A-pillar grab handle The easy-to-fit, stylish A-pillar grab handle makes it easier to get in and out of Defender. The handles are made from anodised aluminium. Available in black or silver Scope of delivery: 1 piece grab rail, fixing material.

Land Rover Defender - Multifunctional Extension The multifunctional conversion for the Defender 110 TD4 offers an additional loading level with minimal conversion effort. This gives you additional storage space and, with the second row of seats folded down, a flat loading area approx. 180 cm long. The folding wooden cover provides privacy and also serves as a luggage compartment cover. The aluminium boxes are manufactured in skeleton construction and are therefore particularly light and space-saving. They are bolted to the wheel housing and can be fitted in just a few steps. Especially for the multifunctional extension, we now also have a folding mattress set consisting of a total of four cold foam mattresses with a nettle bottom cover. The complete load compartment conversion consists of:     Aluminium box left, black powder-coated incl. wooden lid     Aluminium box right, black powder-coated incl. wooden lid     Foldable wooden shelf This article is bulky goods. The shipping weight differs from the actual weight of the goods. Weight of goods (total): 25,7 kg Alternatively, we also offer the multifunctional extension as a sleeping extension (with two high-quality mattresses). Note: 3 holes must be drilled per side to attach the aluminium boxes.

Durable belt staple for all tension belts up to 35 wide, set with 10 pieces. Ideal for fitting our cargo net. Maximum belt width: 35 mm Material: steel, galvanized

The bulkhead is pretty much the most complex body part in a Landy – and one of the most vulnerable components, too. For one, it’s sporting many edges, corners, folds, curves and rivet connections and requires a considerable number of screw holes: to the frame, to the connections in the engine bay and to the windshield. Add to that a whole bunch of openings for steering, pedals, air and electrics and you see the problem. All this structural complexity combined with its positioning exposes the bulkhead to water splashing up from below or trickling down from above. Dirt and chemicals collect in the nooks and crannies and trap moisture almost permanently. On the inside of the cabin condensation or leaks can produce the same effect behind the dashboard, panels or floor mats, thereby creating constant moisture exposure from both sides. No wonder, that the bulkhead is one of those components that suffer most from visible or hidden corrosion. Over time, it can even affect the frame. In case you are tired of piecemeal patch jobs on your Td5’s or 300Tdi’s rusty bulkheads or you are contemplating a proper restauration anyway, we can offer you a complete, primer-coated high-quality bulkhead, made in the EU.Material: Stainless steel

Conversion Kit for Bulkhead removal in Defender 90STs and 110HTs. Allowing you to tilt the seats further, thanks to the larger cut-out. Up to MY 2007

Versatile butterfly closure made of stainless steel. It is a sturdy lock with a snap and turn mechanism.This rotary closure is ideally suited for e.g. for DIY projects, transport boxes and much more. The hinged wing is flat and easy to operate. Due to the special construction, the boxes are well protected against accidental opening. Available in a set of 2, 5 or 10 pieces Basic information: not spring loaded stainless steel lockable without shell

Cargo net incl. fixing material, Suzuki Jimny II The smaller the car, the bigger the challenge to make the best use of available space inside. Our cargo mesh for the Suzuki Jimny II (from MY2018) will generate a lot of storage room in a place that’s rarely used: under the roof in the cargo bay.To attach the 93 x 60 cm netting to the roof trim, all you need to do is mount two aluminum frame elements in the front and the back. They are the same color as the mesh for a seamless look. The elastic cargo mesh can then be attached to the frame and the interior grab handles with 12 adjustable straps. To make it easier for you to fill the mesh space, there are also two click buckles in the front for easy access.Light and flat pieces of equipment, sleeping bags, textiles and the like will find the perfect storage space inside the mesh, even in a fully loaded Jimny.If you do not have handles on the headlining, 2 ring nuts are supplied to attach the net. Additionally, you can thread an elastic string in a zigzag shape on the underside of the netting for all those lighter items you want quick access to: light blankets, towels, swimming or sports gear etc.The cargo mesh comes in the colors black, gray and coyote. Please note: When ordering, please be sure to state in which model (GJ or HJ) you would like to install the Cargo Net, and also whether you have an interior light (Comfort Plus equipment) in the GJ model. Pictures may vary.

Cargo-Netz für den klassischen Defender Die am wenigsten genutzte Fläche im Innenraum eines Autos ist der Dachhimmel. Dabei lassen sich hier vor allem leichte und flache Sachen wunderbar wegpacken – wenn man denn eines unserer genial praktischen Cargo-Netze installiert hat. Das 102 x 76 cm große Netz für den alten Defender (bis BJ 2016) kann je nach Fahrzeuggröße oder Konfiguration variabel aufgespannt werden. Das heißt beim 110er zum Beispiel ganz hinten über dem Laderaum bzw. der dritten Sitzreihe oder eben auch mittig. Da das Netz grundsätzlich von vorne und von hinten zugängig ist, hat man dann nämlich bei Hardtops, Camper-Umbauten und anderen Zweisitzern sogar vom Fahrer- bzw. Beifahrerplatz schnellen Zugriff auf diese praktische Stauraumerweiterung. Das Einspannen des flexiblen Cargo-Mesh im Dachhimmel ist mit 14 Gurten und Gurtkrampen denkbar einfach. Die mitgelieferten Spreiznieten ermöglichen darüber hinaus die angesprochene individuelle Positionierung der Halterung. Unter dem Netz kann übrigens noch zickzack-förmig ein 10,5 m langes Gummiband eingezogen werden. Das ergibt dann eine zusätzliche Pack-Ebene, in der leichte Gegenstände, Decken, Jacken und vieles mehr noch schneller griffbereit bleiben. Das Cargo-Netz für den klassischen Defender gibt es in den Farben Schwarz, Grau und Coyote. Lieferumfang:   1x Cargonetz14x Gurtkrampen28x Befestigungsnieten Info: Es handelt sich um spezielle Nieten. Diese pilzen besonders weit auf und sind dadurch besonders gut haltbar in Kunststoffverkleidungen.  Unser Cargo Netz Expedition für den Land Rover Defender finden Sie hier. 

Practical nylon cargo net, can be fastened almost anywhere with tensioning buckles, size approx.: 150 x 100 cm. Made exclusively for us in Germany. Material thickness: 3mm, mesh size: 45 x 45 mm, load capacity approx.: 400 kg, delivery colour: black. 14 lashing points, 150 cm long, with practical and stable ITW NEXUS quality strap buckles for maximum hold and at the same time quick and easy fixing. Knotless net and chained net end ensure durability even with heavy loads. Material: 100% nylon Illustration similar Optional: set of 10 belt staples for mounting the net. The net is also available in other sizes on request.

Cargon net Practical nylon cargo net, can be fastened almost anywhere with tensioning buckles, size approx.: 110 x 90 cm. Made exclusively for us in Germany. Material thickness: 3 mm, mesh size: 45 x 45 mm, load capacity approx.: 400 kg, delivery colour: black.14 lashing points, 90 cm long, with practical and stable ITW NEXUS quality strap buckles for maximum hold and at the same time quick and easy fixing. Knotless net and chained net end ensure durability even with heavy loads. Material: 100% nylon Optional: Set of 10 belt staples for mounting the net.The net is also available in other sizes on request.

Clinometer/gradiometer for angles from 0-45° (scale in 5° steps), for cockpit mouting. Shows vehicle angle and is ideal of off-road use or to level the vehicle, e.g. when camping in a roof top tent. Fitting with high-quality adhesive tape. Made of high-grade plastic and liquid filled, ideal for off-road use, boats, camper vans, trucks. Dimensions: 89 mm x 41 mmWeight: ca. 28 grammes Clinometer / gradiometer Lev-o-gage 201F

This box contains the most popular clips, plastic rivets, mating bushings and mounting hardware for Land Rover vehicles. The set contains the following 280 parts: 35 pieces rivet15 pieces trim fastener15 pieces scrivet15 pieces scrivet15 pieces scrivet25 pieces finisher clip20 pieces stud door casing20 pieces stud door casing - blue20 pieces fastener60 pieces snapsac25 pieces door casing stud15 pieces fir tree roof insulation retainer

Switchboard PROFI 2 for Cubbybox New control panel Cubbybox Land Rover Defender made of high quality aluminium with 3 Profi switches with green LED lighting, circuit breaker and voltmeter for independent testing of 2 different batteries, cigarette lighter with socket, rubber cover and fuse, 190 x 132 mm.

Bulkhead conversion kit Removing the full height bulkhead from the L663 Defender 90 and 110 'hardtop' is a popular modification, but when the factory bulkhead is removed from the vehicle, the area behind the seats looks raw and unfinished.The Bulkhead Delete Kit cleans up the front edge of the cargo area and the trim area behind the seats to create a sleek OEM interior when the bulkhead has been removed from an L663 Defender Hardtop.The partition removal kit's molded, raised lip creates a raised mini-partition that prevents objects in the rear of the vehicle from falling into the cavity behind the front seats and/or damaging the seat backs.With the partition removed, the interior of your Defender Hardtop suddenly feels lighter and airier. Items in the rear of the vehicle are easier to reach and you can adjust the seats over a wider range.The Bulkhead Delete Kit can be installed in around 30 minutes and it has been designed to utilize the existing mounting points, meaning no modifications need to be made to the interior of your Defender. This design feature also means that the installation is fully reversible at a later date. The installation kit includes 3D printed blanking plugs to cover the empty M6 fixing holes where the bulkhead brackets were attached to the B-pillar.Disclaimer: The L663 Partition Removal Kit is not intended to provide structural strength or any form of personal protection to occupants from a shifting load. It is the owner's responsibility to secure all loose items in the rear of the vehicle. Note: We are already developing a perfectly matching net as a partition wall.

Corner protector for Defender seat box The edge of the Defender seat box is susceptible to damage and sometimes looks quite pitted and unsightly after a while. With these elegant corner protectors, you can spruce up the seat box and protect it at the same time!Made of 3 mm black metal and CNC-milled to the highest precision. With the help of a cordless screwdriver and the included fastener, the corner protectors are attached in less than 5 minutes! The kit contains a pair of corner protectors and 12 pcs. 8x19 mm steel screws. The corner protectors also fit a Series 2 and 3, but require a matching hole to allow the seat rail to be attached.Scope of delivery: One pair of corner protectors incl. fixing material. Illustrations may differ.

Heater Deflector for Land Rover Defender Td4 The heater deflector distributes the flow of air from the footwell heater outlets in your Land Rover Defender 90/110/130 Tdci 2.4 and 2.2 (MY 2007-2015) evenly into the footwell rather than directly at your lower legs, thus creating a more comfortable driving environment. All you need is a 4.5 mm drill, all fixings are included. Can be fitted in 5 minutes. Colour: black

The set contains different fixings to attach the interior door trim on Land Rover Defender vehicles. One set contains enough fixings for one side door.

LED lights also offer advantages for interior lighting, like high light output, minimum power consumption, maximum vibration resistance and life expectancy. This is why we have asked a renowned automotive component supplier to produce an interior LED light for the Land Rover Defender for us. Our Nakatanenga LED Interior Light allows easy "plug & play" replacement of the standard interior light (front and back) of your Land Rover Defender. Lamps are sold separately, if you want to replace both lights please order this item twice. The cover and bulb of the existing light (AMR3155) are removed, the adaptor, LED circuit board and the new cover with switch are fitted - that's it, all tool-free and taking no more than 5 minutes! All previous functions of the interior light (on/off/door on) are kept, additionally you can switch to red light, which increases visibility at night. The last colour setting is stored. As some dislike the typical cold-white light of many LED lights, we can also supply a version with warm-white (slightly 'yellower') light output. Unlike many other aftermarket lights, our LED interior light maintains the looks of the original. Can be used both for the front and rear interior roof light. Technical details: light colour (warm-white): 4.500 kelvinlight colour (cold-white): 6.500 kelvinwavelength (red light): 625 nmvoltage: 12 V (not suitable for 24 volts vehicles!)voltage range: 11-18 Vpower drain (at 12.8 V): 0.15 A (white light)power drain (at 12.8 V): 0.05 A (red light) Fits for all Defenders from 1985 to 2016 ATTENTION! The interior light can only be used in combination with the original Land Rover base. Please choose our universal bundle if you want to fit elsewhere or to a different make of vehicle.

Versatile lever lock made of stainless steel.This closure is ideally suited e.g. for DIY projects, transport boxes and much more. Due to the quick and easy assembly, this closure is the absolute all-rounder. The robust lever lock is equipped with lock and matching key. Available in a set of 2, 5 or 10 pieces Basic information: spring-loaded stainless steel lockable

Delivery incl. 4 Velcro points for attachment to the Velcro strips of the sun visor organiser The mirror is available as a standard model or as a "survival model" with integrated heliograph for reflecting sunlight as an emergency signal. Dimensions LxW: 10x7 cm

MOLLE System Bag Set Are you looking for a packing option that will finally allow you to organise your belongings? With the new Molle bag set you are prepared for any eventuality. You can attach the Molle bags to various carriers, organisers, panels or backpacks with the Molle system - examples are our Molle carriers for car seats and our Tailgate organisers for Defender, Mercedes G, Jeep Wrangler, Suzuki Jimny or our universally usable Tailgate organisers. The innovative MOLLE system (short for MOdular Lightweight Load-carrying Equipment) makes it easy to attach the bags and ensures that they are held firmly in place.What is Molle? Information can be found in the downloads.The following MOLLE pouches are included:     1 multi-purpose pouch     1 multi-purpose pouch, open     1 multi-purpose pouch, large     1 universal bag, large     1 first aid bag (optional - please select above at "Variant") Material: 100% nylonDimensions WxH:     Multi-purpose bag, large: approx. 24x15 cm     Unversaltasche large: approx. 21x22 cm     multi-purpose bag open: approx. 12x19 cm     multi-purpose bag: approx. 20x13 cm Please note: the pictured tailgate organiser (molle panel) is NOT included in the set!<iframe width="560" height="315" src="https://www.youtube.com/embed/K3uIwrFH1Yk" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

HiLift Wagenheber-Halterung für Defender 110 Station Wagon Ob Offroad oder im Normalbetrieb, ein guter Ratschen-Wagenheber wie der Hi-Lift ist in vielen Situationen unschlagbar, nicht nur bei der Bergung, sondern als mobile Ersatzwinde, als Spreizwerkzeug und vieles mehr. Der einzige Nachteil: Hi-Lift, JackAll und andere baugleiche Heber brauchen mit der nicht zerlegbaren Länge von meist 48“/122 cm auch entsprechend viel Platz und passen definitiv nicht unter den Fahrersitz wie die kleinen OEM Standard-Wagenheber. Aber zum Glück gibt es im Defender 110 Station Wagon ja auch noch andere Sitze. So bietet der Hohlraum unter der Rücksitzbank den perfekten Platz für Hi-Lift, Hi-Lift X-treme, JackAll & Co der Länge 48“/122 cm. Damit ist der Jack im Fall der Fälle schnell erreichbar und stört nicht im Geringsten, wenn man ihn nicht braucht. Einfach die Rückbank umklappen und schon hat man leichten Zugang zum Hi-Lift. Darüber hinaus bietet das Wageninnere natürlich auch den besten Schutz vor Rost und Schmutz. Und damit der Wagenheber beim Fahren nicht verrutscht, schlägt oder klappert, haben wir eine echte Nakatanenga-Lösung parat: Eine hochwertige Edelstahlschiene, die einfach auf die Sitzbanklager geschraubt wird und den Wagenheber zwischen zwei griffigen Rändelmuttern und vier Gummi-Pads fest und klapperfrei fixiert. Jeder Stahlschiene legen wir übrigens noch eine gelbe Transportsicherung bei, damit auch das Hebelrohr sicher und geräuschlos anliegt. Auch wenn die Halterung passgenau für die Defender 110 Rückbank konstruiert ist, lässt sie sich natürlich auch an jeder anderen geeigneten Fläche montieren, im Defender, in anderen 4x4s, innen auf der Ladefläche oder außen auf dem Roof Rack zum Beispiel.  Lieferung ohne Hi-Lift Passend auch für JackAll 122 cm und andere baugleiche Derivatprodukte.

Nakatanenga LED Innenraumleuchte Hunter, Universal (nicht Defender), warmweiß Auf Grund der Anfragen, wie unsere Nakatanenga Innenraumleuchte für den Land Rover Defender auch in anderen Fahrzeugen verwendet werden kann, haben wir dieses Set zusammengestellt. Es enthält alles, um die Leuchte im PKW, 4x4, Wohnmobil etc. zu verwenden, welches nicht die Land Rover Original-Innenraumleuchte aufweißt. Technische Daten: Lichtfarbe (warmweiß): 4.500 KelvinWellenlänge (Rotlicht): 625 nmBordspannung: 12 V (nicht für 24 V Fahrzeuge geeignet!)Spannungsbereich: 11-18 VLeistungsaufnahme (bei 12,8 V): 0,15 A (weißes Licht)Leistungsaufnahme (bei 12,8 V): 0,05 A (rotes Licht)

Nakatanenga Overhead Storage System Defender Where to put important small items when the storage space in the vehicle cockpit is tight? It's simple! Into the pockets of our Overhead Storage System. Even items that are only needed in an emergency are then within easy reach.In addition to a space-saving bag, the innovative Overhead Storage System contains a base plate that is attached between the sun visor and the car roof. In various bundles, you can then decide whether the plate with radio holder is intended for the driver's or passenger's side. In the case of the base plate with radio holder, a suitable holder for the CB handset is also included in the scope of delivery. This holder uses the three attachment points of the centre mirror.The bag and plate are available in black and grey. As an alternative to the Albrecht radio, other radios with similar dimensions (104 x 100 x 25 mm) can also be attached. No additional holes are required for the base plates, as the existing holes in the sun visor are used for mounting.The bags are manufactured according to US military standards (MIL-SPEC) and our specifications by Delta Bags in Germany. The bag for the plate with radio holder is smaller due to the holder. Can be ordered either individually or in sets.Technical dimensions:Bag standard: 480x150x20 mmBag radio version: 375x150x20 mm