Skip to main content
Fast dispatch
Individual counselling
Rapid processing of enquiries
Technical advice: +49 9181 466 644
Questions about your order? +49 151 419 457 42
Unterfahrschutz

Aluminium-Unterbodenschutz für Geländewagen

Gerade abseits befestigter Straßen oder in schwerem Gelände bewahrt der passende Unterfahrschutz wichtige Bauteile Ihres Offroaders vor Verschmutzung und vor allem Beschädigung. Beim Überfahren von größeren Steinen oder Ästen kommt es nicht selten zu Schäden an Ölwanne, Getriebe, Achsdifferential oder Lenkstange, was ein Weiterfahren unmöglich macht und teure Reparaturen nach sich zieht. Neben Seitenschutz, Differentialschutz und Tankschutz hilft deshalb ein hochwertiger Schutz des Unterbodens derartigen Situationen vorzubeugen und bewahrt Sie vor so manchem teuren Schaden.

###

 

Alle unsere Unterfahrschutz-Rutschplatten werden aus hochwertigen, besonders robusten Materialien wie Aluminium oder massivem Stahl gefertigt. Unsere langjährigen Konstruktions- und Fertigungskompetenzen haben dazu beigetragen, dass unsere hauseigenen Unterfahrschutze durch exzellente Qualität und absolute Passgenauigkeit bestechen: 100% Made in Germany. Die von uns angebotenen Produkte halten bereits seit vielen Jahren den Praxisanforderungen begeisterter Offroad-Fahrer und gewerblichen Nutzern in aller Welt stand und überzeugen mit einer besonders langen Lebensdauer auch bei hartem Einsatz.

 

Unterfahrschutz für Defender und viele andere Offroader

In unserem Sortiment finden Sie Unterfahrschutze für viele Land Rover Modelle und weitere Geländewagen. Ein umfassender Schutz für Spurstange, Getriebe, Ölwanne und Querlenker erhöht die Lebenszeit Ihres Geländewagens und bewahrt Sie vor teuren Reparaturen und dem Liegenbleiben im Gelände oder fernab der Zivilisation.

▷ Underside protection, 8mm Alu, black powder coated, New Defender - available here!
Underside protection, 8mm aluminum, black powder-coated, for Land Rover New Defender from BJ 2020 No 4x4 with serious off-road ambitions can do without underside protection in the front and the engine area. Stones, debris, branches, steep slopes and much more can easily damage the oil pan, mechanical components, radiator, tubes or electrics in rough off-road conditions. Our Nakatanenga front undershields for the New Defender (MY 2020 and later) are superior to the original Land Rover part. They are virtually identical in size, shape and positioning, but here's the difference: our Nakatanenga guard is made from 8mm aluminum! Compared to the OEM part with its 5 mm, that's an increase of a whopping 60%! But that's not all: our front undershield is not only more robust and shock-resistant, it even beats the OEM accessory in price. More performance, less cost - that's how it should be. The front undershield is mounted to existing screwholes and is completely powder coated in black. Fastening materials are included. MADE IN GERMANY!
Product number: UFS-NEWDEF-PB
Weight: 10,0 kg
Freight forwarding
Delivery time: 3-6 working days**

€799.00*
Bullbars for Ford Ranger
Bullbars for Ford Ranger (2012 - 2016) Across rivers and ponds, through rock gardens and mud, obstacles lurk around every corner. In order for your vehicle to be prepared in the best possible way and to safeguard it from everything that might damage it, this bullbar now offers this protection and brings a whole new look to your 4x4. Colour: BlackMade in EU
Product number: R12-R1285-06-B
Weight: 9,0 kg
Freight forwarding

Delivery time 10-20 days

€369.00*
Bullbars for VW Amarok (2016 - ...)
Bullbar with sheet metal for VW Amarok from 2016 Even on the bumpiest road, your Amarok is always protected. This high-quality hanger is the ideal protection thanks to its customization and helps to avoid any unnecessary damage.  Existing mounting holes can be used. Color: BlackMade in EU Bullbar with EC type-approval in accordance with the provisions of Directive 78/2009 / EC.Approved for traffic in all EU member states.
Product number: AMAROK-R1670-04-B
Weight: 19,0 kg
Parcel shipping

Delivery time 15-20 days

€525.00*
Nakatanenga underride protection for Land Rover Defender, 10mm aluminium
Nakatanenga underride protection for Land Rover Defender, 10mm aluminium Underride protection, 10 mm aluminium, galvanically anodised and optionally black powder-coated, side parts 8 mm, steel, galvanised and black passivated, with two integrated heavy duty recovery eyes.The underride guard is attached to the original mounting points using the original vehicle bolts. All other installation material is included.Passivation is the spontaneous formation (aluminium, nickel, titanium...) or targeted creation of a protective layer on a metallic material, which prevents or greatly slows down the corrosion of the base material. Please note: The underride guard is ONLY suitable for left-hand drive vehicles!
Product number: UFSDEAL10B-ELM
Weight: 13,0 kg
Parcel shipping
Dieser Artikel ist in verschiedenen Ausführungen verfügbar.

From €449.00*
Tie Rod Guard Land Rover Defender, 4mm Steel Galvanized
Tie rod guard for Land Rover Defender 90/110/130, 4 mm zink-dipped steel, all model years. The tie rod guard / skid plate protects the tie rod which is vulnerable in serious off-road driving, thus maintining steering ablility and avoiding expensive repairs and breakdowns Can not be fitted together with our heavy-duty tie rod set TRHDDESET!
Product number: TRG-DE
Weight: 5,7 kg
Parcel shipping
Available from stock - delivery time 1-3 working days**

€78.00*
Transmission Guard, for Land Rover defender Td4, Aluminium, 6mm
Transmissionguard, Aluminium 6 mm, for Land Rover Defender TD4 90/110/130, from MY '07 Protects the transmission in rough terrain, to allow for the perfect day out on the trail without any failures or damage. Simultaneously the guard functions as a skid plate allowing you to gently slide over obstacles.
Product number: GBXG4AL6
Weight: 12,0 kg
Parcel shipping

Delivery time 20-25 days

€399.00*
Transmission Guard, for Land Rover defender Td4, galvanized steel, 4mm
Transmissionguard, galvanized steel 4 mm, for Land Rover Defender TD4 90/110/130 Protects the transmission in rough terrain, to allow for the perfect day out on the trail without any failures or damage. Simultaneously the guard functions as a skid plate allowing you to gently slide over obstacles.
Product number: GBXTD4ST4
Weight: 28,0 kg
Parcel shipping
Available from stock - delivery time 1-3 working days**

€349.00*
Transmission Guard, for Land Rover defender Td5, galvanized steel, 4mm
Transmissionguard, galvanized steel 4mm, for Land Rover Defender TD5 90/110/130 Protects the transmission in rough terrain, to allow for the perfect day out on the trail without any failures or damage. Simultaneously the guard functions as a skid plate allowing you to gently slide over obstacles.
Product number: GBXG5ST4
Weight: 28,0 kg
Parcel shipping

Delivery time 20-25 days

€344.00*
Underride protection for SUZUKI Jimny type FJ BJ 1998 to 2018
Underride protection for SUZUKI Jimny type FJ MY 1998 to 2018 transferbox by TREKFINDER made of 8mm aluminium Underride protection TREKFINDER Heavy Duty for Suzuki Jimny transferbox (fits all Jimny models type FJ year of construction 1998 to 2018 (NOT from 2018 type GJ)) - incl. plug and switch protection made of 8 millimetre aluminium - super stable and flat design.ATTENTION: in Jimny models, transfer case mountings of different heights are installed ex works, it may be that you have to underlay the underride protection on both sides with washers - this individual adjustment allows minimum distance to the VTG - this in turn means optimum ground clearance off-road and is a technical advantage!The underride protection is mounted at the original points - no drilling is required.
Product number: 1-SUJIUFS
Weight: 6,1 kg
Parcel shipping
voraussichtlich ab Ende November 2024 wieder lieferbar

€199.00*
Underride Protection Heavy Duty TREKFINDER for SUZUKI Jimny 2 Type GJ BJ from 2018 and Type HJ
Underride Protection for Suzuki Jimny II When you go Off-Road and you're pushing the limits of your vehicle, you should protect your cas as best you can. This Underride Protection, engineered to perfectly fit the second generation of Suzuki Jimny, now makes for a care free travel across all kinds of terrain. The 6 mm thick aluminium fits all engine sizes and all kinds of transmissions.  Additionally and for an even easier instalation, all the nuts and bolts are already included.
Product number: 1-SUJI2UFS1KHD
Weight: 10,0 kg
Parcel shipping

Delivery time 10-15 days

€309.00*
Underride protection kit TREKFINDER for SUZUKI Jimny 2 type GJ and HJ 5-piece
Underride protection kit TREKFINDER for SUZUKI Jimny 2 type GJ and HJ 5-piece suitable for all Jimny models of the type GJ built from the end of  2018, Typ HJ suitable for all engine and transmission types including all mounting parts attachment to original points of the vehicle super stable and flat heavy duty versions Delivery: underride protection linkage 5 mm anodised aluminum underrun protection axle tube / differential front axle 5 mm galvanized steel underride protection transfer case 8 mm aluminum underride protection exhaust gas control system 3 mm galvanized steel underrun protection axle tube / differential rear axle 5 mm galvanized steel
Product number: 1-SUJI2UFSKK
Weight: 30,0 kg
Parcel shipping

Delivery time 10-15 days

€1,219.00*
Underride protection TREKFINDER for SUZUKI Jimny 2 type GJ / HJ DISTRIBUTION TRANSMISSION from 8 mm aluminum
Underride protection TREKFINDER for SUZUKI Jimny 2 type GJ / HJ transfer case suitable for all Jimny models of the type GJ built from the end of  '2018 and Type HJ suitable for all engine and transmission types made of 8 millimeters of aluminum including all mounting parts attachment to original points of the vehicle super stable and flat heavy duty version
Product number: 1-SUJI2UFS3K
Weight: 8,0 kg
Parcel shipping

Delivery time 10-15 days

€295.00*
Underride protection TREKFINDER for SUZUKI Jimny 2 Type GJ BJ 2018 and Type HJ
Underride protection TREKFINDER for SUZUKI Jimny II type GJ and HJ REAR AXLE made of 5 mm steel yellow galvanized suitable for all Jimny models of the type GJ built from the end of '2018 suitable for all engine and transmission types suitable for all rear axle versions made of 5 millimeters of steel yellow galvanized including all mounting parts attachment to original points of the vehicle super stable and flat heavy duty version
Product number: 1-SUJI2UFS5K
Weight: 7,5 kg
Parcel shipping

Delivery time 10-15 days

€249.00*
Underride protection TREKFINDER for SUZUKI Jimny II type GJ / HJ
Underride protection TREKFINDER for SUZUKI Jimny II type GJ / HJ EXHAUST GAS CONTROL SYSTEM suitable for all Jimny models of the type GJ built from the end of  2018 and Type HJ suitable for all engine and transmission types from 3 millimeters of steel yellow galvanized including all mounting parts attachment to original points of the vehicle
Product number: 1-SUJI2UFS4K
Weight: 4,0 kg
Parcel shipping

Delivery time 10-15 days

€169.00*
Underride protection TREKFINDER for SUZUKI Jimny II type GJ FRONT AXLE made of 5 mm steel yellow galvanized
Underride protection TREKFINDER for SUZUKI Jimny II type GJ front axle suitable for all Jimny models of the type GJ built from the end of '2018 suitable for all engine and transmission types suitable for all Vorderachsausführungen made of 5 millimeters of steel yellow galvanized including all mounting parts attachment to original points of the vehicle super stable and flat heavy duty version
Product number: 1-SUJI2UFS2K
Weight: 7,5 kg
Parcel shipping

Delivery time 10-15 days

€249.00*
Underride protection, 3-piece, steel 4mm, with welded-in 4mm reinforcement, Land Rover Defender
Underride protection for Land Rover Defender Underride protection with two heavy duty recovery eyes for all Land Rover Defender, robust three-part construction, steel 4mm, with welded-in 4mm reinforcement in the impact area, optionally hot-dip galvanised or hot-dip galvanised and black powder-coated Underride protection suitable for all Land Rover Defender from 1983 to today    skid plate made of 4 mm thick steel, with welded-in 4 mm reinforcement in the impact area    galvanised or galvanised and black powder-coated as desired    Side parts made of 8 mm thick steel, galvanised (black)    with two robust heavy duty recovery eyes    The underride guard is attached to the original mounting points using the original vehicle bolts. The complete other installation material is included.Material info:Passivation is the spontaneous formation (aluminium, nickel, titanium...) or targeted creation of a protective layer on a metallic material, which prevents or very much slows down the corrosion of the base material.Attention: The shackles shown are not included in the delivery - but have a look at our product recommendations below!Please select the desired surface.
Product number: UFS-DE-ST4B-VZM
Weight: 17,5 kg
Parcel shipping
Dieser Artikel ist in verschiedenen Ausführungen verfügbar.

From €209.00*
Underride protection, 6mm aluminium, high-strength alloy, ALL Land Rover Defender
Underride protection, 6mm aluminium, high-strength alloy, ALL Land Rover Defender Underride protection suitable for all Land Rover Defender from 1983 until today.    Skid plate 6 mm aluminium, high-strength alloy, weatherproof, galvanised and additionally black powder-coated on request.    Side parts 5 mm steel, electrogalvanised and black passivated (CrVI-free), optionally additionally black powder-coated    Integrated recovery eyes (22.5 mm diameter)    The underride guard is attached to the original mounting points using the vehicle's original bolts. All other installation material is included.Passivation is the spontaneous formation (aluminium, nickel, titanium...) or targeted creation of a protective layer on a metallic material, which prevents or greatly slows down the corrosion of the base material.
Product number: UFS-D-ALC-ELM
Weight: 7,8 kg
Parcel shipping
Dieser Artikel ist in verschiedenen Ausführungen verfügbar.

From €259.00*
Winch-Kit for Suzuki Jimny II (GJ und HJ)
Winch kit for Suzuki Jimny 2 Type GJ und HJ A winch kit provides an unobtrusive assembly for winches. Advantages: visually unobtrusive lower risk of theft and vandalism better protected against environmental conditions only minor adaptation work on the bumper necessary, no total conversion of the front
Product number: SUJI2-R18-PW
Weight: 13,0 kg
Parcel shipping

Delivery time 15-20 days

€419.00*