1 pc vehicle panel incl. mounting materialSuitable on both sides Special designs, suggestions and proposals for improvement will be implemented as far as possible. Mail or call is enough!
Product number: TACV-MFP-SUJI2
Weight: 1,0 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

€119.00*
Mudguard extensions TREKFINDER universal: 4 pieces, 23 mm wide, each 150 cm long, incl. TÜV®.
Wing flares TREKFINDER universal - 4 PIECES - 23 millimetres wide and 150 cm long - incl. TÜV® report inexpensive and flexible mudguard extensions in very good quality indestructible and therefore durable mudguard extensions made of black rubber ideal e.g. for track widening with wheels, spacer discs etc. - for prescribed registrations or off-road use the fender flares are glued in the wheel arch under the web edge of the bodywork the factory backing film is removed and the widening can be securely bonded to the clean surface/web edge for difficult off-road applications, additional fixing of the widening with screws is recommended the widener is 39 millimetres wide in total - of which approx. 16 millimetres are used for mounting and approx. 23 millimetres then protrude outwards to cover the tyres SCOPE OF DELIVERY: 4 TREKFINDER mudguard extensions, each 150 cm long, 1 TÜV® test report 1 type plate 1 piece fitting instructions 1 photo sheet ATTENTION - important installation instructions: the mounting surface must be smooth, rust-free, thoroughly cleaned and free of grease the outside temperature and the temperature of the components or mounting surface at the time of installation and for a period of 24 hours thereafter must be at least 20° Celsius after removing the 3M tape carrier film, the widener must be pressed evenly against the mounting surface for approx. 1 minute with high pressure adjust the ends of the widening to your taste with a sharp carpet knife to match the look of the vehicle Please allow the vehicle to stand for at least 24 hours after installation, preferably 48 hours the final strength of the bonding is only achieved after 48 hours Please do not wash the vehicle for at least 48 hours in some installation situations, especially if the installation instructions cannot be adhered to, additional fastening with e.g. self-tapping screws, body adhesive, primer is recommended
Product number: 9705-23600U
Weight: 2,5 kg
Parcel shipping

Delivery time 5-10 working days

€129.00*
Mudguard widening kit for Suzuki Jimny from TREKFINDER with 4 pieces each 150 cm long incl. TÜV®.
Mudguard widening kit for the Suzuki Jimny I FJ from TREKFINDER - 4 pieces, each 150 cm long / tyre tread cover 20 mm / incl. TÜV® / universal mounting Ideal e.g. with the 56 mm wheel spacer from TREKFINDER in combination with 215 tyres on 5.5J standard rims !!! Inexpensive and flexible wing flares in very good quality indestructible and therefore durable mudguard extensions made of black rubber the fender flares are glued to the existing wing flares of the Jimny and additionally fixed with screws (the screws are not included in the scope of delivery) the factory backing film is removed and the fender flares are then glued to the clean surface SCOPE OF DELIVERY: 4 TREKFINDER mudguard extensions, 150 cm each 1 TÜV® test report 1 type plate 1 piece assembly instructions 1 photo sheet ATTENTION - important installation instructions: the mounting surface must be smooth, rust-free, thoroughly cleaned and free of grease the outside temperature and the temperature of the components or mounting surface at the time of installation and for a period of 24 hours thereafter must be at least 20° Celsius after removing the 3M tape carrier film, the widener must be pressed evenly against the mounting surface for approx. 1 minute with high pressure adjust the ends of the widening to your taste with a sharp carpet knife to match the look of the vehicle Please allow the vehicle to stand for at least 24 hours after installation, preferably 48 hours the final strength of the bonding is only achieved after 48 hours Please do not wash the vehicle for at least 48 hours in some installation situations, especially if the installation instructions cannot be adhered to, additional fastening with e.g. self-tapping screws, body adhesive, primer is recommended  
Product number: 1-SUJI1SPVKFV
Weight: 2,5 kg
Parcel shipping

Delivery time 5-10 working days

€99.00*
Nakatanenga Air Vents - Suzuki Jimny 2 (GJ & HJ)
Good air circulation like with slightly opened windows and still no higher risk of rainwater or theft penetrating than with closed windows? And protection from various insects? That is possible: with our ventilation panels with mosquito net. For a subtle appearance, the aluminum sheets, which are supplied in pairs, are powder-coated in black. No clattering universal parts that "hold" somehow, but custom-made ventilation plates for the Suzuki Jimny 2. Ideal not only for campers and dog owners, but also to avoid the build-up of heat when parking in the blazing sun. In addition, the super simple assembly: crank down the window, insert the ventilation plate, crank the window up, done! Please note:At high temperatures, a dog should not belong in a parked car, even with sufficient fresh air!The ventilation plates must not be used while driving! Material: aluminumSuitable for: Suzuki Jimny 2 (GJ & HJ) <iframe width="560" height="315" src="https://www.youtube.com/embed/qWKDhVh_0n0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>  
Product number: LBLH-SUJI2
Weight: 2,0 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

€130.00*
Nakatanenga trunkliner for Suzuki Jimny II (model: GJ, year of manufacture: 2018)
Trunkliner for Suzuki Jimny II (model: GJ, year of manufacture: 2018) As one of the last real work animals under the SUV, the Jimny is pretty much abused. And in the interior, it's mainly down the back, on the loading area. Oiling chainsaw, dripping dog, muddy boots or bloody hunting track, our new tailor-made boot tub for the Jimny II is everything that licks, dust, dirty, hair or otherwise can not hold itself. The trunkliner is made of odorless plastic, extremely robust and extremely flexible. Anti-slip keeps dirt out even in off-road driving in the protective shell and the higher edge of dirt prevents leaking liquids spilling into the car interior. Normal residues can be removed with a damp cloth, for cleaning of coarse dirt simply remove the tub from the cart and spray it with the hose. As a perfect complement to the luggage compartment we recommend seat covers and floor mats for the Jimny II.
Product number: KOW-SUJI2
Weight: 1,0 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

€17.00*
Nakatanenga Upgrade rear door damper for Suzuki Jimny 2 GJ/HJ
Upgrade rear door damper for Suzuki Jimny 2 GJ/HJ Rear doors on off-road vehicles have to be heavyweight athletes, as they often carry spare wheels and other equipment. Especially when the vehicle is parked on uneven surfaces, opening tailgates – or keeping them open – can be a difficult and heavy task. For the Suzuki Jimny 2 (from model year 2018), we offer an easy-to-fit plug & play solution that does not require any modifications to the vehicle itself. The replacement damper for the rear door is calibrated to an opening angle of approximately 3. That means once you’ve pulled the handle and opened the door to that angle, the damper automatically and gently pushes the door fully open and keeps it in position – even when you’re parked at an angle on slopes or in off-road terrain. Another advantage of the heavy duty damper is the wider opening angle (slightly over 90°) when compared to the original part.
Product number: UP-HTD-SUJI2
Weight: 3,0 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

€99.00*
Rock slider for the Jimny GJ and HJ
The rock slider for the Jimny GJ and HJ Tight-fitting rock slider made of aluminum with steel holding structure.  To increase the rigidity of the slider panel, "dimple the" beads are pressed into the front.  Replaces the original plastic sill protection.  The steel holding structure is replaced by pressing in threaded rivets in the sill (attention, drilling out the existing holes from 8.5 mm to 9 mm necessary). On the underside, the retaining structure is held in position by clamping the sill rebate. The slider panel can be replaced separately if damaged, provided the substructure has not been damaged Sill fold protected. Our Rockslider is made of high-quality aluminum and black matt powder-coated. We opted for the lightweight design, so our Rockslider is a functional aluminum cab protection, therefore not suitable for a jack, but in medium-difficult terrain it is more than sufficient protection. The GJ Rockslider has received a general operating license (ABE). Each individual side skirts will be different after welding. Test gauges inserted to ensure a 100% fit. Scope of delivery:Rockslider left & rightGeneral operating license Facts: Weight complete set (driver & passenger side): 9.kg
Product number: HSJ2RSA01
Weight: 10,5 kg
Parcel shipping

Delivery time 5-10 working days

€599.00*
Rock Slider für Suzuki Jimny GJ Aluminium, 2 Stk
Side skirts with aluminum steps The robust side skirts protect your Jimny off-road. The steps have been folded so that you don't get caught anywhere. The side steps are mounted on the original attachment points. Material: aluminum Color: black powder-coated Size: 129x41x28 cm Weight: 7.80 kg  The aluminum slider is completely sufficient for light terrain. Scope of delivery:  Rock slider left & right mounting material 2x step-installation instructions TÜV certificate ... and with an indescribable look for free
Product number: HSJ2RSA02
Weight: 8,5 kg
Parcel shipping

Delivery time 15 working days

€599.00*