Connection kit for all compressors. The kit consists of 5 parts - 1 adapter + 4 pcs nozzle versions. Use a compressor or tyre pump to reach the recommended PSI within minutes. The adapter with its variable nozzle guides is also suitable for most paddle boards (SUP), canoes, rubber boats, swim rings,inflatable beds,kayaks etc.

Bicycle valve adapter for Sclaverand and Dunlop valves With this valve adapter, you can inflate your bicycle tires with a Sclaverand valve or Dunlop valve. The adapter is compatible with our VIAIR compressors. Scope of delivery: 1 pc. Valve adapter

The compressed air tank is used wherever a large quantity of compressed air is needed quickly and must therefore be stored. For example, for compressed air tools, for filling tyres on the road or for tyre inflation systems. Air tank, 8 litres capacity, 170x420 mm (WxL), the total height is approx. 220 mm 4 connections 1/4" and 1 connection 1/8"

HD vibration isolator set for all VIAR compressors with base plate When mounting VIAIR compressors with a base plate in your vehicle, we recommend using our heavy duty vibration dampers, as the rubbers on the original ones tend to wear out relatively quickly. The rubber absorbers reduce the compressor’s vibrations and guarantee significantly quieter operation.Fastening material is included.  

88P-SXS Portable Compressor For up to 33″ TiresNAVIA-00082– 120 PSI / 1.97 CFM VIAIR 88P Side by Side Edition comes with 2-PIN SAE connectors for easy connection and a modified bag that allows a secure mounting solution on your Side by Side or UTV. This compressor is capable of inflating up to 33-inch tires easily by simply connecting the 2-Pin SAE Connector to your battery. Comes with the permanent 2-Pin SAE Connector and 2-Pin SAE to battery clamp for convenience. Connect to a tire valve stem and turn the unit on. Tire pressure can easily be checked using the gauge incorporated into the top of the unit. SPECIFICATIONS: 12-Volt Permanent Magnetic Motor Duty Cycle: 25 min. @ 30 PSI Max. Working Pressure: 120 PSI Max. Amp Draw: 20-Amps Ingress Protection Rating: IP53 Max. Ambient Temp: +158°F Min. Ambient Temp: -4°F Dimensions: 9.8″L x 3.2″W x 5.6″H Net Weight: 5.30 lbs. Power Cord Length: 10 ft. Air Hose Length: 16 ft. Power Cord: 10 ft. / Air Hose: 16 ft. FEATURES: 120 PSI Pressure Gauge LED Work Light / Power Indicator Dual Battery Clamps w/2-Pin SAE Connector Permanent 2-Pin SAE Connector for battery with 20-amp Inline Fuse Holder 2-Pin SAE Connector with 20-amp Inline Fuse Holder Solid Brass Twist-on Tire Chuck Heavy Duty Carry Bag with Straps and Hardware for Mounting 3 pc. Inflation Tips Kit* Presta Valve Adaptor * Mounted above Rear Compressor Feet FILL RATES:31″ X 10.5″ 0 to 30 PSI 3 min. 30 sec. (± 10 sec.)15 to 30 PSI 2 min. 10 sec. (± 05 sec.)33″ X 12.5″ 0 to 30 PSI 5 min. 15 sec. (± 15 sec.)15 to 40 PSI 3 min. 00 sec. (± 05 sec.) Please Note: Always check your vehicle’s power port rating for maximum amperage before ordering. The 88P does not work with Presta bicycle valves, unless used with a Presta Valve Adapter. The 88P does not work with the VIAIR Winterization Kit.

Compressor set from VIAIR model 450P automatic with a delivery rate of 51 litres/minute and 12 volt operating voltage in a transportable version with "comfort operation" Technical data:- Suitable for tyre sizes max. 42".- It has an automatic shut-off when no air is needed. A simple pressure on the filling gun is sufficient to switch the compressor on again.- Delivery volume: at 0 bar 51 l/min, at 3 bar 34 l/min, at 5 bar 26 l/min and at 7 bar 21 litres per minute- max. air pressure: 10 bar- max. voltage: 13.8 volts- max. current consumption: 23 amps- max. ambient temperature for compressor operation: 70° Celsius- min. ambient temperature for compressor operation: -40° Celsius- Max. possible operating time e.g. at 22°C ambient temperature: 60 minutes at 7 bar, after which the compressor should pause for approx. 40 minutes, or 40 minutes at 10 bar, after which the compressor should pause for approx. 60 minutes.- Dimension: length 28cm / width 15cm / height 19cm- Weight: 5,9 Kg- Protection class: IP54Scope of delivery:- 9.5 metre air hose, spiral-shaped- 2.5 metre battery cable with battery terminals- Tyre inflator incl. pressure gauge- Aluminium stand or plate- Connection from stand to compressor by vibration-reducing silent blocks- Replaceable air filter- Battery cable with integrated fuse holder incl. 30 amp fuse- three additional valve adapters- a high-quality carrying bagAs a pioneer and market leader in the field of automotive compressors, VIAIR has set the highest quality standards that apply to all VIAIR compressor models and series. Here is a small excerpt of the most important features: - stainless steel valves guarantee long-lasting and optimum shut-off times - generously designed cooling fins on cylinders optimised for design ensure maximum air dissipation and longer service life - anodised cylinder running surfaces increase protection against abrasion - the piston motor with PTFE piston rings ensures the lowest friction and thus optimum smooth running and service life Features - the motors are protected against splash water and thus maximally resistant to corrosion - an integrated, automatic overheating protection protects the longevity of the compressors - CE marking.

An air pressure tank with 2.5L capacity, but only 77 mm in diameter, for all the difficult mounting spots. Stackable and completely manufactured from stainless steel, this tank is pressure checked and available by itself and as a bundle. When you're out on an adventure there is never a gasstation when you need one, especially when you desperately need petrol or air. But since you won't get around airing down on rough trails or in the desert sand, you will need a compressor either way. A compressor is certainly the easyest way to handle this frequent change in tirepressure, depending on the terrain, but a compressor always needs an air pressure tank, which is always either too small or when appropriate too big to be mounted anywhere efficiently. This problem can now be solved by this tank, because with a diameter of only 77 mm this tank can be squeezed in various different spots all around the car. Thanks to this the stackability of the tank allows you to easyly reach a capacity that enables the use of air pressure tools. While welding the tank it's impinged with forming gas to make the tank completely corrosion free and the pressure test guatantees incredible longevity. As a source for the pressurized air we recomend one of the highly sought after VIAIR compressors. Beware: none of the necessary hoses are come with the tank since the hose-lenght varies depending on the desired mounting point. Dimensions:Length: about 63 cmTube outside diameter: 76 mmHeight incl base feet: 88 mm

Whether road trip or expedition, adventure or everyday life: Punctures are annoying but in contrast to mechanical damage quickly and safely get a grip if the equipment is right. This applies to everyone and every woman, even if there is no help in the vicinity, so for example. in the expanses of Lapland, the Sahara or in one of the official 5000 (!) radio holes of Germany. At the heart of our worry-free off-road and off-road packages are four VIAIR portable compressors. This goes from the smaller compacts for occasional and emergency situations, such as the lighter-powered 75P or the 88P with battery connection up to the powerful models 400P or 400P-A with automatic shutdown for regular use in off-loading. By the way, here is a quick overview of our VIAIR range. (To the chart) For road use, the compressors can be bundled with an emergency repair kit. Valve damage can also be easily remedied here. For our off-road bundles, a Tire Deflator set is added to the compressor and repair kit, ie drain valves for pressure regulation away from the asphalt. After setting the desired pressure, the deflators are simply screwed onto the valves and then perform their duties automatically and simultaneously on all four tires. Ingeniously simple, just awesome. Legal notice According to the guideline for the repair of pneumatic tires VkBl.2001 (as an extension of §36 StVZO), a permanent repair for tires in public traffic may only be carried out by qualified specialist companies and in compliance with the manufacturer's specifications. The use of tires that have been repaired with the aid of breakdown sets is only permitted until the next possible visit to a specialist workshop.

Replacement - filter elements for Viair compressors. Foam filter elements with filter fleece for air filters of Viair compressors.- for metal housing (3/8" connection, disc shape, content 3 pieces). Ideal as replacement for frequent use in dusty areas

Spare wheel air pressure regulator with matching bag Function stacking is when you try to get by with fewer objects because you assign several functions to them. This is particularly important when you have to take space and weight into account when travelling or on expeditions. A spare wheel, for example, is usually just a spare wheel, but with our spare wheel air pressure regulator, the fifth wheel on the vehicle can also become a practical compressed air reservoir. If you inflate your spare tyre to the permitted maximum, you usually have enough pressure available to adjust the inflation of the tyres mounted on the axle or on the mountain bike or to operate compressed air devices such as our Showertube, for example. As the name suggests, our spare tyre pressure regulator basically functions simply as an adjustable equalising valve.The desired pressure is simply preset on the integrated regulator and the two hoses are attached to the "pressure receiver" and then to the spare wheel (compressed air reservoir). The pressure is then exchanged automatically. The spare wheel pump also has brackets for permanent installation and a robust and easy-to-clean nylon PU-coated bag for storage in the car.    

6 ft. portable VIAIR compression air hose extension hose suitable for VIAIR compressors: 70P, 77P, 85P, 87P and 88P.  Features: Kupplung: 8V1 (M) x 8V1 (F) Twist-On Tire Chuck

300P SXS - Portable Compressor P/N 30032 – 150 PSI / 2.30 CFM VIAIR 300P Side by Side Edition comes with 2-PIN SAE connectors for easy connection and a modified bag that allows a secure mounting solution on your Side by Side or UTV. This compressor is capable of inflating up to 33-inch tires easily by simply connecting the 2-Pin SAE Connector to your battery. Comes with the permanent 2-Pin SAE Connector and 2-Pin SAE to battery clamp for convenience. Tire pressure can be checked using the 5-in-1 Inflator/Deflator inline pressure gauge. Now includes: Presta Valve Adapter! SPECIFICATIONS 12-Volt Permanent Magnetic Motor Duty Cycle: 33% @ 100 PSI Max. Working Pressure: 120 PSI Max. Amp Draw: 20-Amps Ingress Protection Rating: IP54 Dimensions: 9″L x 4.9″W x 7.5″H Net Weight: 8.70 lbs. Power Cord Length: 8 ft. Air Hose Length: 25 ft. FEATURES Thermal Overload Protector 5-in-1 Inflator/Deflator Air Hose with Inline 60 PSI Gauge Aluminum Sand Tray with Vibration Isolators Deluxe Dual Compartment Carry Bag 40-amp Inline Fuse Holder Dual Battery Clamps 3 pc. Inflation Tips Kit Presta Valve Adaptor FILL RATES31″ X 10.5″ 0 to 30 PSI 3 min. 25 sec. (± 10 sec.)15 to 30 PSI 2 min. 00 sec. (± 05 sec.)33″ X 12.5″0 to 30 PSI 5 min. 00 sec. (± 10 sec.)15 to 30 PSI 2 min. 45 sec.(± 05 sec.) Please Note: The air hose supplied with this kit may become brittle from prolonged exposure to UV/sunlight. – Stow when not in use. Never allow the hose to come into contact with the head of the compressor during use (melting hazard). The use of the included air hose is not recommended in sub zero or freezing conditions. The 300P does not work with Presta bicycle valves, unless used with a Presta Valve Adapter. The 300P does not work with the VIAIR Winterization Kit.

Features: 0 - 200 PSI / 0 - 13,8 bar Close-Ended 1/4″ Quick Connect Coupler & Stud Deluxe Carry Bag Please note:The article does NOT fit the 440P compressor (since it has a 3/8 "connection).

VIAIR 330C-HG 200 PSI (13.8 bar), 12V CE compressor Specifications/ technical data: 12-volt Permanent magnet motor Duty cycle: 100% @ 100 PSI ( 6.9 bar ) Duty cycle: 50% @ 200 PSI ( 13.8 bar ) Max. Working pressure: 200 PSI Max. Air tank size: 5.0 gallons (approx. 19L ) Max. 12V power consumption: 14 amps Protection class: IP67 Max. Ambient temperature: +158°F (70°C) Min. ambient temperature: -40°F (4°C) Dimensions: 230 mm L x 101 mm W x 171 mm H Net weight: 3.8kg Hyper Grade (HG) compressors are specifically designed for filling air receivers and feature a head assembly with an innovative patented head design for better heat dissipation. All HG compressors are CE certified and have excellent sealing properties against the elements. In addition, all HG compressors are equipped with a separate stainless steel braided PTFE lined supply hose and check valve assembly.  Features: Thermal overload protection Vibration isolators Mounting hardware Heavy duty 1/4″ NPT check valve Stainless steel braided PTFE coated guide hose Air line for remote mounted air cleaner Remote mounted air filter assembly (2) Replacement air filter elements Assembly instructions Adapters with variable nozzle guides can be found here in our shop. The adapters are compatible with our VIAIR compressors. Application noteFor further application information, please refer to the product data sheet

Compressor set from VIAIR model 400P with a delivery rate of 65 litres/minute and 24 volt operating voltage in a portable version. As a pioneer and market leader in the field of automotive compressors, VIAIR has set the highest quality standards that apply to all VIAIR compressor models and series. Here is a small excerpt of the most important features: stainless steel valves guarantee long-lasting and optimum shut-off times generously designed cooling fins on cylinders optimised for design ensure maximum air dissipation and longer service life anodised cylinder running surfaces increase protection against abrasion the piston motor with PTFE piston rings ensures the lowest friction and thus optimum smooth running and service life characteristics the motors are protected against splash water and thus maximally resistant to corrosion an integrated, automatic overheating protection protects the longevity of the compressors CE marking.  The VIAIR compressor kit model 400P has the following scope of delivery:  7.5 metre spiral air hose  2.5 metre battery cable with battery terminals  Tyre inflator incl. pressure gauge  Aluminium stand or plate  Connection from stand to compressor by vibration-reducing silent blocks  Replaceable air filter  Battery cable with integrated fuse holder incl. 40 amp fuse  three additional valve adapters  a high quality carrying bag  The VIAIR Compressor Kit Model 400P has the following technical features: suitable for tyre sizes max. 35x12.50R15  delivery volume: at 0 bar 65 l/min, at 3 bar 44 l/min, at 5 bar 33 l/min and at 7 bar 22 litres per minute  max. air pressure: 10 Bar  max. voltage: 24Volt max. current consumption: 15 amps   max. ambient temperature for compressor operation: 70° Celsius  min. ambient temperature for compressor operation: -40° Celsius  max. possible operating time, e.g. at 22°C ambient temperature: 20 minutes at 7 bar, after which the compressor should be paused for approx. 40 minutes. with on/off switch  Dimension: length 28 cm / width 15 cm / height 19 cm  Weight: 4,8 Kg  Protection class: IP54 Example filling times for the VIAIR Compressor Kit Model 400P: Tyre size 31 x 10.50 R15: - 0 to 2 bar - 3 min 00 sec. - 1 to 2 bar - 1 min. 35 sec.  Tyre size 33 x 12.50 R15:  - 0 to 2 bar - 4 min 20 sec. - 1 to 2 bar - 2 min. 05 sec.  Tyre size 35 x 12.50 R15:  - 0 to 2 bar - 5 min. 20 sec. - 1 to 2 bar - 2 min. 45 sec. Do decisions put you under too much pressure? Which VIAIR compressor is the right one for me? Is the small mobile 75P for the cigarette lighter enough or should it be the Constant Duty built-in solution? Our new VIAIR compressor chart (see pictures) is guaranteed to help you get back on track and quickly make the right choice. VIAIR is the market leader for automotive and off-road compressors and sets the standard in terms of workmanship and performance. As a direct importer of VIAIR products, we have a whole range of solutions in our assortment. Our new compressor chart compares the Nakatanenga VIAIR range by tyre size, power source, capacity/performance and accessory port. You can quickly determine the right compressor at a glance. Our smallest model, the VIAIR 75P is a mobile compact solution for emergencies or occasional off-road use with tyres up to 29". The 75P is powered from the cigarette lighter. For larger tyres and fast pressure adjustment, battery-powered compressors such as the VIAIR 400P or 400P-A with automatic on/off switch are recommended. Those who regularly go off-road, need to inflate thick 37" tyres or want to power pneumatic tools on the road should opt for the Constant Duty OnBoard-Air Kit for permanent installation. Please note:  We have adjusted our Viair range. You will still find all current products. We have decided to reduce the range in order to guarantee better availability, among other things. 

VIAIR 400P - Mobile compressor 12 Volt Compressor set from VIAIR model 400P with a delivery rate of 65 litres/minute and 12 volt operating voltage in a portable version. As a pioneer and market leader in the field of automotive compressors, VIAIR has set the highest quality standards that apply to all VIAIR compressor models and series. Here is a small excerpt of the most important features: - stainless steel valves guarantee long-lasting and optimum shut-off times - generously designed cooling fins on cylinders optimised for design ensure maximum air dissipation and longer service life - anodised cylinder running surfaces increase protection against abrasion - the piston motor with PTFE piston rings ensures the lowest friction and thus optimum smooth running and service life characteristics - the motors are protected against splash water and thus maximally resistant to corrosion - an integrated, automatic overheating protection protects the longevity of the compressors - CE marking.  The VIAIR compressor kit model 400P has the following scope of delivery:  7.5 metre spiral air hose  2.5 metre battery cable with battery terminals  tyre inflator incl. pressure gauge  aluminium stand or plate  connection from stand to compressor by vibration-reducing silent blocks  replaceable air filter  battery cable with integrated fuse holder incl. 40 amp fuse  three additional valve adapters  a high quality carrying bag  The VIAIR Compressor Kit Model 400P has the following technical features: suitable for tyre sizes max. 35x12.50R15  delivery volume: at 0 bar 65 l/min, at 3 bar 44 l/min, at 5 bar 33 l/min and at 7 bar 22 litres per minute  max. air pressure: 10 Bar  max. voltage: 12 Volt max. current consumption: 30 amps   max. ambient temperature for compressor operation: 70° Celsius  min. ambient temperature for compressor operation: -40° Celsius  max. possible operating time, e.g. at 22°C ambient temperature: 20 minutes at 7 bar, after which the compressor should be paused for approx. 40 minutes. compressor should pause for approx. 40 minutes  with on/off switch  dimension: length 28 cm / width 15 cm / height 19 cm  weight: 4.8 Kg  protection class: IP54 Example filling times for the VIAIR Compressor Kit Model 400P: Tyre size 31 x 10.50 R15: 0 to 2 bar - 3 min 00 sec.  1 to 2 bar - 1 min. 35 sec.  Tyre size 33 x 12.50 R15:  0 to 2 bar - 4 min 20 sec.  1 to 2 bar - 2 min. 05 sec.  Tyre size 35 x 12.50 R15:  0 to 2 bar - 5 min. 20 sec.  1 to 2 bar - 2 min. 45 sec. Do decisions put you under too much pressure? Which VIAIR compressor is the right one for me? Is the small mobile 75P for the cigarette lighter enough or should it be the Constant Duty built-in solution? Our new VIAIR compressor chart (see pictures) is guaranteed to help you get back on track and quickly make the right choice. VIAIR is the market leader for automotive and off-road compressors and sets the standard in terms of workmanship and performance. As a direct importer of VIAIR products, we have a whole range of solutions in our assortment. Our new compressor chart compares the Nakatanenga VIAIR range by tyre size, power source, capacity/performance and accessory port. You can quickly determine the right compressor at a glance. Our smallest model, the VIAIR 75P is a mobile compact solution for emergencies or occasional off-road use with tyres up to 29". The 75P is powered from the cigarette lighter. For larger tyres and fast pressure adjustment, battery-powered compressors such as the VIAIR 400P or 400P-A with automatic on/off switch are recommended. Those who regularly go off-road, need to inflate thick 37" tyres or want to power pneumatic tools on the road should opt for the Constant Duty OnBoard-Air Kit for permanent installation. Please note:  We have adjusted our Viair range. You will still find all current products. We have decided to reduce the range in order to guarantee better availability, among other things.  Adapters with variable nozzle guides can be found here in our shop. The adapters are compatible with our VIAIR compressors.

Compressor set from VIAIR model 400P automatic with a delivery rate of 65 litres/minute and 12 volt operating voltage in a portable version with ‘comfort operation’ As a pioneer and market leader in the field of automotive compressors, VIAIR has set the highest quality standards that apply to all VIAIR compressor models and series. Here is a small excerpt of the most important features:   Stainless steel valves guarantee long-lasting and optimum shut-off times generously dimensioned cooling fins on design-optimized cylinders ensure maximum air dissipation and longer service life Anodized cylinder running surfaces increase protection against abrasion the piston motor with PTFE piston rings ensures the lowest friction and therefore optimum smooth running and service life the motors are protected against splash water and are therefore highly resistant to corrosion integrated, automatic overheating protection protects the longevity of the compressors CE marking The VIAIR compressor kit model 400PA has the following scope of delivery: 9.5 meter spiral air hose  2.5 meter long battery cable with battery terminals  Tire inflator incl. pressure gauge  Aluminum stand or plate  Connection from the base to the compressor via vibration-reducing silent blocks  Replaceable air filter  Battery cable with integrated fuse holder incl. 40 amp fuse  Three additional valve adapters a high-quality carrying bag The VIAIR compressor kit model 400PA has the following technical features: suitable for tyre sizes max. 35’  Automatic switch-off when no air is required. Simply press the inflation gun to switch the compressor on again  Delivery volume: at 0 bar 65 l/min, at 3 bar 44 l/min, at 5 bar 33 l/min and at 7 bar 22 litres per minute  Max. air pressure: 10 bar  Max. voltage: 13.8 volts  max. current consumption: 30 amps  max. ambient temperature for operating the compressor: 70° Celsius  min. Ambient temperature for operating the compressor: -40° Celsius  max. possible operating time e.g. at 22°C ambient temperature: 20 minutes at 7 bar, after which the compressor should pause for approx. 40 minutes  Dimensions: length 28 cm / width 15 cm / height 19 cm  Weight: 4.9 kg  Protection class: IP54  Do decisions put you under too much pressure? Which VIAIR compressor is the right one for me? Is the small mobile 75P for the cigarette lighter enough or should it be the Constant Duty built-in solution?If you're stuck for ideas, our new VIAIR compressor chart (see pictures) is guaranteed to help you get back on track and make the right choice quickly. VIAIR is the market leader for automotive and off-road compressors and sets the standard in terms of workmanship and performance. As a direct importer of VIAIR products, we have a whole range of solutions in our assortment.Our new compressor table compares the Nakatanenga VIAIR range by tyre size, power source, capacity/performance and accessory connection. The right compressor can be quickly determined at a glance. Our smallest model, the VIAIR 75P, is a compact mobile solution for emergencies or occasional off-road use with tyres up to 29’. The 75P is powered from the cigarette lighter. For larger tyres and rapid pressure adjustment, battery-powered compressors such as the VIAIR 400P or 400P-A with automatic switch-on and switch-off are recommended. If you are regularly in off-road use, need to inflate thick 37’ tyres or want to power pneumatic tools on the road, you should opt for the Constant Duty OnBoard-Air Kit for permanent installation.Adapters with variable nozzle guides can be found here in our shop. The adapters are compatible with our VIAIR compressors.Please note:We have adapted our Viair range. You will still find all standard products in our shop. One of the reasons we have decided to reduce the range is to guarantee better availability.

VIAIR 5-in-1 Inflator/Air Deflator Spiral Hose Fabric Reinforced 120 PSI MANOMETER - fabric reinforced spiral hose- Continuous inflation/deflation- Internally braided with quick release couplings- Intermittent deflation- 1/4" quick release coupling with male thread- 3-piece set of inflation nozzles- Air chuck with locking lever- incl. storage bagPlease store the hose in the supplied bag when not in use.Make sure that the hose does not come into contact with the head of the compressor during use (risk of melting).

Compressor VIAIR 88Pwith a Capacity of 41 L/Min and a 12V plug in a portable Design This compressor is the successor of the very popular compressor-set 85P. As pioneer and industry leader of automotive compressors, VIAIR sets the highest quality standards. A few of the most important features are: Stainless steel valves for guaranteed and optimal sealing  lavish cooling vents allowing for maximum efficiency and longer operating times  anodized cylindertreading increasing efficency aswell as allowing for a longer life span  the motor is protected from splashing water and with that resistant to corrosion  an integrated heat-sensor protects the compressor from the inside and guarantees a longer life span  CE marking The VIAIR Compressor Kit Model 88P shipps with: 4.8 meter hose, inflation hose incl. deflation-option 3.0 meter batterycable with battery clamps Batterycable with integrated safety switch and 25 A fuse   three additional valve adapters  The VIAIR Compressor Kit Model 88P's specifications: optimal for Tiresizes up to max. 33" Capacity: at 0 Bar 41 L/ Min, at 3 Bar 26 L/ Min and at 5 Bar 15 Liter per Minute  max. Air-pressure: 8 Bar  max. Voltage: 13.8 Volt  max. Operating-current: 20 Ampere  max. operating temperatures: 70° Celsius  min. operating temperatures: -20° Celsius  max. operating time e.g. at 22°C: 25 minutes at 2 Bar, after that the compressor should cool about 40 minutes Dimensions: length 25 cm / width 8 cm / hight: 14 cm weight: 2.2 kg  Schutzklasse: IP53 Exemplary filling times for the VIAIR Compressor Kit Model 88P:Tiresize 31x 10.50 R15:  0 to 2 Bar - 3 Min. 50 Sek. 1 to 2 Bar - 2 Min. 05 Sek.  Tiresize 33 x 12.50 R15:  0 to 2 Bar - 5 Min. 45 Sek.  1 to 2 Bar - 2 Min. 56 Sek.  Are you putting too much pressure on decisions? Which VIAIR compressor is the right one for me? Is the small mobile 75P enough for the cigarette lighter or should it be the Constant Duty installation solution? In the event of a decision jam, our new VIAIR compressor chart (see pictures) will help you get back into the green and quickly make the right choice. VIAIR is the market leader for automotive and off-road compressors and sets the benchmark in terms of workmanship and performance. As a direct importer of VIAIR products, we have a whole range of solutions in our product range. Our new compressor table compares the Nakatanenga VIAIR range to tire size, power source, capacity / performance and accessory connection. At a glance, you can quickly determine the right compressor. Our smallest model, the VIAIR 75P is a compact mobile solution for emergencies or occasional off-road use on tires up to 29 ".The 75P is powered by the cigarette lighter, for larger tires and quick pressure adjustment we recommend using battery-powered compressors such as the VIAIR 400P or 400P-A with automatic on / off switch If you regularly use off-road tires, if you need to fill thick 37 "tires or if you want to power pneumatic tools on the way, you should opt for the Constant Duty OnBoard-Air Kit.

VIAIR 89P-RVS - the compressor especially for campers and motorhomes Technical data:- Suitable for tyre sizes max. 245/70R19.5- Delivery volume: at 0 bar 41.7 L/min, at 3 bar 31.5 L/min, at 5 bar 23.6 L/min and at 7 bar 14.9 litres per minute- Max. working pressure: 120 PSI/8.2 bar- max. voltage: 13.8 volts- max. current consumption: 20 amps- max. ambient temperature for operating the compressor: 70° Celsius- min. ambient temperature for compressor operation: -20° Celsius- max. possible operating time: 25 minutes at 30 PSI- with on/off switch- dimensions (L x W x H): 25cm x 8,1cm x 14,2cm- weight: 2,15 Kg- Protection class: IP53Features:- Stainless steel valves guarantee long-lasting and optimal shutter speeds- generously designed cooling fins on cylinders optimised for design ensure maximum air dissipation and longer service life- Anodised cylinder surfaces increase protection against abrasion- the piston motor with PTFE piston rings ensures low-friction and optimised smooth running and a long service life- the motors are protected against splash water and thus maximally resistant to corrosion- Integrated, automatic overheating protection for a long compressor service life- CE markingScope of delivery:- 6 metre air hose- 3 metre battery cable with battery terminals- Tyre inflator (solid brass)- Pressure gauge on compressor- Aluminium stand or plate- Connection from stand to compressor by vibration-reducing silent blocks- Replaceable air filter- three additional valve adapters- a high-quality carrying bag Example filling times for the VIAIR compressor kit model 89P-RVS:50 to 60 PSI / 3.4 to 4.1 bar 1 min. 11 sec. (±05 sec.)60 to 80 PSI / 4.1 to 5.5 bar 3 min. 28 sec. (±10 sec.)80 to 90 PSI /5.5 to 6.2 bar 1 minute. 40 sec. (±05 sec.)The model designation "RVS" stands for "RV-Safe", as these compressors have been specially developed and tested for the motorhome market.A mobile and above all portable compressor should never be missing on board a camper or motorhome. The VIAIR 89P-RVS is such a mobile and lightweight 12-volt compressor, specially designed for Class B motorhomes. This compressor inflates most Class B (CP) tyres from 5.5 bar to 6.2 bar (80 to 90 PSI - follow manufacturer's instructions!) in less than 2 minutes. The 89P-RVS has a new and improved longer air hose to reach the tyres comfortably.The tyres are the connecting element between the vehicle and the road. Enormous forces are transmitted over a relatively small area. To be able to guarantee this in the best possible way, regular checking of the tyre pressure is essential, especially for motorhomes. Don't forget to check the spare wheel as well. However, this can be quite inconvenient for many campers, as the spare wheel must first be removed from underneath the floor - something that people tend to do without at the petrol station.For an RV compressor, power is of course crucial. Here, the 89P-RVS offers a maximum working pressure of more than 8 bar - quite sufficient for all compressed air applications you are confronted with as a camper. Please note: The 89P-RVS is not compatible with Presta bicycle valves!Due to the high currents that flow when operating the compressor, it must only be connected directly to the battery via the supplied clamps. However, with the 6m hose, which is also included in the delivery, you can also reach the rear wheels comfortably.As a pioneer and market leader in the field of automotive compressors, VIAIR has set the highest quality standards that apply to all VIAIR compressor models and series. Adapters with variable nozzle guides can be found here in our shop. The adapters are compatible with our VIAIR compressors. Please note: We have adapted our Viair range. You will still find all standard products. One of the reasons we have decided to reduce the range is to guarantee better availability.

VIAIR Air Connection Extension 5 Piece Kit Features: 1/4″ NPT (F) Quick Connect Coupler 1/4″ NPT (F) Quick Connect Stud (2) 1/4″ NPT Compression Fittings (For 1/4″ Line) 15 ft. Air Line Tubing 3 Air Line Clips 5″ Continuous Grommet

Blow gun with thumb valve This gun can be easily connected to any air system to create a quick blast of air to blow dust out of a filter. The blow gun has a thumb valve to release the air and a 6.35 mm quick connect screw for the air source. Packaging dimensions: 15.2 x 15.2 x 15.2 cm. Weight: 0.2 kg.

VIAIR Compressor Kit - CONSTANT DUTY Compressor system kit from VIAIR CONSTANT DUTY OBA version with compressor 450C delivery rate 51 L/ minute for 12Volt operating voltage incl. 9.5L tank and mounting kitTechnical data:     suitable for inflating tyres and operating small air tools or air horns    max. voltage: 13,8 Volt    max. 10 bar working pressure    max. current consumption: 23 amps    max. ambient temperature for operating the compressor: 70° Celsius    min. Ambient temperature for compressor operation: -40° Celsius    max. possible operating time e.g. at 22°C ambient temperature approx. 60 minutes    Protection class: IP67Exemplary filling times for the compressor system kit of VIAIR design CONSTANT:Air receiver with 10 litres : - 0 to 9.9 bar - 3 min. 02 sec. - 7.5 to 9.9 bar - 59 sec. Tyre size 35" x 12.50" :- 0 to 2.0 bar - 6 min 55 sec.- 1.0 to 2.0 bar - 3 min. 30 sec. Tyre size 37" x 12.50" : - 0 to 2.0 bar - 7 min 56 sec. - 1.0 to 2.0 bar - 4 min. 09 sec.Compressor system kit from VIAIR model CONSTANT has the following scope of delivery:1 x VIAIR 450C compressor 1 x 9,5 l air tank 1 x 10m air hose 1 x 1/4" quick coupling (F) 1 x 1/4" NPT connector (F) 1 x Control panel with on/off switch and pressure gauge 1 x Pressure switch with relay (7,2 - 10 bar) 1 x Reducer (1/8" NPT F to 1/4" NPT M)

CONTINOUS DUTY, 485C CE-Compressor, 12V Specifications:   12-volt Permanent magnet motor Duty cycle: 100 % at 200 PSI (13.7 bar) Max. Working pressure: 200 PSI Max. Air tank size: 5.0 gallons (approx. 19 litres) Max. Power consumption: 23 Amps Protection class: IP67 Dimensions: 270 mm L x 105 mm W x 165 mm H Net weight: 4.99kg. As a pioneer and market leader in the field of automotive compressors, VIAIR has set the highest quality standards that apply to all VIAIR compressor models and series. Here is a small excerpt of the most important features:Stainless steel valves guarantee long-lasting and optimised shut-off timesgenerously dimensioned cooling fins on design-optimised cylinders ensure maximum air dissipation and a longer service lifeAnodised cylinder running surfaces increase protection against abrasionthe piston motor with PTFE piston rings ensures the lowest friction and therefore optimum smooth running and service life propertiesthe motors are protected against splash water and are therefore highly resistant to corrosionintegrated, automatic overheating protection protects the longevity of the compressorsCE labellingTechnical data:    2.5 gallons (approx. 9.5 litres) VIAIR air tank (200 PSI / 13.7 bar) 485C Stealth Black VIAIR compressor with thermal overload protection Digital tyre inflation gun with 180 PSI (12.4 bar) Braided black spiral hose with quick-release coupling 1/4’ NPT quick coupling bolt (F) 1/4’ NPT quick coupling (F) Dashboard indicator with ON / OFF switch Sealed pressure switch (165 PSI (11.3 bar) on, 200 PSI off (13.7 bar) Reducer 1/8‘ NPT (F) to 1/4’ NPT (M) Reducer 3/8‘ NPT (F) to 1/4’ NPT (M) 1/4’ NPT 250 PSI safety valve 1/4’ NPT drain cock (3) 1/4’ NPT compression fittings Suitable for tyres up to 37 inches 4-inch protective sleeves (grommet strips) for air line hoses - Make sure the air line hoses are protected from the sharp edges of the borehole with the supplied grommet strip.Please note: Use thread sealant for proper installation. Thread tape is not recommended. When properly sealed, the recommended torque for 1/8’ is 13.5 Nm. The recommended torque for 1/4‘ and 3/8’ is 22 Nm.